Is There Fluoride in Baltimore Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Baltimore’s utility adds fluoride; its measured mean was about 0.74 mg/L in 2012–2019.

For comparisons with other systems, see fluoride in tap water by city.

Does Baltimore add fluoride to its water?

Yes. Baltimore’s public water system is listed as fluoridated, meaning the utility adds fluoride rather than the listing being based solely on naturally occurring fluoride. The listing identifies the system as BALTIMORE CITY, system ID MD0300002.

The system listing does not provide a data year. The measured concentration below comes from a separate historical set of finished-water samples, so it should not be taken as a current reading at every Baltimore tap.

How much fluoride is in Baltimore water?

Baltimore’s measured mean was 0.74 mg/L in finished-water compliance samples from 2012–2019. There were 40 samples, and fluoride was detected in all 40; the mean is based on those detected samples. The maximum measured result was 1.62 mg/L over the same period and sample set.

Measure or standardFluoride concentrationBasis or period
Baltimore measured mean0.74 mg/LDetected finished-water compliance samples, 2012–2019
Baltimore measured maximum1.62 mg/LFinished-water compliance samples, 2012–2019
US Public Health Service recommended level0.7 mg/LCommunity water fluoridation recommendation
EPA secondary standard2.0 mg/LNon-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable drinking-water limit

The historical mean was slightly above the recommended 0.7 mg/L level. Both the mean and maximum were below the EPA’s 2.0 mg/L secondary standard and 4.0 mg/L limit. The recommendation is not the same thing as the enforceable limit.

These figures describe the samples in the historical dataset, not a continuous reading or a guarantee of today’s concentration. A current report or a test of your own water is more useful for checking present conditions.

How do Baltimore and Maryland compare?

CDC coverage figures describe the percentage of people served by public water systems who received fluoridated water in 2020:

AreaPopulation served by public water systems receiving fluoridated waterYear
Baltimore City County100.0%2020
Maryland93.7%2020

The Baltimore City County figure is county-level context, not a concentration measurement from the city utility. Neither percentage establishes the fluoride level at a particular address, and the figures do not necessarily describe residents using private wells. They are also historical coverage figures, not a statement about current coverage.

What does Maryland law say about fluoridation?

The information here does not establish whether Maryland has a statewide fluoridation requirement or which policy governs Baltimore’s program. Baltimore’s listing as fluoridated shows the reported status of its public water system; it does not, by itself, establish the wording of a state law or a statewide mandate.

To check current requirements, ask the relevant Maryland drinking-water authority or Baltimore’s water utility for the applicable policy. Keep the policy question separate from the historical sampling results: one concerns what is required or authorized, while the other records measured concentrations.

How can you check or remove fluoride from your water?

Start with your water provider’s current water-quality report and confirm that the report covers your address. If you use a private well, the public-system results above do not tell you the fluoride concentration in your well.

For an address-specific result, use a laboratory that tests drinking water for fluoride and follow its sample-collection instructions. Our guide to how to test water quality at home explains how to approach testing. Compare a result reported in mg/L with the standards above, while keeping the sampling date and location in mind.

If you want to reduce fluoride, look for a treatment device certified specifically for fluoride reduction. Reverse-osmosis systems and some activated-alumina filters can reduce fluoride, but performance depends on the particular product and its maintenance. Do not assume that every carbon filter or pitcher removes it; check the model’s certification and replacement instructions. See our guide to the best pitcher water filters and verify the fluoride claim for any model you consider.

Who should ask about fluoride?

Anyone with questions about fluoride in their water should ask a dentist or doctor.

Where does the Baltimore fluoride data come from?

The CDC’s My Water’s Fluoride system list, retrieved November 3, 2026, lists Baltimore’s system as fluoridated but does not show a data year on that page.

The concentration figures come from the EPA Six-Year Review 4 compliance monitoring data, covering finished-water samples for Baltimore’s system from 2012–2019. The mean and maximum summarize that sample set; they are not current tap measurements.

The county and state coverage percentages come from the CDC community water fluoridation state and county dataset for 2020. Coverage percentages and measured concentrations answer different questions: the former describe who received fluoridated public water, while the latter describe fluoride found in samples.

Frequently asked questions

Does boiling Baltimore water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

What does mg/L mean on a water report?

It means milligrams per liter, a measure of the amount of a substance in a volume of water. For dilute water measurements, 1 mg/L is approximately equal to 1 part per million.