Is There Fluoride in Beaumont Water?
Yes, the Beaumont water utility adds fluoride; its measured mean was about 0.63 mg/L in 2012–2019.
Is fluoride added to Beaumont water?
Beaumont’s public water utility is reported as fluoridated, meaning the utility adds fluoride rather than relying only on fluoride that may occur naturally in water. The CDC’s 2025 fluoridation status report lists CITY OF BEAUMONT, water system TX1230001, as fluoridated. The reported fluoride product is fluorosilicic acid, H2SiF6.
The status report identifies the utility, not every water source in the Beaumont area. If you want to compare Beaumont with other systems, see fluoride in tap water by city.
How much fluoride has been measured in Beaumont water?
The EPA’s Six-Year Review 4 compliance monitoring data include 10 finished-water samples for Beaumont from 2012–2019. Fluoride was detected in eight samples. The mean of the detected samples was 0.63 mg/L, and the maximum reported result was 0.85 mg/L.
| Measurement or benchmark | Fluoride level | Basis |
|---|---|---|
| Beaumont mean | 0.63 mg/L | Mean of detected finished-water compliance samples, 2012–2019 |
| Beaumont maximum | 0.85 mg/L | Highest finished-water sample result, 2012–2019 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
The historical mean was below the 0.7 mg/L recommendation, and the historical maximum was below both EPA standards. These comparisons do not establish the fluoride level at a particular tap today. The measurements also do not distinguish added fluoride from any naturally occurring fluoride.
The three benchmarks have different roles: the Public Health Service figure is a recommended level for community water fluoridation, while the two EPA figures are drinking-water standards. A historical sample comparison alone does not establish a utility’s current compliance status.
How does Beaumont compare with Jefferson County and Texas?
The CDC’s 2020 state and county data report that 72.5% of Jefferson County’s public water system population received fluoridated water. For Texas as a whole, the corresponding figure was 71.0% in 2020.
These percentages describe coverage among people served by public water systems, not fluoride concentrations. The Jefferson County figure is not a measurement for Beaumont’s utility, and neither percentage tells you which water system serves a particular address.
What does Texas law say about fluoridation?
The available records do not establish whether Texas law requires utilities to add fluoride or whether a statewide mandate applies. The CDC coverage figures and Beaumont’s reported utility status describe water-system practices, not the text or application of a state law.
For current legal requirements, consult Texas statutes or ask the state drinking-water regulator. Beaumont’s reported practice should not by itself be taken as proof of a statewide requirement.
How can I check my water or remove fluoride?
First, identify the utility serving your address on your water bill. If it is Beaumont’s public water system, ask the utility for its latest water quality report and current fluoride monitoring information. If you use a private well or another supplier, Beaumont’s utility results may not describe your water.
For a result specific to your tap, use a laboratory that tests drinking water for fluoride and follow its sampling instructions. A current report can describe the system’s monitoring, while a tap sample can show the concentration in the water you collected. See how to test water quality at home for more on arranging a test.
If you want to reduce fluoride, reverse osmosis systems and some activated alumina filters can do so. Check that the specific model has independent certification for fluoride reduction, follow the manufacturer’s replacement schedule, and consider testing the treated water. A pitcher or carbon filter should not be assumed to remove fluoride simply because it filters water; compare options in our guide to the best pitcher water filters.
Who can answer questions about fluoride?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Beaumont data come from?
The CDC’s 2025 status report identifies Beaumont’s utility by name and water system ID. Its separate 2020 dataset supplies the Jefferson County and Texas coverage percentages.
The EPA’s Six-Year Review 4 provides the historical finished-water results from 2012–2019. The sources answer different questions: the CDC reports fluoridation status and coverage, while the EPA data records sample results. None of those historical figures is a substitute for a current test of your own tap.
Frequently asked questions
Does boiling Beaumont water remove fluoride?
No. Boiling does not remove fluoride; evaporation can increase its concentration in the remaining water.
Can I tell whether Beaumont water contains fluoride by tasting it?
Taste is not a reliable way to determine the fluoride concentration. Use a water report or a drinking-water test instead.
What does mg/L mean in a fluoride result?
Mg/L means milligrams per liter, a measure of the amount of fluoride in water.