Is Tap Water Safe to Drink in Santa Ana?
Yes, the City of Santa Ana had no health-based drinking water violations in the last 3 years, according to EPA records.
What does the EPA verdict mean?
The verdict describes the City of Santa Ana’s water system, not a guarantee that every home’s tap water is free of contaminants. EPA’s record shows no health-based violations in the last 3 years, while separate testing found some PFAS in the system’s water.
A home’s plumbing can also affect water after it leaves the utility’s system. For a broader comparison, see tap water safety by state.
Who supplies Santa Ana’s water, and where does it come from?
The City of Santa Ana operates the water system identified in EPA records as CITY OF SANTA ANA. Its public water system ID is CA3010038, and EPA lists its primary source as purchased surface water.
The system is owned by local government and serves an estimated 316,184 people. Ask the utility for its latest annual water quality report and any current notices for details about the water it supplies.
What does EPA’s last 3 years of violation data show?
| EPA record for City of Santa Ana | Result |
|---|---|
| People served | 316,184 people |
| Health-based violations in the last 3 years | None reported |
| Open violations | None reported |
| Lead action-level exceedances in the last 3 years | None reported |
EPA lists zero quarters with violations among the last 12 quarters. A quarter marked undetermined has not been assigned a final violation status in the record.
The absence of a reported lead action-level exceedance is a system-level result; it does not measure lead at every household faucet. Similarly, the record does not establish the concentration of every contaminant at your tap today.
What did PFAS testing find?
PFAS are a group of long-lasting chemicals often called “forever chemicals.” EPA has set drinking water limits of 4.0 parts per trillion (ppt) each for PFOA and PFOS, two chemicals in the group.
EPA describes its fifth Unregulated Contaminant Monitoring Rule, or UCMR 5, as a national survey for 2023–2025. The Santa Ana results in EPA’s occurrence data are dated March 14, 2023, through April 27, 2026.
| Chemical | Samples with detections | Maximum detected | EPA limit |
|---|---|---|---|
| PFOA | 8 of 28 samples | 8.9 ppt | 4.0 ppt |
| PFOS | 7 of 28 samples | 14.2 ppt | 4.0 ppt |
The maximum reported result for each chemical was above its respective limit. That comparison alone does not establish a violation: compliance is based on running annual averages, not the highest individual result. Contact the utility for current results and notices.
The survey also detected PFHxS in 9 of 28 samples, with a maximum of 8.4 ppt. GenX, PFBS and PFNA were not detected at their respective reporting limits; “not detected” does not necessarily mean zero.
Could household plumbing add lead?
Yes. Lead can enter water from a home’s service line, fixtures or other plumbing, even when the utility has no reported lead action-level exceedance. EPA’s lead health goal is 0 parts per billion (ppb); its system action level is 15 ppb, not a guarantee about an individual faucet.
Use cold tap water for drinking and cooking, and run the cold tap before use if water has stood in the plumbing. Ask the utility for guidance on your service line and request a laboratory test if you want to know the lead level at your faucet. Boiling water does not remove lead or PFAS.
Who should be careful, and when should they see a doctor?
Pregnant people and families with infants or young children should discuss suspected lead exposure with a health care professional; ask whether blood lead testing is appropriate. If you have concerns about PFAS exposure or water used for infant formula, ask your clinician for advice and check the utility’s current notices.
Can you use tap water for ice, brushing teeth and washing produce?
Use the same cold water you would choose for drinking, unless a current utility or public health notice advises otherwise. If you filter drinking water because of concerns about your household plumbing or PFAS, you can also use that filtered water for ice, brushing teeth and rinsing produce.
The EPA record does not measure conditions at each home. If you are unsure about your tap, check current notices and consider testing it.
How can you get extra protection?
A test from a state-certified drinking water laboratory can measure selected contaminants at your faucet. Follow the laboratory’s sampling instructions, and choose tests for the substances you are concerned about; see how to test water quality at home.
For filtration, look for independent certification that specifically lists reduction of the contaminant you want to address, such as lead, PFOA or PFOS. Depending on the device, relevant certifications can include NSF/ANSI 53 or 58; a general filter certification does not mean a product removes every contaminant. Follow the manufacturer’s replacement schedule, and compare options in our guide to the best pitcher water filters.
Where does this information come from?
The violation and system information comes from EPA’s Safe Drinking Water Act records in the City of Santa Ana facility report, retrieved November 3, 2026. PFAS results come from EPA’s UCMR 5 occurrence data, with a file date of October 15, 2026.
These records are a snapshot, not a substitute for current local notices. Contact the City of Santa Ana for its latest annual water quality report and updates.
Frequently asked questions
Can you tell whether Santa Ana tap water contains lead by looking at it?
No. Water can look clear and still contain lead. A laboratory test can measure lead at your faucet.
Does a refrigerator filter remove PFOA and PFOS?
It depends on the specific filter. Check its independent certification and product information for claims covering PFOA and PFOS, and replace it as directed.