Is There Fluoride in Akron Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the utility adds fluoride; the state-reported operational level averaged about 0.94 mg/L across monthly values in 2025.

Does Akron add fluoride to its water?

Akron’s public water system is reported as fluoridated, with an adjusted status. That means fluoride is added; it is not merely a report that fluoride occurs naturally in the water. The status does not establish whether the source water also contains some natural fluoride.

The CDC fluoridation status report identifies the system as AKRON CITY PWS, with the identifier OH7700011, and lists it as fluoridated and adjusted for 2025. For comparisons with other systems, see fluoride in tap water by city.

How much fluoride is in Akron water?

The CDC monthly fluoride report contains 12 monthly operational values for Akron’s public water system in 2025. Their mean was 0.94 mg/L; the lowest and highest reported monthly values were 0.89 mg/L and 0.99 mg/L, respectively.

Akron measurementReported levelBasis
Mean0.94 mg/LMean of 12 monthly operational values, 2025
Lowest monthly value0.89 mg/LReported monthly operational value, 2025
Highest monthly value0.99 mg/LReported monthly operational value, 2025

These figures describe reported system operations, not a test of every individual tap. An individual result can differ from the system’s reported mean.

National referenceFluoride levelWhat it is
US Public Health Service0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable limit for public water systems

Akron’s 2025 mean of monthly operational values was above the 0.7 mg/L recommendation and below both EPA reference levels. The annual mean alone does not establish regulatory compliance, which depends on the applicable monitoring and calculation rules.

How does Akron compare with its county and Ohio?

Akron is in Summit County, but a county-wide percentage of residents receiving fluoridated water is not available in the data used here. Akron’s system status should not be treated as a result for every water system or private well in the county.

Statewide, the CDC community water fluoridation dataset reports that 92.7% of Ohio’s population served by public water systems received fluoridated water in 2020. That percentage concerns the public-water-system population, not necessarily every Ohio resident.

What is Ohio’s law or policy on fluoridation?

The sources cited here do not establish an Ohio law or policy requiring or restricting fluoridation. Akron’s reported adjusted status identifies what the system reported; it does not explain the legal basis for that status.

The 0.7 mg/L US Public Health Service figure is a national recommendation, not evidence of a particular Ohio legal requirement. For current rules that apply to a specific supply, ask the water supplier or the relevant state authority.

How can you check your water or remove fluoride?

First, confirm which supplier serves your address. If you receive Akron public water, ask the utility for its latest water quality report and the fluoride results relevant to your service area. If you use a private well or another supplier, Akron’s system figures do not establish the fluoride level at your tap.

For an address-specific result, use a laboratory that offers a fluoride test and follow its sampling instructions. Ask for the result in mg/L so you can compare it with the reported system values and national reference levels. Our guide to how to test water quality at home explains the testing process.

If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction, and check that the certification covers the exact model and cartridge. Reverse osmosis, distillation and activated alumina are treatment methods that can reduce fluoride; an ordinary activated-carbon pitcher is not necessarily designed to do so. Our guide to the best pitcher water filters can help you compare pitcher options, but check each model’s fluoride certification before choosing one.

Who should you ask about fluoride?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Akron data come from?

The system status and operational readings come from two CDC My Water’s Fluoride reports for Ohio: the 2025 fluoridation status report and the 2025 average fluoride levels by month report. The latter supplies the monthly values used for the mean and range above.

The Ohio percentage comes from the CDC’s state and county community water fluoridation dataset and refers to 2020. The national comparison values are the US Public Health Service recommendation and EPA’s drinking water standards; they serve different purposes and should not be treated as interchangeable limits.

Frequently asked questions

Does boiling Akron water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Can I tell how much fluoride is in Akron water by looking at it?

No. You cannot reliably determine the fluoride concentration by looking at or tasting the water; a fluoride-specific test is needed.