Is Tap Water Safe to Drink in Tacoma?
Yes, Tacoma Water Division City of had no health-based violations in the EPA record for the last 3 years. For comparisons elsewhere, see our guide to tap water safety by state.
What does the Tacoma tap water verdict mean?
The EPA record reports no health-based violations for Tacoma Water Division City of during the last 3 years. It also lists no quarters with violations among the last 12 quarters.
That record describes the public water system, not the condition of plumbing in every home. It is also a snapshot, not a substitute for checking the utility’s current notices and annual water quality report.
Who supplies Tacoma’s water, and where does it come from?
Tacoma Water Division City of is a local-government-owned public water system. Its primary source is surface water, according to the EPA record.
The system serves 446,245 people, a figure for the utility’s service area rather than Tacoma’s city population alone. The record does not identify a specific source water body, so check the utility’s annual report for more detail about its water supply.
What does the EPA violation record show for the last 3 years?
| Public water system | People served | Health-based violations | Open violations | Lead action-level exceedances |
|---|---|---|---|---|
| Tacoma Water Division City of | 446,245 | None reported | None reported | None reported |
The record lists no rules violated during the period. Health-based violations concern drinking water requirements intended to protect health; a monitoring or reporting violation instead means a missed or late test or paperwork, not proof that the water is contaminated. Neither type is listed in this record.
No reported lead action-level exceedance is encouraging at the system level, but it does not establish the lead level at an individual tap.
What did PFAS testing find?
PFAS are a group of long-lasting chemicals often called “forever chemicals.” In EPA’s one-time national UCMR 5 survey, Tacoma Water Division City of samples were collected from January 28 through October 8, 2025. The results below are from the EPA UCMR 5 occurrence data.
| PFAS | Samples with detections | Highest detected result | Reporting limit |
|---|---|---|---|
| PFOA | 0 of 8 | Not detected | 4.0 ppt |
| PFOS | 0 of 8 | Not detected | 4.0 ppt |
| PFHxS | 4 of 8 | 5.1 ppt | 3.0 ppt |
| PFBS | 1 of 8 | 3.3 ppt | 3.0 ppt |
| PFNA | 0 of 8 | Not detected | 4.0 ppt |
| HFPO-DA, also called GenX | 0 of 8 | Not detected | 5.0 ppt |
EPA has set limits of 4.0 parts per trillion (ppt) each for PFOA and PFOS. Neither was detected in these samples at the 4.0 ppt reporting limit. A result below the reporting limit is not the same as zero, and these survey results alone do not establish current compliance, which is based on running annual averages.
PFHxS and PFBS were detected. Their results should not be compared with the PFOA and PFOS limits as if they were the same chemical.
What about lead in household plumbing?
Lead can enter water from plumbing or fixtures after it leaves the utility’s system. EPA’s lead health goal is zero, and its current action level is 15 parts per billion (ppb); the action level is not a guarantee that every individual tap is lead-free.
Use cold tap water for drinking and cooking, and follow the utility’s guidance on flushing water that has stood in plumbing. A test of your own tap is the way to learn about lead at that tap.
Can you use the water for ice, brushing teeth and washing produce?
The EPA record does not list a health-based violation for the system, but it cannot rule out a household plumbing issue or a newer local advisory. For ice, brushing teeth and washing produce, check current utility notices and follow any instructions that apply to your address.
If an advisory is in effect, follow its specific directions rather than assuming that boiling or filtering is enough. Boiling does not remove lead or PFAS and can concentrate them as water evaporates.
What if you want extra protection?
Start by checking the utility’s notices and annual report, then consider testing your tap for contaminants of concern. Our guide explains how to test water quality at home, including how to choose a test.
For a filter, look for independent certification to reduce the specific contaminant you want to address. Not every filter removes lead or every PFAS; check the model’s certified claims and replace cartridges as directed. Our review of the best pitcher water filters can help you compare options.
Pregnant people, families with infants or young children, and people with health conditions who are concerned about their water should discuss their circumstances with a clinician. If you suspect lead exposure, ask a clinician or local health department about appropriate testing and next steps.
Where does this information come from?
The system and violation information comes from the EPA ECHO drinking water report for Tacoma Water Division City of, public water system ID WA5386800. The record was retrieved on November 3, 2026.
The PFAS results come from EPA’s UCMR 5 occurrence data file dated October 15, 2026. For the latest local details, including any advisories, consult the utility’s notices and annual water quality report.
Frequently asked questions
Is Tacoma Water Division City of privately owned?
No. The EPA record identifies it as a local-government-owned water system.
Does the EPA record say whether Tacoma’s water is fluoridated?
The record summarized here does not specify whether fluoride is added. Check the utility’s annual water quality report for that information.