Is Tap Water Safe to Drink in Shreveport?

DetoxWater Editorial Team•Published November 5, 2026

Mostly yes, with caveats: the verdict for the City of Shreveport Water System reports health-based violations in the last three years, but none open now.

That summary conflicts with a separate health-based violation flag in the EPA record, which says “No.” Check the utility’s current notices and annual water quality report for details, and see our guide to tap water safety by state for a broader comparison.

What does the safety verdict mean?

The verdict summarizes the available record, not a guarantee that every tap in Shreveport is free of contaminants. The reported disagreement between the verdict and the detailed health-based violation flag cannot be resolved from this snapshot alone.

The verdict says no health-based violations are open now, and the current-violation field lists no contaminants or rules. Check current utility notices before relying on this snapshot, especially if a boil-water or other drinking-water advisory is in effect.

Who supplies Shreveport’s water, and where does it come from?

The City of Shreveport Water System is a locally owned public water system that uses surface water. EPA lists its public water system ID as LA1017031 and its population served as 192,378.

The population served is the system’s estimate, not a count of people inside Shreveport’s city limits. If another system supplies your address, its record may differ; check your bill or ask your provider.

What does the EPA violation record show?

The EPA snapshot covers the last three years, or 12 quarters, for the City of Shreveport Water System.

Record itemShreveport result
People served192,378
Health-based violation flagNo; this conflicts with the verdict’s summary of past health-based violations
Open violationsNone open according to the verdict; the current-violation field lists none
Lead action-level exceedancesNone reported
Quarters with violations11 of the last 12
Rules or contaminants listed in violationsSurface Water Treatment Rule; Interim Enhanced Surface Water Treatment Rule; total trihalomethanes, a disinfection byproduct

The record lists maximum contaminant level, treatment technique, and monitoring and reporting violation categories. A monitoring or reporting violation means a required test or report was missed or late; it does not by itself mean the water was contaminated. The snapshot does not establish which category applied to each listed rule or contaminant.

“None reported” for lead action-level exceedances does not mean every home has been tested. Ask the utility for its notices and annual report for current details and clarification of the conflicting health-based violation information.

What did PFAS testing find?

EPA’s UCMR 5 program tested for PFAS, sometimes called “forever chemicals,” in a one-time national survey. For the Shreveport Water System, the listed sampling period ran from June 13, 2023, to March 31, 2025. Results are in parts per trillion (ppt).

PFASResultsReporting limit
PFOANot detected in 4 samples4.0 ppt
PFOSNot detected in 4 samples4.0 ppt
PFBSNot detected in 4 samples3.0 ppt
PFHxSNot detected in 4 samples3.0 ppt
PFNANot detected in 4 samples4.0 ppt
HFPO-DA, also called GenXNot detected in 4 samples5.0 ppt

EPA has set limits of 4.0 ppt each for PFOA and PFOS. Their reporting limits in this survey were also 4.0 ppt; “not detected” means below the reporting limit, not necessarily zero. Regulatory compliance is based on running annual averages, so these individual survey results do not establish ongoing compliance.

In a separate group labeled “any other PFAS,” 3 of 92 samples had detections, with a highest reported level of 7.5 ppt. The summary does not identify those other PFAS, so that result should not be compared directly with the PFOA or PFOS limits.

Could household plumbing add lead?

Yes. Even when a utility’s record shows no reported lead action-level exceedances, lead can enter water through a home’s service line, plumbing or fixtures. The system-wide record cannot tell you the lead level at your own tap.

EPA’s current lead action level is 15 parts per billion (ppb), and its health goal is zero. If you are pregnant, preparing infant formula, or concerned about a young child’s possible lead exposure, ask a health professional about testing and precautions. Do not use hot tap water for drinking or preparing formula, and do not rely on boiling to remove lead.

Can you use the water for ice, brushing teeth and washing produce?

The EPA snapshot does not establish a current citywide restriction on these uses. Check the utility’s current notices: if an advisory applies to your address, follow its instructions for drinking, making ice, brushing teeth and washing produce.

During a boil-water advisory, use water prepared according to the notice, or bottled water, for those purposes. Boiling addresses certain germs but does not remove lead or PFAS.

How can you get extra protection?

For a concern about your particular tap, use a qualified laboratory to test for the contaminant of interest. Our guide to how to test water quality at home explains how to approach sampling; ask the utility about available lead testing information as well.

If you choose a filter, look for a model independently certified to reduce the specific contaminant you are concerned about. NSF/ANSI 53 or 58 certifications can cover certain contaminants, but check the product’s actual certification for lead, PFOA or PFOS rather than assuming every filter removes them. Compare options in our guide to the best pitcher water filters, and replace cartridges as directed.

People with weakened immune systems should ask a health professional whether they need additional precautions. If you suspect exposure or have health concerns, contact a clinician; do not wait for a filter to answer a medical concern.

Where does the information come from?

The system record comes from the EPA ECHO detailed facility report, retrieved November 3, 2026. PFAS results come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026.

These are snapshots, not live checks of your tap. For current information, consult the City of Shreveport Water System’s notices and annual water quality report.

Frequently asked questions

Is bottled water required throughout Shreveport?

The EPA snapshot alone does not establish a citywide need for bottled water. Follow any current utility notice for your address and seek advice if a household test identifies a concern.

Does the Shreveport system’s EPA record cover private wells?

No. The record describes the City of Shreveport Water System, not private wells or other water systems.

Can clear water still contain lead or PFAS?

Yes. Appearance alone cannot establish whether water contains lead or PFAS; testing is needed to check for them.