Is Tap Water Safe to Drink in Texas?
Yes, for most residents: EPA records show that 1.3% of people served by Texas community water systems were served by a system with a health-based violation in the past 3 years, while the City of Houston had no health-based violation flag.
What does the Texas tap water verdict mean?
The statewide figure is encouraging, but it does not establish the quality of water at every Texas tap. Your utility’s record, current notices and household plumbing all matter. For a broader comparison, see tap water safety by state.
A health-based violation in these statewide data means a system exceeded a contaminant limit or had a treatment-technique violation. It does not mean that every customer was exposed to a contaminant or became ill. Conversely, a system without a reported violation can have a problem that is not reflected in this snapshot.
How many Texas water systems had health-based violations?
EPA records retrieved on November 3, 2026, list 4,760 Texas community water systems, with a reported total population served of 33,238,927 people. Of those systems, 315 had a health-based violation during the previous 3 years. They served a reported 415,894 people, or approximately 1.3% of the total served.
Most systems with violations were small. The statewide record also identifies 282 systems as serious violators and 87 systems with a lead action-level exceedance in the 3-year period. These are different measures and should not be added together.
The population figures are reported system-service estimates, not a guarantee about conditions at individual addresses. People using private wells are not covered by these community-system totals.
What do records show for the largest Texas water systems?
The table summarizes the EPA record for the previous 3 years. None of these eight systems had a health-based violation flag or was listed as a serious violator in the retrieved data.
| System | People served | EPA record for the previous 3 years |
|---|---|---|
| City of Houston | 2,970,543 | One quarter with a treatment-technique violation; no health-based violation flag |
| San Antonio Water System | 2,643,729 | No violations reported in the last 12 quarters |
| Dallas Water Utility | 1,356,479 | No violations reported in the last 12 quarters |
| City of Austin Water & Wastewater | 1,115,323 | No violations reported in the last 12 quarters |
| City of Fort Worth | 955,900 | Three quarters with a reporting violation |
| El Paso Water Utilities | 747,168 | One quarter with a chlorite monitoring and reporting violation |
| City of Arlington | 413,955 | No violations reported in the last 12 quarters |
| City of Corpus Christi | 317,247 | No violations reported in the last 12 quarters |
Houston’s recorded violation concerned the Interim Enhanced Surface Water Treatment Rule. Although the statewide definition of health-based violations includes treatment-technique violations, Houston’s separate health-based flag was “No.” Consult the utility’s notices and annual water quality report for details rather than drawing conclusions from the summary alone.
Fort Worth’s reporting violation concerns paperwork, not proof of contaminated water. El Paso’s monitoring and reporting violation concerns testing or reporting requirements for chlorite; it does not establish that chlorite contaminated the water. Current conditions may differ from this historical snapshot.
Can household plumbing add lead to Texas tap water?
Yes. Lead can enter water from service lines, household plumbing or fixtures, so a clean utility record does not rule out lead at an individual tap. The statewide record of 87 systems with lead action-level exceedances also does not establish the lead level in every home they serve.
EPA’s lead action level is 15 parts per billion (0.015 mg/L); its health goal is zero. The action level is a system-level measure, not a declaration that water from a particular tap is risk-free below that level.
If lead is a concern, ask your utility about the service line and arrange a test of your tap water. Use cold water for drinking, cooking and infant formula, and follow the utility’s advice about flushing. Boiling does not remove lead. A filter certified to reduce lead can help when installed and maintained as directed; see our guide to the best pitcher water filters.
Who should be careful: Children and pregnant people are especially vulnerable to lead exposure. If you suspect exposure, speak with a doctor about whether testing is appropriate. During any local drinking-water advisory, follow the utility’s current instructions; seek prompt medical advice if someone becomes ill after a suspected exposure.
How can you check your own Texas water utility?
Start with the utility named on your water bill, then look for its latest notices and annual water quality report. The report describes the utility’s testing results; current notices are important because an annual report and a historical EPA record may not reflect today’s conditions.
Use the EPA report links in the table if your provider is listed. For another provider, ask the utility for its public water system identification number and its current water quality information. If you use a private well, you are responsible for checking its water rather than relying on a community-system record.
For sampling and interpreting household results, read how to test water quality at home. Choose a test suited to the concern—such as lead from plumbing—and follow the laboratory’s sampling instructions.
Where do the Texas water-quality data come from?
These figures come from EPA’s Enforcement and Compliance History Online (ECHO), using Safe Drinking Water Act data from the Safe Drinking Water Information System. The statewide and utility records were retrieved on November 3, 2026.
The utility summaries show reported violations over the preceding 3 years and a quarterly compliance history. A quarter marked undetermined, usually the current quarter, is not the same as a confirmed violation or a clean result. Check the linked EPA records and your utility’s latest notices for current details.
Frequently asked questions
Can you tell whether tap water contains lead by tasting it?
No. Lead in drinking water cannot reliably be seen, tasted or smelled; testing is the way to check a particular tap.
Are private wells included in the Texas community water system totals?
No. The statewide figures describe community water systems, not individual private wells.
What does an undetermined quarter mean in an EPA record?
It means the record does not give a determined compliance status for that quarter, usually the current one. It should not be read as either a confirmed violation or a clean result.