Is There Fluoride in Anchorage Water?
Yes, the utility adds fluoride; Anchorage’s reported 2025 level was about 0.64 mg/L.
Does Anchorage add fluoride to its water?
Anchorage’s municipal water system is reported as fluoridated, with a status of adjusted. That means the system adds fluoride; it is not a finding that fluoride is present only naturally.
The report identifies the system as MOA MUNICIPALITY OF ANCHORAGE, with public water system ID AK2210906. If you are comparing fluoride in tap water by city, check the system as well as the city name: a report for one public system does not establish the fluoride status of every water source in the area.
How much fluoride is in Anchorage water?
The state-reported operational fluoride level for Anchorage was 0.64 mg/L in 2025, calculated as the mean of 12 monthly values. The lowest reported monthly value was 0.61 mg/L and the highest was 0.67 mg/L that year. These are monthly report values, not individual tap measurements.
| Measure or standard | Fluoride level | What it represents |
|---|---|---|
| Anchorage reported mean, 2025 | 0.64 mg/L | Mean of 12 monthly operational values |
| Anchorage monthly range, 2025 | 0.61–0.67 mg/L | Lowest and highest reported monthly values |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable drinking water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking water limit |
Anchorage’s reported 2025 mean was below all three comparison levels. The 0.7 mg/L recommendation is a level for community water fluoridation, not the EPA maximum contaminant level. The secondary standard and maximum contaminant level are also different kinds of standards; the 2025 operational mean alone should not be treated as a determination of regulatory compliance.
The annual mean summarizes the reported monthly values. It does not tell you the exact fluoride concentration at a particular tap on a particular day.
What is the county and Alaska context?
Anchorage is a municipality in Alaska. A county-level percentage for people receiving fluoridated water is not available in the data cited here, so there is no local percentage to compare with the state figure.
For Alaska as a whole, 42.1% of the population served by public water systems received fluoridated water in 2020, according to CDC state-level data. That figure describes the public-water-system population, not necessarily every Alaska resident, and it should not be used as an estimate for Anchorage. It is also from a different year than the Anchorage system’s 2025 operational report.
What does Alaska law say about fluoridation?
The sources cited here do not establish whether Alaska has a statewide requirement or other state policy governing community water fluoridation. Anchorage’s reported adjusted status describes the municipal system; it does not by itself establish the legal requirements for other systems in Alaska.
For a question about a particular system’s current policy, identify its water supplier and ask the supplier directly. The supplier can also help you locate its current water quality report and confirm which system serves your address.
How can you check or remove fluoride from your water?
Start by confirming your water source. If your bill or water quality report identifies a public system, compare its name or ID with AK2210906. If your home uses a private well, the Anchorage municipal report does not tell you that well’s fluoride level.
For a tap-specific result, ask a qualified water-testing laboratory for a fluoride test and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach testing. When comparing a result with a report, check the units and the sampling date as well as the system name.
If you want to reduce fluoride, choose a device that specifically lists fluoride reduction in its certification or performance information. Reverse-osmosis systems and some filters can reduce fluoride, but a pitcher or other filter should not be assumed to do so simply because it filters water. The best pitcher water filters are worth comparing by their model-specific fluoride claims.
Follow the manufacturer’s installation and replacement instructions. To check what a device is doing at your home, ask a laboratory about testing both unfiltered water and water from the filter outlet; a reduction claim does not mean every device removes all fluoride.
If you have questions about fluoride in your water, ask a dentist or doctor.
Where does the Anchorage fluoride data come from?
The CDC fluoridation status report for 2025 identifies Anchorage’s municipal system as fluoridated and adjusted. The system ID is useful when checking that a report refers to the same supplier that serves your address.
The CDC monthly fluoride level report for 2025 is the source for the system’s 12 reported monthly values and the 2025 mean and range. These are operational reporting figures rather than a test of your individual tap.
The CDC state and county fluoridation dataset is the source for the 2020 Alaska public-water-system population percentage. Its statewide figure and the municipal system’s 2025 results describe different populations and periods.
Frequently asked questions
Does boiling Anchorage tap water remove fluoride?
No. Boiling does not remove fluoride, and water lost to evaporation can increase its concentration.
Is 0.64 mg/L the highest fluoride level reported for Anchorage in 2025?
No. It was the mean of 12 reported monthly values in 2025; the highest reported monthly value was 0.67 mg/L.