Is Tap Water Safe to Drink in Washington?
Yes, for most residents, because 0.1% of people served by Washington community water systems were served by a system with a health-based violation in the last 3 years; Seattle Public Utilities, for example, had no health-based violation recorded in that period.
That statewide figure is reassuring, but it cannot guarantee the water at every tap. Your utility’s record, current notices and household plumbing matter too. See tap water safety by state for records elsewhere.
What does the safety verdict mean?
The verdict reflects EPA records for community water systems, not a test of every home. A health-based violation means a system exceeded a maximum contaminant level or violated a required treatment technique. The figure describes violations recorded over the last 3 years, not necessarily current conditions.
Some violations concern monitoring or reporting: a system may have missed or submitted tests or paperwork late. Those violations do not, by themselves, establish that the water was contaminated. Other violation categories need their own explanation in the utility’s record; they should not automatically be treated as either health-based or paperwork violations.
How many Washington systems had health-based violations?
EPA’s record lists 2,373 Washington community water systems serving a reported 9,607,930 people. Of those systems, 19 had a health-based violation in the last 3 years. They served 9,508 people, or 0.1% of the reported population served by community systems.
Most systems with health-based violations were small. The population figure is the total reported for community systems, not a count of everyone in Washington; the statewide record does not tell a private well owner about their well water.
EPA also identified 23 systems as serious violators and reported lead action-level exceedances at 31 systems over the same 3-year period. These are separate measures, not numbers to add to the 19 health-based violations. A statewide total alone does not identify the condition of any particular household’s water.
What do the largest water systems’ EPA records show?
The table links to each system’s EPA report. The records were retrieved on November 3, 2026. People served are the populations reported for each system.
| Water system | People served | EPA record for the last 3 years |
|---|---|---|
| Seattle Public Utilities | 1,161,961 | No violations recorded in the last 12 quarters |
| Tacoma Water Division City of | 446,245 | No violations recorded in the last 12 quarters |
| Vancouver City of | 373,047 | No violations recorded in the last 12 quarters |
| Spokane City of | 346,138 | No violations recorded in the last 12 quarters |
| Bellevue City of | 321,349 | No violations recorded in the last 12 quarters |
| Alderwood Water District | 245,715 | No violations recorded in the last 12 quarters |
| Everett Public Works Dept. City of | 215,774 | No violations recorded in the last 12 quarters |
| Kent Water Department | 166,421 | Violations in 2 of the last 12 quarters; no health-based violation recorded |
Kent Water Department’s record lists one rule violated and categorizes the issue as an “other violation.” The record does not specify the contaminant or rule in the data summarized here. Check the utility’s notices and annual water quality report for current details rather than assuming what caused it or whether it remains an issue.
Can household plumbing add lead to tap water?
Yes. A utility’s clean record covers its system; it does not establish that every home’s service line, pipes or fixtures are free of lead. Testing at your own tap is the way to investigate that household risk.
EPA’s lead health goal is zero. Its lead action level is 15 parts per billion (0.015 mg/L); the action level is used in evaluating system-wide sampling and is not a guarantee that an individual tap has no lead risk.
If lead is a concern, use a filter certified to reduce lead and follow its maintenance instructions, or use water from a source you know is safe for drinking and preparing infant formula. Not every pitcher removes lead; compare certifications when considering the best pitcher water filters. Boiling does not remove lead.
Who should be especially careful?
Children and pregnant people are especially vulnerable to lead exposure. If you suspect exposure, contact a clinician; a child’s clinician can discuss whether a blood lead test is appropriate. Follow your utility’s current drinking-water notices, including any instructions for vulnerable households.
How can you check your own utility and tap?
Start with the name on your water bill or ask your landlord which system serves the property. Compare that name with the EPA report, then look for the utility’s latest notices and annual water quality report. Those sources can give more current local detail than a historical statewide summary.
The annual report can help you review monitoring results and identify contaminants relevant to your system. For a household plumbing concern, contact the utility or local health department about testing and see how to test water quality at home. Ask what the test measures and how to collect the sample before taking it.
If you rely on a private well, the community-system figures do not assess your water. Contact your local health department for guidance on well testing and any local concerns.
Where does the Washington data come from?
These figures come from EPA’s Enforcement and Compliance History Online, or ECHO, using Safe Drinking Water Act information from the Safe Drinking Water Information System. The records were retrieved on November 3, 2026; the system reports in the table show the underlying EPA entries.
The 3-year record is useful for comparing reported compliance, but it is a snapshot rather than a real-time test of your faucet. For the latest information, check your utility’s notices and annual water quality report and contact the utility if you need help interpreting them.
Frequently asked questions
What does purchased surface water mean?
It means a system buys water from another supplier and the water’s recorded source is surface water. The source description alone does not establish whether water meets drinking-water standards.
What is a public water system ID?
A public water system ID, or PWSID, identifies a water system in regulatory records. Seattle Public Utilities’ PWSID is WA5377050.