Is There Fluoride in Benton Harbor Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Benton Harbor utility adds fluoride, but its fluoride level is not reported. For comparisons with other communities, see fluoride in tap water by city.

Does Benton Harbor add fluoride to its water?

Benton Harbor is listed as fluoridated in the CDC’s 2025 water-system status report. The listed fluoride product is sodium fluoride, or NaF, so the status reflects added fluoride rather than a finding of naturally occurring fluoride alone.

The listing identifies the utility as BENTON HARBOR, with system ID MI0000600. It establishes the reported fluoridation status, not the concentration at a particular tap. If your water comes from a different supplier or a private well, the Benton Harbor utility’s status does not establish what is in your water.

How much fluoride is in Benton Harbor water?

A measured fluoride concentration for Benton Harbor is not reported in the available records. There is also no reported measurement year or basis, such as a sample result, average or range. The standards below are reference points, not Benton Harbor test results.

Fluoride levelWhat it represents
Not reportedBenton Harbor’s measured concentration; no measurement year or basis is available
0.7 mg/LUS Public Health Service recommended level for community water fluoridation
2.0 mg/LEPA secondary standard, which is not federally enforceable
4.0 mg/LEPA maximum contaminant level, an enforceable drinking-water limit

The recommended level is not the same kind of number as the EPA limit. Because Benton Harbor’s measured level is unavailable here, these figures cannot establish how its water compares with any of the three reference values.

If you have questions about fluoride, ask a dentist or doctor.

How does Benton Harbor compare with Berrien County and Michigan?

In 2020, 74.3% of the population served by public water systems in Berrien County received fluoridated water, according to CDC data. The corresponding figure for Michigan was 89.3% of the state population served by public water systems.

AreaPopulation served by public water systems receiving fluoridated waterYear
Berrien County74.3%2020
Michigan89.3%2020

These are coverage percentages, not measurements of fluoride concentration. The county figure covers public water systems across Berrien County; it is not a measurement or coverage percentage for the Benton Harbor utility alone. Neither percentage describes private-well water.

Does Michigan law require water systems to add fluoride?

The available information does not state Michigan’s fluoridation policy or whether state law requires public water systems to add fluoride. Benton Harbor’s reported status cannot answer that question for other Michigan systems.

The statewide percentage shows how much of the public-water-system population received fluoridated water in 2020; it does not, by itself, establish what state law requires. For current policy, check Michigan’s drinking-water program or the current state law.

How can you check your water or remove fluoride?

Start by confirming which utility supplies your address. Ask the supplier for its latest water-quality report and the most recent fluoride result, including the sampling date, units and whether the number is a single result, an average or a range. A status of “fluoridated” alone does not tell you the measured level at your tap.

For an individual result, use a laboratory that offers fluoride testing for drinking water and follow its instructions for collecting and submitting the sample. Our guide to how to test water quality at home explains how to approach water testing.

If you want to reduce fluoride, look for a treatment system independently certified specifically for fluoride reduction. Reverse osmosis and appropriately designed activated-alumina systems can reduce fluoride, but performance depends on the product and its maintenance. Follow the manufacturer’s replacement schedule and check the performance data for the exact model.

Not every filter or pitcher is designed to reduce fluoride. The guide to the best pitcher water filters can help you compare options; verify each model’s fluoride-reduction certification before relying on it.

Where does the fluoride data come from?

The CDC’s 2025 My Water’s Fluoride status report identifies the Benton Harbor public water system as fluoridated. The available record also lists sodium fluoride as the product, but it does not provide a measured Benton Harbor level.

The county and state percentages come from the CDC’s 2020 community water fluoridation dataset. Those figures provide population-level context for public water systems, not a current tap test. For a more recent local concentration, request the utility’s latest report or arrange a fluoride-specific test.

Frequently asked questions

Does boiling Benton Harbor water remove fluoride?

No. Boiling does not remove fluoride, and evaporation can concentrate it in the remaining water.

Does letting Benton Harbor water stand remove fluoride?

No. Letting water stand is not a reliable way to remove fluoride; use a treatment system rated specifically for fluoride reduction if you want to reduce it.