Is Tap Water Safe to Drink in Tennessee?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: EPA records show that 0.2% of people served by Tennessee community water systems were served by a system with a health-based violation in the last 3 years, and Metro Water Services had no such violation.

Is Tennessee tap water safe to drink?

The statewide figure is encouraging, but it does not establish the condition of every utility’s water or every household tap. Check your own utility’s current notices and annual water quality report before drawing a conclusion about your supply.

For a broader comparison, see tap water safety by state. The Tennessee figures below are from EPA records retrieved on November 3, 2026.

What does the statewide record show?

Tennessee’s EPA record includes 445 community water systems serving a reported total of 7,927,701 people. Four systems, serving 12,135 people, had health-based violations during the 3-year period. That is 0.2% of the reported population served.

A health-based violation means a system exceeded a maximum contaminant level or violated a required treatment technique. The record separately identifies 12 serious violators; it does not establish how many overlap with the four systems with health-based violations.

One system reported a lead action-level exceedance during the 3-year period. These community-system figures do not describe water from private wells.

What do the largest Tennessee water systems’ records show?

The table summarizes the listed systems’ EPA records for the last 12 quarters, or roughly 3 years. Each system name links to its EPA detailed facility report.

SystemPeople servedEPA record
Metro Water Services789,969No health-based violation flagged; monitoring and reporting violations in 1 quarter
Memphis Light, Gas, & Water659,500No violations in the 12 quarters
Knoxville Utilities Board - KUB254,671No violations in the 12 quarters
Clarksville Water Department251,864No violations in the 12 quarters
Consolidated U.d. of Rutherford CO221,871No violations in the 12 quarters
Tennessee American Water207,046No violations in the 12 quarters
White House Utility District130,411No violations in the 12 quarters
First U.d. of Knox County115,531Other violation in all 12 quarters; no health-based violation flagged

Metro Water Services’ monitoring and reporting violations involved chlorine and the Revised Total Coliform Rule. Monitoring and reporting violations mean missed or late tests or paperwork; they do not, by themselves, mean the water was contaminated.

For First U.d. of Knox County, the record lists an other violation of the Interim Enhanced Surface Water Treatment Rule and identifies that rule as being in current violation. Consult the utility’s notices and annual report for current details rather than assuming what the violation means for your tap.

Can lead enter Tennessee tap water from household plumbing?

A utility’s record does not rule out lead from a home’s service line, pipes or fixtures. Testing water at the tap is the way to learn about that particular outlet; see how to test water quality at home.

EPA’s lead health goal is zero. Its current lead action level is 15 parts per billion (ppb), or 0.015 milligrams per liter (mg/L), in system sampling; an individual home’s result alone does not determine whether the system exceeds that action level. EPA’s 2024 rule lowers the action level to 10 ppb, with compliance from 2037.

If lead is a concern, choose a filter certified to reduce lead and follow its maintenance instructions. Our guide to the best pitcher water filters explains what to consider. Boiling water does not remove lead and can concentrate it.

Who should take extra care?

Young children and pregnant people are especially vulnerable to lead exposure. If you are concerned about possible exposure, contact a health care professional about appropriate testing; this is particularly important for a child or during pregnancy.

People with weakened immune systems should ask their health care professional about precautions relevant to their situation. Everyone should follow their utility’s current drinking-water notices, including any instructions about water for drinking or preparing infant formula.

How can you check your own Tennessee utility?

Find your water provider on your bill or ask your landlord or property manager. Request its latest annual water quality report and check its current notices; a statewide average cannot tell you whether a local notice applies to your address.

Compare the utility name and public water system ID with its EPA record. The annual report and any current notices can give context that a summary table cannot, while a home tap test can address concerns about household plumbing.

If you use a private well, the community water system figures above do not apply to it. Ask your local health department about appropriate well-water testing.

Where does the Tennessee data come from?

The figures come from EPA ECHO’s Safe Drinking Water Act data, drawn from the Safe Drinking Water Information System. They were retrieved on November 3, 2026; the linked facility reports may change as records are updated.

The listed compliance histories also include an undetermined quarter. An undetermined entry is not a confirmed violation or a confirmation of compliance, and EPA’s record is not a substitute for a utility’s current notice.

Frequently asked questions

Can taste or smell tell me whether Tennessee tap water meets standards?

No. Taste and smell alone cannot establish whether water meets drinking-water standards. Check your utility’s report and notices, and consider testing your tap when you have a specific concern.

What is a public water system ID?

It is an identifier used to distinguish a water system in EPA records. Matching the ID as well as the utility name helps you find the record for your provider.