Is Tap Water Safe to Drink in St. Louis?
Yes, ST Louis City PWS had no health-based violations in the last 3 years, although it had monitoring and reporting violations. Those violations concern missed or late tests or paperwork; they are not proof that the water was contaminated.
What does the St. Louis tap water verdict mean?
The EPA record supports a “yes” for water supplied by ST Louis City PWS, based on the absence of health-based violations in the last 3 years. It does not guarantee that every home’s water is free of contaminants: household plumbing and fixtures can affect water after it leaves the utility’s system.
The record is a snapshot, not a substitute for current notices. For a broader comparison, see tap water safety by state.
Who supplies St. Louis water, and where does it come from?
The main system in the EPA record is ST Louis City PWS, a local-government-owned utility that uses surface water. Its public water system identification number is MO6010715.
EPA lists the system as serving 304,709 people. That figure describes the system’s service population, not necessarily the population within city boundaries. If you are unsure whether it supplies your address, check your water bill or ask your water provider.
What does the EPA violation record show?
The table summarizes the EPA record retrieved on November 3, 2026. The violation and lead figures cover the preceding 3 years.
| Measure | ST Louis City PWS |
|---|---|
| People served | 304,709 |
| Health-based violations | None reported |
| Open or current violations | Lead and Copper Rule listed as current; the record does not state a count |
| Lead action-level exceedances | None reported |
The system had violations in 4 of the last 12 quarters. Its listed violation categories are monitoring and reporting, and reporting violations; the Lead and Copper Rule is the rule identified in the violation record.
These categories indicate missed or late testing or reporting requirements, not a finding that a contaminant exceeded a health standard. The record does not explain the specific circumstances. Check the utility’s current notices and annual water quality report for details.
What did PFAS testing find?
PFAS are a group of chemicals often called “forever chemicals.” EPA’s fifth Unregulated Contaminant Monitoring Rule survey, or UCMR 5, collected drinking-water occurrence data nationally during 2023–2025. It was a survey, not continuous monitoring.
For ST Louis City PWS, samples were collected from March 7 through December 12, 2024. PFOA and PFOS were not detected in any of their 8 samples each. The reporting limit for each was 4.0 parts per trillion (ppt), the same numerical level as the limit EPA has set for each chemical.
A result below the reporting limit is not the same as zero. Because there was no reportable detection, the results do not establish an exact maximum below that level. EPA compliance is based on running annual averages, so the survey results alone do not determine compliance.
Other PFAS results also showed no detections, including results for PFBS, PFNA, PFHxS and HFPO-DA, also known as GenX. The findings come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026. They do not establish current concentrations at an individual tap.
Could lead come from household plumbing?
Yes. A utility-level record does not rule out lead exposure from a particular home’s service line, plumbing or fixtures. EPA’s current lead action level is 15 parts per billion (ppb), while its health goal for lead is zero. An action-level record for a system is not a test result for your individual tap.
Use cold tap water for drinking, cooking and preparing infant formula; heat it afterward if needed. Boiling does not remove lead. If you know or suspect that your water contains lead, use bottled water or a filter certified to reduce lead while you arrange testing.
Pregnant people and families with young children should be especially attentive to possible lead exposure. If you are concerned about exposure, contact a healthcare professional; a child’s clinician can advise whether blood lead testing is appropriate.
Can you use the water for ice, brushing teeth and washing produce?
Under normal conditions, water from ST Louis City PWS can generally be used for these tasks. Ice retains whatever is in the water used to make it, so use an appropriate drinking-water source if you have concerns about your home’s plumbing.
If the utility issues a boil-water or other water-use notice, follow its specific instructions for drinking, making ice, brushing teeth and preparing food. A notice may apply to a particular area rather than the entire system.
What if you want extra protection?
Start by identifying the concern. A test for lead at your own tap can help assess exposure from your plumbing; other tests may be appropriate if you have a different concern. See how to test water quality at home for an overview.
If you choose a filter, check that the specific model is independently certified to reduce the contaminant you want to address, such as lead or a named PFAS. Follow the manufacturer’s installation and replacement instructions. Not every filter removes every contaminant, and boiling does not remove PFAS.
For pitcher options, see the best pitcher water filters. If a notice advises using bottled water or another source, follow that notice rather than assuming a filter is sufficient.
Where does the data come from?
The violation summary comes from the EPA ECHO facility report for ST Louis City PWS, using Safe Drinking Water Act data. The record was retrieved on November 3, 2026; records can change after that date.
The PFAS findings come from EPA’s separate UCMR 5 occurrence data. For the latest local information, check ST Louis City PWS notices and its annual water quality report, and confirm that the notice or report applies to your address.
Frequently asked questions
Can you tell whether tap water contains lead by its taste?
No. Lead cannot be reliably identified by the taste, smell or appearance of water; testing is needed to assess your tap.
What does a part per trillion mean?
A part per trillion, abbreviated ppt, describes one part of a substance per trillion parts. It is used to express very small concentrations in water.
Does a clear glass of water prove it is contaminant-free?
No. Some contaminants cannot be seen, smelled or tasted, so clear water is not a substitute for testing.