Is There Fluoride in Boston Water?
Yes, fluoride is added to Boston’s utility water, which averaged 0.71 mg/L in the 2025 utility report.
Is fluoride added to Boston water?
Boston’s public water is fluoridated, not merely water with naturally occurring fluoride. The CDC lists the Boston Water & Sewer Commission as a consecutive system: it receives water from another public water system and distributes it to its customers. The listing identifies the Massachusetts Water Resources Authority, or MWRA.
Natural fluoride and added fluoride are different questions. Fluoride can occur naturally in water, but its presence alone does not establish that a system adds it. To compare other locations, see fluoride in tap water by city.
How much fluoride is in Boston water?
The utility’s 2025 drinking water test results report an average fluoride concentration and a range of measured results. The table compares those results with the U.S. Public Health Service recommendation and EPA standards. The utility report uses parts per million; for these dilute water measurements, those values are approximately equivalent to milligrams per liter.
| Measurement or reference | Fluoride level |
|---|---|
| Boston utility report, 2025 measured average | 0.71 mg/L |
| Boston utility report, 2025 reported measurement range | 0.4–0.8 mg/L |
| U.S. Public Health Service recommended level for community water fluoridation | 0.7 mg/L |
| EPA secondary standard | 2.0 mg/L |
| EPA maximum contaminant level | 4.0 mg/L |
The 2025 reported average was slightly above the recommended level and below both EPA values. The maximum contaminant level is an enforceable drinking water standard; the secondary standard is non-enforceable. The Public Health Service level is a recommendation for community water fluoridation, rather than an EPA maximum.
The utility’s average describes its reported test results, not a separate measurement at every address. The reported range also should not be read as a guarantee of the concentration at a particular tap. A home test or laboratory analysis can answer a more specific question about the water you use.
How does Boston compare with Suffolk County and Massachusetts?
In the CDC’s 2020 data, 78.3% of the Suffolk County population served by public water systems received fluoridated water. The corresponding figure for Massachusetts was 57.8% of the population served by public water systems.
Those figures describe coverage, not the concentration of fluoride in water. They are county and state context, not measurements for Boston’s utility or estimates of the current percentage in a particular neighborhood. They also use the population served by public water systems as their basis, rather than all residents.
What is Massachusetts law or policy on fluoridation?
The cited sources identify Boston’s system as fluoridated and provide county and state coverage figures. They do not establish whether Massachusetts has a statewide fluoridation requirement or describe the state’s policy for individual communities.
Boston’s status should therefore not be taken as proof of a legal requirement for every Massachusetts water system. For a current legal or policy answer, consult Massachusetts officials or the relevant local water supplier.
How can you check your water or remove fluoride?
Start with your water supplier’s latest quality report, then consider testing if you want a result for your own tap. A home fluoride test kit can provide an indication; check that the kit measures fluoride and follow its sampling instructions. For more guidance, see how to test water quality at home.
For a laboratory result, ask a drinking water laboratory that tests for fluoride how to collect and submit a sample. If you use a filter, you can ask about testing water both before and after treatment to assess what reaches your glass.
If you want to reduce fluoride, look for a reverse-osmosis system, distiller or activated alumina filter independently certified for fluoride reduction. Not every pitcher or carbon filter removes fluoride. Check the specific product’s certification and follow its maintenance and replacement instructions; our guide to the best pitcher water filters can help you compare options.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Boston fluoride data come from?
The 2025 Boston drinking water test results provide the measured average and range used above. The report identifies fluoride as an additive; its figures are utility results rather than a test of your individual tap.
The CDC fluoridation status report lists the Boston Water & Sewer Commission as fluoridated and classifies it as a consecutive system for 2025. It is the source for the system’s status, not the measured average.
The CDC state and county fluoridation dataset supplies the 2020 Suffolk County and Massachusetts coverage figures. Those percentages describe people served by public water systems receiving fluoridated water, so they answer a different question from the utility’s concentration measurements.
Frequently asked questions
Does boiling Boston tap water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Why does the utility report use ppm instead of mg/L?
For dilute drinking water measurements, 1 part per million is approximately equal to 1 mg/L. The two notations express essentially the same concentration in this context.