Is Tap Water Safe to Drink in St. Paul?
Generally yes, but check for lead: Saint Paul Regional Water Services had no health-based violations in the last three years, but lead exceeded the action level in some homes.
What does the safety verdict mean?
The EPA record supports a generally favorable verdict for Saint Paul Regional Water Services’ water, with an important qualification: a home’s service line, pipes and fixtures can affect the water at its tap. The utility-wide record cannot tell you whether your own tap contains lead.
Check the utility’s current notices and annual water quality report for updates. For a broader comparison, see tap water safety by state.
Who supplies St. Paul’s water, and where does it come from?
Saint Paul Regional Water Services is the local-government-owned public water system listed in the EPA record. Its primary source is surface water; the record does not identify a specific lake or river.
The system serves an estimated 392,529 people. That is the population served by the water system, not a count limited to St. Paul residents.
What does the EPA violation record show?
The following table summarizes the EPA record for Saint Paul Regional Water Services, public water system ID MN1620026. The three-year record does not establish conditions at every household tap.
| Measure | EPA record |
|---|---|
| People served | 392,529 |
| Health-based violations in the last 3 years | None reported |
| Open violations | Number not specified in the available record |
| Lead action-level exceedances in the last 3 years | 1 reported |
The record lists violations in five of the last 12 quarters and identifies one rule with violations. The listed categories are monitoring and reporting, and other violations; the record does not specify the rule or contaminant involved.
Monitoring and reporting violations concern missed or late tests or paperwork, not proof that water was contaminated. The available record does not explain the other violation category or give a count of currently open violations, so check utility notices and the annual report for current details.
What did PFAS testing find?
PFAS are a group of persistent chemicals sometimes called “forever chemicals.” EPA’s UCMR 5 was a one-time national monitoring survey conducted from 2023 to 2025; the results for Saint Paul Regional Water Services cover samples collected from September 2023 through September 2024.
| Chemical | Utility survey result | EPA limit |
|---|---|---|
| PFOA | Not detected in 4 samples; reporting limit 4.0 parts per trillion (ppt) | 4.0 ppt |
| PFOS | Not detected in 4 samples; reporting limit 4.0 ppt | 4.0 ppt |
“Not detected” means a result was below the reporting limit, not necessarily that the chemical was absent. Both reporting limits were 4.0 ppt, the same numerical value as EPA’s respective limits for PFOA and PFOS. The survey results are a snapshot, not a current household measurement or a compliance determination; compliance is based on running annual averages.
The summary also reports 6 detections across 92 samples for other PFAS, with a maximum of 20.2 ppt. It does not identify the individual chemicals behind those detections, so that maximum should not be compared with the PFOA or PFOS limits as though it were a result for either chemical.
How can household plumbing affect lead levels?
Lead can enter drinking water from a service line, plumbing or fixtures. EPA’s lead action level is 15 parts per billion (ppb), or 0.015 milligrams per liter (mg/L); its health goal for lead is zero. An action-level exceedance in the system record does not mean every home has a lead result above that level.
Use cold tap water for drinking and cooking, and follow local guidance on running water after it has been sitting in the plumbing. Boiling does not remove lead and can concentrate it. A test of your own tap is the way to check household exposure.
Children, pregnant people and households preparing infant formula should be especially careful about potential lead exposure. If you are concerned about exposure, ask a healthcare professional about appropriate testing; do not wait for symptoms. If a tap test shows elevated lead, use a verified safer water source or a filter certified for lead reduction while seeking guidance from the utility or local health department.
Is tap water suitable for ice, brushing teeth and washing produce?
The EPA record does not indicate a general need to avoid St. Paul tap water for these uses, but it cannot rule out lead from a particular home’s plumbing. Use water you would drink when making ice.
If your tap has elevated lead or there is a current water advisory, follow the utility’s specific instructions. A verified safer source or appropriately filtered water can be used for ice, brushing teeth and washing produce while you resolve concerns about your tap.
What if you want extra protection?
Start by asking the utility or a qualified laboratory how to collect a household lead sample. Our guide to how to test water quality at home explains the testing process. A utility report is useful context, but it is not a substitute for a test from your own tap.
If you choose a filter, look for independent certification for the specific contaminant you want to reduce, and follow its installation and cartridge-replacement instructions. For lead, check the product’s certification for lead reduction; for PFAS, check whether it specifically covers PFOA and PFOS. Our guide to the best pitcher water filters can help you compare options.
Where does the information come from?
The violation and system details come from the EPA ECHO drinking water facility report, retrieved November 3, 2026. The PFAS results come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026.
These records describe reported utility data and past sampling. For current conditions, consult Saint Paul Regional Water Services’ notices and annual water quality report.
Frequently asked questions
Does clear-looking water mean it contains no lead?
No. Lead cannot be reliably identified by the water’s appearance, taste or smell. Testing is needed to check your tap.
Can a renter test the water in their home?
Yes. A renter can ask the utility or a qualified laboratory about testing and sampling instructions. The landlord may also be able to provide information about the building’s plumbing.
Is a lead test the same as a PFAS test?
No. Ask the laboratory which contaminants its test measures and whether it can analyze the specific PFAS you are concerned about.