Is Tap Water Safe to Drink in Washington DC?
Yes, the D.C. Water and Sewer Authority had no health-based drinking water violations in EPA’s record for the last 3 years.
That record describes the public water system, not the plumbing inside every home. For comparisons elsewhere, see tap water safety by state.
What does the EPA safety verdict mean?
EPA’s record lists no health-based violations for the D.C. Water and Sewer Authority during the last 3 years. It also lists no rules violated during that period. The current quarter is marked undetermined, so the record should not be read as a complete assessment of every moment up to today.
A clean utility record does not guarantee that water remains unchanged after it enters a building. Lead or other materials in a service line, household pipes or fixtures can affect water at an individual tap. Check the utility’s current notices for any instructions that apply to your address.
Who supplies Washington DC’s water?
The D.C. Water and Sewer Authority is the public water system in the EPA record. Its primary source is purchased surface water, and it is owned by local government.
The system’s EPA identification number is DC0000002. EPA lists the population served as 632,323 people; that figure describes the system’s service population rather than the condition of any particular building’s plumbing.
What does EPA’s 3-year violation record show?
The following summarizes the D.C. Water and Sewer Authority’s EPA record for the last 3 years. A health-based violation is different from a monitoring or reporting violation: the latter means a test or required paperwork was missed or late, not that contamination was established.
| System | People served | Health-based violations | Open violations | Lead action-level exceedances |
|---|---|---|---|---|
| D.C. Water and Sewer Authority | 632,323 | None reported | None listed | None reported |
EPA also lists zero quarters with violations among the last 12 quarters, although the current quarter is undetermined. No reported lead action-level exceedance does not rule out elevated lead at an individual tap.
What did PFAS testing find?
PFAS are a group of persistent chemicals sometimes called “forever chemicals.” EPA’s one-time UCMR 5 survey tested the D.C. Water and Sewer Authority’s water from January 17 through October 16, 2024.
| Chemical | UCMR 5 result | Reporting limit | EPA limit |
|---|---|---|---|
| PFOA | Not detected in 8 samples | 4.0 parts per trillion (ppt) | 4.0 ppt |
| PFOS | Not detected in 8 samples | 4.0 ppt | 4.0 ppt |
“Not detected” means a result was below the reporting limit; it does not prove the chemical was absent. EPA has set limits of 4.0 ppt for both PFOA and PFOS. Compliance is based on running annual averages, so these survey results alone are not a compliance determination.
Other PFAS results included 3 detections across 184 measurements, with a highest result of 4.7 ppt. That aggregate does not identify a particular chemical for comparison with the PFOA or PFOS limit. The results are from EPA’s UCMR 5 occurrence data.
Could household plumbing add lead?
Lead can enter drinking water from a building’s service line, plumbing or fixtures. EPA’s utility record cannot tell you whether a particular home has lead plumbing or what comes out of its taps.
Use cold tap water for drinking and cooking, and follow the utility’s guidance on running water before use if it has been sitting in the pipes. Boiling does not remove lead. A household water test can provide information specific to your tap.
Infants, children and pregnant people are especially vulnerable to lead exposure. If you suspect lead exposure, ask a clinician whether testing is appropriate, and use bottled water or a filter certified to reduce lead in the meantime. People with weakened immune systems or medical conditions that affect their water needs should ask their clinician about additional precautions.
Can you use tap water for ice, brushing teeth and washing produce?
The EPA record does not identify a system-wide health-based violation in the last 3 years, but it cannot verify the water at your individual tap. If the water at your tap is suitable for drinking and no current notice says otherwise, it can also be used to make ice, brush teeth and wash produce.
If a current utility advisory applies to your address, follow its specific instructions for each use. If lead in your plumbing is a concern, use water from a source you have verified or filtered for lead for these activities as appropriate.
How can you get extra protection?
A test from a certified laboratory can help you assess water at your own tap, particularly if you are concerned about lead. Learn how to test water quality at home, and follow the laboratory’s sampling instructions so the result answers the question you are asking.
A filter can provide another layer of protection, but not every filter removes every contaminant. Look for independent certification to reduce the specific contaminant of concern, such as lead or PFOA and PFOS, and follow the manufacturer’s replacement schedule. Our guide to the best pitcher water filters discusses filter options.
Where does this information come from?
The violation and system details come from the EPA ECHO drinking water report, retrieved on November 3, 2026. The PFAS results come from EPA’s UCMR 5 occurrence data file dated October 15, 2026.
These sources are snapshots, not a substitute for current local instructions. For the latest details and any active advisories, check the D.C. Water and Sewer Authority’s notices and annual water quality report.
Frequently asked questions
Does lead in water have a noticeable taste?
Lead cannot be reliably identified by the appearance, taste or smell of water. Testing is the way to check a particular tap.
What does ppt mean in the PFAS results?
Ppt means parts per trillion: one part of a substance per trillion parts. It is a way to express very small concentrations.