Is There Fluoride in Alaska Water?
Partly: 42.1% of people on Alaska community water systems received fluoridated water in 2020. That statewide figure does not tell you how much fluoride is in your own water or whether your utility adds it.
For comparisons with other communities, see fluoride in tap water by city.
How much of Alaska’s water is fluoridated?
In 2020, 42.1% of people served by Alaska community water systems received fluoridated water, according to CDC reporting. The percentage describes people served, not the share of water systems, the volume of water, or the entire population of Alaska.
It is also a snapshot from 2020, not a current result for every community. A statewide percentage cannot establish whether a particular home receives fluoridated water, and it does not give a fluoride concentration in milligrams per liter (mg/L).
Fluoride can occur naturally in water. Finding fluoride in a sample does not, by itself, establish that a water system adds it; ask the water provider if you want to know whether it practices fluoridation.
Does Alaska require water fluoridation?
The statewide percentage does not establish whether Alaska has a fluoridation mandate or what policy applies to an individual water system. A system’s reported fluoride concentration and a state’s legal requirements are separate pieces of information.
To check the current policy, ask the relevant Alaska state agency or your water provider what rules apply to your system. For a local answer, also ask the provider whether it adds fluoride, since the presence of naturally occurring fluoride is not the same as fluoridation.
The 2020 statewide figure should not be used to infer a current policy or a particular utility’s status. Those questions require information about the applicable rules and the system serving your address.
How can you find out about your city or water utility?
Start by identifying your water provider on your water bill or by asking your landlord or local government. Then request its latest annual drinking water quality report, sometimes called a consumer confidence report. Look for fluoride in the list of monitored substances and check the units, sampling year and notes accompanying the result.
Reports may present results as a range, an average or a particular sample, so read the description before comparing a number with a standard. If the report does not make the basis clear, ask the utility when and where the water was sampled and whether fluoride is added.
A provider’s report describes its system; it is not necessarily a measurement from your own tap. If you use a private well or want a tap-specific result, ask a certified laboratory about a fluoride test and follow its sample-collection instructions. Our guide explains how to test water quality at home.
If you are considering a filter, check whether the specific model is certified to reduce fluoride and follow its maintenance instructions. Not every pitcher filter is designed for that purpose; see our guide to the best pitcher water filters.
What do the fluoride levels mean?
These three numbers serve different purposes. They are reference points, not measurements of Alaska’s water.
| Level | What it represents |
|---|---|
| 0.7 mg/L | The US Public Health Service’s recommended level for community water fluoridation. |
| 2.0 mg/L | The EPA secondary standard for fluoride, which is federal guidance rather than a federally enforceable limit. |
| 4.0 mg/L | The EPA maximum contaminant level, an enforceable federal limit for regulated public water systems. |
The recommended fluoridation level is not the same as either EPA standard. When reading a local report, compare like units and check the sampling period and basis; a single tap result does not by itself establish whether a public water system complies with a limit.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Alaska data come from?
The statewide percentage comes from the CDC’s community water fluoridation data, using its Water Fluoridation Reporting System. The Alaska figure is for 2020 and refers to the population served by water systems, rather than a statewide fluoride concentration.
The CDC data is useful for understanding the reach of fluoridated community water at that time. For a current decision about your own supply, use a recent utility report or a laboratory result, and check its date and sampling basis. The statewide percentage cannot substitute for either.
Frequently asked questions
Does boiling water remove fluoride?
No. Boiling is not a reliable way to remove fluoride, and evaporation can increase its concentration in the water left behind.
Is fluoride reported in mg/L the same as fluoride reported in ppm?
For fluoride dissolved in water, 1 mg/L is approximately equivalent to 1 part per million, or 1 ppm. Check the report’s units before comparing results.