Is There Fluoride in Albuquerque Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, fluoride is present: Albuquerque’s utility reported an average of 0.46 mg/L in 2025, but whether the utility adds fluoride is not reported. For a broader comparison, see fluoride in tap water by city.

Does Albuquerque add fluoride to its water?

The Albuquerque Bernalillo County Water Utility Authority’s 2025 water quality report lists fluoride in its water and identifies erosion of natural deposits as a source. That identifies a natural source of fluoride, but it does not establish whether the utility also adds fluoride.

Fluoride can be present naturally in water without a utility adding it. The reported concentration alone cannot tell you whether a water system practices fluoridation. To confirm the utility’s current practice, ask the utility directly.

How much fluoride is in Albuquerque water?

The utility reported an average fluoride concentration of 0.46 mg/L in 2025. The table compares that reported average with three federal reference levels; the levels serve different purposes.

MeasureFluoride levelBasis
Albuquerque utility report0.46 mg/L2025 reported average
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable federal limit

Albuquerque’s 2025 reported average is below all three reference levels. The 0.7 mg/L recommendation is for community water fluoridation; it is not the same kind of standard as EPA’s maximum contaminant level.

The utility’s average is a useful starting point, not a measurement from every tap. If you need to know the concentration at a particular address, check which water system serves it and consider testing a sample from that tap.

What do Bernalillo County and New Mexico data show?

Albuquerque is primarily in Bernalillo County, but a county name alone does not identify the water supplier for every address. Check a water bill, ask the property owner or contact the local utility to find out which system serves you.

For New Mexico as a whole, the CDC’s community water fluoridation data show that 76.8% of the population served by public water systems received fluoridated water in 2020. That is a statewide coverage percentage, not a fluoride concentration, and it does not establish whether Albuquerque’s utility adds fluoride.

A Bernalillo County percentage is not available for this comparison. The New Mexico figure also covers people served by public water systems, rather than necessarily every resident, including those who use private wells.

Does New Mexico require water fluoridation?

The sources cited here do not establish a statewide New Mexico requirement or prohibition on adding fluoride. The statewide coverage percentage should not be read as a rule that applies to every water system.

For current requirements or local decisions affecting a particular address, contact the water supplier or the New Mexico drinking water program. Ask separately about the water’s measured fluoride concentration and whether the system adds fluoride: those are different questions.

How can you check your water or reduce fluoride?

Start by identifying your water source. If you receive a utility bill, use the supplier’s name to find its latest water quality report and look for the fluoride entry. If you use a private well, the Albuquerque utility’s reported average does not describe your well water.

For an independent result at your tap, use a laboratory that tests drinking water for fluoride. Ask for its sampling instructions and request the result in mg/L. Our guide to how to test water quality at home explains how to approach sampling and results.

If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction. Reverse osmosis systems, distillation units and some filters using activated alumina can reduce fluoride, but performance depends on the specific product and its maintenance. Follow the manufacturer’s instructions for installation and replacement.

Do not assume that every pitcher or carbon filter reduces fluoride. When comparing the best pitcher water filters, check the certification and fluoride-reduction claim for the exact model. If you want to verify a device’s performance at home, a laboratory can test samples taken before and after treatment.

When should you ask a professional?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the fluoride data come from?

The Albuquerque concentration comes from the utility’s 2025 water quality report, which identifies the figure as an average. The statewide coverage figure comes from CDC’s 2020 water fluoridation data. They describe different things: one is a reported concentration in a utility report, while the other is the share of a state population served by public systems receiving fluoridated water.

Both figures are tied to their reporting years. For a current local answer, check the latest utility report and ask the supplier about its present practice; a historical concentration or statewide percentage cannot establish whether fluoride is added today.

Frequently asked questions

Does boiling water remove fluoride?

No. Boiling does not reliably remove fluoride and can concentrate it as water evaporates.

Does an ordinary carbon filter remove fluoride?

Ordinary activated-carbon filters are not generally designed to reduce fluoride. Check the specific product’s independent certification for a fluoride-reduction claim.

Is mg/L the same as ppm in a water report?

For dilute water samples, 1 mg/L is approximately equal to 1 part per million, or ppm.