Is There Fluoride in Arizona Water?
Yes, for most residents, because 57.7% of people on Arizona community water systems received fluoridated water in 2020. That statewide figure does not establish the fluoride level at any particular address. For comparisons with other locations, see fluoride in tap water by city.
How much of Arizona’s water is fluoridated?
In 2020, 57.7% of people served by Arizona community water systems received fluoridated water. The percentage describes people served by those systems, not a measured fluoride concentration and not necessarily the share of all Arizona residents.
The figure is a statewide snapshot, not a current reading for every utility. It does not identify the water supplied to your address or tell you whether a particular water system adds fluoride. A local report or a direct inquiry to the utility is the better source for those details.
Fluoridation means adjusting fluoride in a water supply; fluoride can also occur naturally in water without being added. Finding fluoride in a sample does not, by itself, establish that the water has been fluoridated.
What is Arizona’s law or policy on fluoride?
The statewide percentage does not establish whether Arizona has a statewide fluoridation requirement or what rules apply to an individual community. It should not be read as a statement that every Arizona utility adds fluoride, or that a particular utility is required to do so.
For the policy that applies to your water, ask your water provider whether it adds fluoride and what decision or rule governs its practice. You can also ask your city or town whether a local policy applies. Keep the policy question separate from the measured-level question: water may contain natural fluoride regardless of whether a utility adds it.
How can you find the fluoride level in your water?
Start by identifying your water provider. Your water bill may name the utility; if it does not, a landlord, property manager or local government may be able to identify the system serving your address. A city name alone is not always enough to identify the correct provider.
Look for the provider’s latest annual drinking water quality report, sometimes called a Consumer Confidence Report. Find fluoride in the contaminant table and check the reported concentration, the unit and the sampling year. The report’s publication year and the year a sample was collected may not be the same.
If the report lists a range or more than one water source, ask the utility which results are most relevant to your service area. Also ask whether fluoride is added, occurs naturally or comes from a combination of sources. A report may give a system-wide result rather than a measurement from your particular tap.
If you use a private well, the statewide community-water figure does not tell you what is in your well. Testing can provide an address-specific result; ask a laboratory about its fluoride test and sampling instructions. Our guide explains how to test water quality at home.
If you are considering filtration, do not assume that every pitcher removes fluoride. Look for a specific, independently certified fluoride-reduction claim and follow the product’s maintenance instructions. Our review of the best pitcher water filters can help you compare options.
What do the fluoride levels and standards mean?
Fluoride concentrations are commonly reported in milligrams per liter, written as mg/L. These three numbers serve different purposes; they are not interchangeable descriptions of the fluoride level in Arizona water.
| Level | What it means |
|---|---|
| 0.7 mg/L | The US Public Health Service’s recommended level for community water fluoridation. |
| 2.0 mg/L | The EPA’s secondary standard for fluoride. |
| 4.0 mg/L | The EPA’s enforceable maximum contaminant level for fluoride in public drinking water. |
The 0.7 mg/L recommendation is a fluoridation target, while the 4.0 mg/L figure is a regulatory limit. The 2.0 mg/L secondary standard is a separate benchmark. Compare a reported result with the appropriate number, and check the result’s sampling date and the water system it covers.
If you have questions about fluoride in your water, ask a dentist or doctor. Share your utility report or test result so they can see the level and sampling date.
Where does the Arizona figure come from?
The 57.7% figure for 2020 comes from the CDC’s community water fluoridation state and county data, drawn from its Water Fluoridation Reporting System. It describes the population served by community water systems receiving fluoridated water, rather than a statewide average concentration.
No measured Arizona fluoride concentration for a specific utility or address is established by that percentage. For a local number, use the utility’s report or a water test, and record both the concentration in mg/L and the year the sample was taken.
Frequently asked questions
Does boiling water remove fluoride?
No. Boiling does not remove fluoride, and evaporation can concentrate it in the remaining water.
Can you tell whether water contains fluoride by tasting it?
Taste is not a reliable way to determine whether water contains fluoride. Use a utility report or a laboratory test instead.