Is There Fluoride in Arkansas Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 85.8% of people on Arkansas community water systems received fluoridated water in 2020. That statewide figure does not establish whether a particular utility fluoridates its water or how much fluoride is in water at a given address. For comparisons with other locations, see fluoride in tap water by city.

How much of Arkansas’s water is fluoridated?

In 2020, 85.8% of people served by Arkansas community water systems received fluoridated water, according to CDC reporting. The percentage describes people served, not the proportion of Arkansas water systems or cities that fluoridate.

It also does not cover every possible source of drinking water. For example, a household using a private well should not use the community-water-system percentage to determine whether its own water contains fluoride.

The figure is a coverage statistic, not a measured statewide fluoride concentration. It cannot tell you the level in a particular supply, and the 2020 figure alone does not establish current coverage.

Fluoride can occur naturally in a water source; adding fluoride to a water supply is a separate practice. A finding of naturally occurring fluoride does not by itself establish that a utility fluoridates its water.

What is Arkansas’s law or policy on fluoridation?

The statewide coverage figure does not establish what Arkansas law requires or whether a particular utility is required to add fluoride. We could not confirm the current state law or policy from the source used here.

For a current policy answer, ask the Arkansas Department of Health or your water utility. If you want to know about a particular address, ask separately whether its supplier adds fluoride and whether fluoride occurs naturally in its source water. Those are different questions, and the statewide percentage cannot answer either one for an individual utility.

How can you find out about your own city or utility?

Start by identifying the water supplier for your address. The name may appear on a water bill; if water is included in rent or supplied through a building, the property manager may be able to identify the supplier.

Ask the utility for its most recent consumer confidence report, also called a drinking water quality report. Look for fluoride in the results and check the sampling dates as well as the report’s publication date. A report describes testing from a specified period; it is not necessarily a measurement from your tap today.

If the report lists a fluoride result, check its units and whether the number is an average, a range or another type of result. Ask the utility where the sample was taken and whether the reported water represents the supply serving your address. You can also ask whether the utility adds fluoride or whether the reported fluoride comes from the water source.

For a private well, a fluoride-specific laboratory test can give you information about your own water. Confirm that fluoride is included before ordering a test and follow the laboratory’s sampling instructions. Our guide to how to test water quality at home explains how to approach testing.

If you are considering filtration, do not assume that every pitcher reduces fluoride. Check the specific model’s certification and performance information for fluoride reduction; see our guide to the best pitcher water filters.

What do fluoride levels and standards mean?

Fluoride concentrations in water are commonly reported in milligrams per liter, written as mg/L. The following numbers have different roles, so they should not be treated as interchangeable:

LevelWhat it represents
0.7 mg/LThe US Public Health Service’s recommended level for community water fluoridation. It is a recommendation, not a maximum limit.
2.0 mg/LThe EPA’s secondary standard for fluoride, a non-enforceable federal guideline.
4.0 mg/LThe EPA’s maximum contaminant level for fluoride, an enforceable federal limit for public water systems.

Compare a local result with the relevant number only after checking its units, sampling date and basis. The Arkansas coverage percentage does not tell you whether any particular water sample is above or below one of these levels.

If you have questions about fluoride in your water, ask a dentist or doctor.

Where does the Arkansas data come from?

The Arkansas coverage figure comes from the CDC community water fluoridation state and county data, using information from the Water Fluoridation Reporting System. The figure cited here is for 2020 and describes the percentage of the population on community water systems receiving fluoridated water.

Use the CDC figure for statewide context, rather than as a substitute for a local water report or a test. To interpret a local result, retain its sampling date, units and location alongside the number: those details determine what the result can tell you about your water.

Frequently asked questions

Is fluoride measured in ppm the same as fluoride measured in mg/L?

For dilute water solutions, 1 part per million (ppm) is approximately 1 mg/L. Check the unit on the report before comparing a result with a standard.

Can you tell whether water contains fluoride by tasting it?

Taste is not a reliable way to determine whether fluoride is present or how much is in water.