Is There Fluoride in Ann Arbor Water?
Yes, Ann Arbor’s utility adds fluoride, and its state-reported operational level averaged 0.63 mg/L across monthly values in 2025.
Is fluoride added to Ann Arbor water?
Ann Arbor’s public water system is reported as fluoridated, meaning the utility adds a fluoride product rather than relying only on naturally occurring fluoride. The reported product is fluorosilicic acid, H₂SiF₆. The CDC’s 2025 fluoridation status report lists the Ann Arbor system as fluoridated.
Naturally occurring fluoride and added fluoride are different descriptions: a water source can contain fluoride without a utility adding it. For comparisons with other systems, see fluoride in tap water by city.
The Ann Arbor system’s status does not establish the water supply for every address with an Ann Arbor mailing address. If you use a private well or are unsure which utility serves your home, check your own supply separately.
How much fluoride is in Ann Arbor water?
The state-reported operational fluoride level for Ann Arbor averaged 0.63 mg/L in 2025, calculated as the mean of 12 monthly values. The CDC’s monthly fluoride report records the values used for that annual figure.
| Measure or standard | Fluoride level |
|---|---|
| Ann Arbor: mean of 2025 monthly operational values | 0.63 mg/L |
| Ann Arbor: lowest reported 2025 monthly operational value | 0.19 mg/L |
| Ann Arbor: highest reported 2025 monthly operational value | 0.73 mg/L |
| US Public Health Service recommended level for community water fluoridation | 0.7 mg/L |
| EPA secondary standard | 2.0 mg/L |
| EPA maximum contaminant level | 4.0 mg/L |
The 2025 operational mean of 0.63 mg/L was below the recommended level of 0.7 mg/L and both EPA standards. The recommendation, secondary standard and maximum contaminant level serve different purposes; the EPA maximum contaminant level is an enforceable limit, while the secondary standard is not federally enforceable.
One of Ann Arbor’s 12 reported monthly operational values in 2025 was below 0.2 mg/L. As a result, the annual mean understates the level during months when fluoride was fed. The annual mean is not a measurement of the water at every individual tap or on every day of the year.
How does Ann Arbor compare with the county and Michigan?
In 2020, 97.6% of the Washtenaw County population served by public water systems received fluoridated water. Across Michigan, the corresponding figure was 89.3%. Both figures come from the CDC’s state and county fluoridation data.
These are population percentages for public water system customers, not the percentage of all households or private wells. The county figure describes a broader area than the Ann Arbor utility, so it should not be used as a substitute for checking which system supplies a particular address.
What does Michigan law say about fluoridation?
The available figures do not establish Michigan’s state law or policy on water fluoridation. Ann Arbor’s reported fluoridation status shows what the utility did; it does not, by itself, show whether state law requires that practice.
For a current answer about state requirements, ask the Michigan drinking-water authorities or the water utility. Keep the legal question separate from the measurement: a policy describes requirements, while a reported fluoride level describes a water system’s recorded operations.
How can you check your water or remove fluoride?
First, identify your water source. A water bill, property manager or local utility can help confirm whether your home is served by the Ann Arbor public water system or another supply. For a private well, the city system’s operational values do not tell you the fluoride level in your well.
To find out what is in water at your tap, ask an accredited drinking-water laboratory about a fluoride test. Follow the laboratory’s sampling instructions and check what the result represents. A tap result is specific to the sample collected; it may differ from a utility’s annual operational average. For more on choosing a test, see how to test water quality at home.
If you want to reduce fluoride, look for a treatment device with a specific, independently certified fluoride-reduction claim. Reverse osmosis and distillation are options; some other filters may also make a certified fluoride-reduction claim. A standard carbon filter or pitcher should not be assumed to remove fluoride unless its particular model is certified for that purpose.
Compare the model’s certification, where it treats water, and its filter or membrane replacement requirements before buying. Follow the manufacturer’s maintenance instructions, and consider testing treated water if you want to check the result. Our guide to the best pitcher water filters can help you compare pitcher options, but check each model’s fluoride claim separately.
When should you ask a dentist or doctor?
If you have questions or concerns about fluoride in your drinking water, ask a dentist or doctor for advice.
Where does the data come from?
The Ann Arbor fluoridation status and monthly operational values come from CDC’s My Water’s Fluoride reports for 2025, linked above. The annual level is the mean of the reported monthly values, rather than a separate measurement at a household tap.
The county and Michigan percentages come from the CDC’s 2020 community water fluoridation dataset. They provide regional context, while the US Public Health Service recommendation and EPA standards provide reference points for the Ann Arbor level.
Frequently asked questions
Does boiling Ann Arbor water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Is a fluoride result in mg/L the same as one in parts per million?
For drinking water, 1 mg/L is approximately equal to 1 part per million.