Is There Fluoride in Austin Water?
Yes, Austin Water adds fluoride; its 2025 water quality report lists an average of 0.66 mg/L.
Does Austin add fluoride to its water?
Austin Water adds a fluoride product identified as H2SiF6. The CDC’s 2025 fluoridation status report identifies the City of Austin Water & Wastewater public water system as fluoridated.
Fluoride can also occur naturally in water, but natural fluoride alone is not the same as a utility adding fluoride. For other communities, see fluoride in tap water by city.
How much fluoride is in Austin water?
The 2025 Austin Water quality report reports these fluoride measurements:
| Measurement | Level | Year and basis |
|---|---|---|
| Average | 0.66 mg/L | 2025 utility report average |
| Low | 0.59 mg/L | 2025 utility report low measurement |
| High | 0.71 mg/L | 2025 utility report high measurement |
The report gives fluoride in parts per million, which is numerically equivalent to mg/L for these water measurements. The average summarizes the report’s results; it is not a live reading from every Austin tap.
| Federal reference | Level | What it represents |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A non-enforceable secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable drinking-water limit |
Austin’s reported 2025 average was slightly below the recommended 0.7 mg/L level and below both EPA standards. The report’s low and high measurements were also below the 2.0 mg/L and 4.0 mg/L standards.
How do Travis County and Texas compare?
In 2020, 84.2% of the public-water-system population in Travis County received fluoridated water. For Texas, the corresponding figure was 71.0%, according to CDC state and county fluoridation data.
These are population percentages for people served by public water systems, not measurements of fluoride at a particular address. They describe 2020 and should not be treated as current percentages or as a substitute for checking the system serving a home.
What is the Texas law or policy on fluoridation?
The fluoridation data do not establish what Texas law requires or whether a statewide mandate applies. Austin Water’s reported status shows that its system adds fluoride; it does not, by itself, establish the policy for every water system in Texas.
For a legal or policy question, check current state and local rules or ask the agency responsible for the water system. Keep the date and the specific system in mind when comparing a policy statement with a water quality report.
How can you check or remove fluoride from your water?
First, identify your water provider from your bill or ask your building manager. An Austin address does not, by itself, confirm that Austin Water is the provider; if another system serves you, ask that provider for its latest report and fluoride information.
A utility report describes the system’s results rather than the exact concentration at your tap. For a household measurement, ask a qualified drinking-water laboratory for a fluoride test and follow its instructions on the container, sampling and delivery. Our guide to how to test water quality at home explains how to approach testing.
If you want to reduce fluoride, look for a system independently certified for fluoride reduction, and check the certification for the exact model. Some reverse-osmosis systems and specialty filter media can reduce fluoride, but an ordinary activated-carbon filter should not be assumed to do so. Distillation can also reduce fluoride.
Check the manufacturer’s maintenance instructions and replacement schedule, and consider testing filtered water to verify performance. When comparing the best pitcher water filters, look for an explicit fluoride-reduction claim rather than assuming every pitcher removes it. Boiling water does not remove fluoride and can concentrate it as water evaporates.
Who should ask about fluoride?
If you have questions about fluoride in your water, ask a dentist or doctor.
Where does the information come from?
Austin Water’s annual report provides the 2025 low, high and average fluoride measurements. The CDC’s 2025 status report identifies Austin’s public system as fluoridated, while the CDC’s 2020 state and county dataset provides the broader population percentages.
Those sources answer different questions: the utility report gives measured concentrations, the status report indicates whether the system is fluoridated, and the county and state figures describe populations served. Check the latest report or contact your provider for information about your own supply.
Frequently asked questions
Does boiling Austin water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Does the 0.66 mg/L figure describe every Austin tap?
No. It is the average reported in Austin Water’s 2025 water quality report, not a measurement from every tap.
Does naturally occurring fluoride mean a water system is fluoridated?
No. Fluoride can occur naturally, while fluoridation means fluoride is added. Austin Water adds a fluoride product.