Is Tap Water Safe to Drink in Wyoming?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: EPA records show that 1.8% of people served by Wyoming community water systems were on systems with a health-based violation in the last three years, and the Cheyenne Board of Public Utilities had no violations recorded in that period.

What does the Wyoming tap water verdict mean?

The statewide record is reassuring for most people on community water systems, but it is not a guarantee for every address. Wyoming has many separate water systems, and their records differ; a utility’s record also cannot establish the condition of a home’s plumbing.

A health-based violation means a system violated a maximum contaminant level or a required treatment technique. A monitoring or reporting violation instead means a required test or report was missed or late; it does not, by itself, establish that the water was contaminated.

For a broader comparison, see tap water safety by state. For a decision about your own water, check your utility’s current notices and annual water quality report.

How many Wyoming water systems had health-based violations?

EPA records retrieved on November 3, 2026, cover 327 Wyoming community water systems serving a reported 545,237 people. Of those systems, 20 had a health-based violation during the preceding three-year period. They served 9,711 people, or 1.8% of the population served by the community systems in the record.

Most systems with violations were small. EPA also identified seven systems as serious violators and reported lead action-level exceedances at 13 systems in the three-year period. These are different measures: a serious-violator designation or lead action-level exceedance should not automatically be counted as a health-based violation.

What is the EPA record for Wyoming’s largest water systems?

The table shows the reported populations and three-year EPA records for the largest systems listed. Select a system name to open its EPA detailed facility report. The record is a snapshot, so ask the utility for current notices and its latest annual report.

Water systemPeople servedEPA record in the three-year period
Cheyenne Board of Public Utilities64,165No violations recorded.
Casper, City of59,000No violations recorded.
Laramie, City of32,395No violations recorded.
Gillette, City of32,222One quarter with a chlorine monitoring or reporting violation; no health-based violation flagged.
Jackson, Town of24,760Serious violator; monitoring, reporting and other violations recorded, with no health-based violation flagged.
Rock Springs, City of24,000No violations recorded.
Sheridan, City of22,700No violations recorded.
Evanston, City of11,727No violations recorded.

Gillette’s monitoring or reporting entry does not, by itself, mean its chlorine level was unsafe. Jackson’s record shows violations in 12 quarters and lists five rules violated during the three-year period. Its current violation entry concerns the Consumer Confidence Rule, which governs annual drinking-water quality reports.

Jackson’s record also reports one copper action-level exceedance in the three-year period. Residents should consult the utility’s notices and annual report for current details; the table does not show the result for any individual home.

Who should be careful about lead and household plumbing?

A utility can have a clean EPA violation record while lead enters water from pipes or fixtures serving an individual building. EPA’s lead action level is 15 parts per billion (ppb), or 0.015 milligrams per liter (mg/L); its health goal for lead is zero. An action-level exceedance is based on system sampling and does not mean every tap has the same result.

Babies, young children and pregnant people are especially vulnerable to lead exposure. If you suspect lead in your water, use bottled water or a filter certified to remove lead for drinking, cooking and infant formula while you seek advice from your utility or health department. Boiling does not remove lead.

Ask a healthcare professional about possible exposure, particularly for a child or during pregnancy; they can advise whether testing is appropriate. For help choosing a device, see our guide to the best pitcher water filters and check that any model is certified for the contaminant you need to reduce.

How can you check your own utility and tap?

  1. Find your water supplier. Look at your water bill or ask your landlord or building manager. Your town and your water supplier may not have the same name.
  2. Read the latest information. Ask the supplier for its annual water quality report and any current drinking-water notices. Follow the instructions in a notice that applies to your address.
  3. Check the details. Look for the system’s name and identification number, sampling results, violations and the dates the information covers. Distinguish a missed test or report from a health-based violation.
  4. Consider a tap test. A utility report does not replace testing for conditions in your own plumbing. See how to test water quality at home and ask your health department or an accredited laboratory about appropriate sampling.

If you use a private well, the community-system figures above do not describe your water. Contact your local health department for guidance on testing the well and interpreting its results.

Where does the Wyoming water data come from?

The figures come from EPA’s Enforcement and Compliance History Online, or ECHO, using Safe Drinking Water Act data from the Safe Drinking Water Information System. The records were retrieved on November 3, 2026; the system names in the table link to their individual EPA reports.

The three-year history describes reported compliance, not a continuous test of every tap. The current quarter can also be marked undetermined, and later updates may change a record. Your utility’s current notices and latest annual report are the best starting points for local details.

Frequently asked questions

Does clear water mean it has no lead?

No. You cannot reliably determine whether water contains lead by looking at it; a tap-water test can check for it.

Does an annual water quality report include results for every home?

No. The report describes the water system’s results and compliance information, not a separate test of every household tap.

Are private wells included in the statewide community-system figure?

No. The figure describes people served by community water systems, not households using private wells.