Is Tap Water Safe to Drink in Salt Lake City?
Yes, the Salt Lake City Water System had no health-based drinking-water violations in the last 3 years.
What does that verdict mean?
The EPA record indicates no reported health-based violations for the Salt Lake City Water System over that period. It does not guarantee the quality of water at every household tap: plumbing within a home can affect water after it leaves the utility’s system.
The record also does not mean every contaminant was absent. PFAS survey results, including one PFOS measurement above EPA’s limit, need to be read separately from the violation record. For a broader comparison, see tap water safety by state.
Who supplies Salt Lake City’s water, and where does it come from?
The Salt Lake City Water System is a local-government-owned utility whose primary source is surface water. EPA records list approximately 383,612 people served by the system; that figure describes the utility’s service population, not just Salt Lake City residents.
Check your water bill or contact the utility if you are unsure which system serves your address. The findings below apply to the Salt Lake City Water System and may not describe another supplier.
What does EPA’s 3-year violation record show?
| Measure | Salt Lake City Water System |
|---|---|
| People served | 383,612 |
| Health-based violations in the last 3 years | None reported |
| Open violations | None listed |
| Lead action-level exceedances in the last 3 years | None reported |
The record lists zero quarters with violations among the last 12 quarters. Its compliance history also includes an undetermined quarter, a designation usually used for the current quarter.
A monitoring or reporting violation would mean a required test or report was missed or late; it would not by itself establish that the water was contaminated. For current details, consult the utility’s notices and annual water quality report.
What did PFAS testing find?
PFAS are a group of persistent chemicals often called “forever chemicals.” The Salt Lake City Water System was sampled from October 2, 2023, through October 9, 2024, for EPA’s UCMR 5 national occurrence survey. Results are measured in parts per trillion (ppt).
| Chemical or group | Results with detections | Highest result |
|---|---|---|
| PFOA | 0 of 52 | Not detected |
| PFOS | 1 of 52 | 7.1 ppt |
| PFHxS | 1 of 52 | 18.2 ppt |
| PFNA | 0 of 52 | Not detected |
| PFBS | 0 of 52 | Not detected |
| HFPO-DA (GenX) | 0 of 52 | Not detected |
| Other PFAS, combined | 2 of 1,196 results | 6.2 ppt |
EPA has set limits of 4.0 ppt each for PFOA and PFOS. The highest PFOS result, 7.1 ppt, was above that limit, but a single survey result does not establish a violation: compliance is based on running annual averages. The PFHxS result concerns a different chemical and should not be compared with the PFOA or PFOS limit.
For PFOA and PFOS, the reporting limit was 4.0 ppt. “Not detected” means a result was below the applicable reporting limit, not necessarily zero. These are survey results, not a measurement of your tap today; the utility’s annual report and notices are the place to check for current information.
Can lead get into water from household plumbing?
Yes. A system-wide record with no reported lead action-level exceedances does not rule out lead from a particular home’s pipes, fixtures or connections. Testing water from your own tap is the way to find out about that location; ask the utility or a qualified laboratory about sampling instructions.
Use cold tap water for drinking, cooking and preparing infant formula. Ask the utility for advice on flushing your plumbing before collecting water. Boiling does not remove lead or PFAS.
Who should be careful, and when should they see a doctor?
Children and pregnant people should be especially careful about possible lead exposure. If you suspect exposure, contact a clinician and ask whether a blood lead test is appropriate. If you have questions about PFAS exposure or an individual health condition, discuss them with a clinician or local health department.
What about ice, brushing teeth and washing produce?
The EPA public-system record applies to the same supply used for drinking, making ice, brushing teeth and washing produce. It cannot establish what is present after water passes through an individual home’s plumbing.
Follow any current utility notice that applies to your address. If a notice recommends an alternative water source, check its instructions for these uses; boiling is not a remedy for lead or PFAS.
How can you add protection?
Start by checking the utility’s current notices and annual report, then consider a tap test for the contaminants you are concerned about. Our guide explains how to test water quality at home, including why sampling instructions matter.
A filter is optional, but choose one independently certified to reduce the specific contaminant you want to address. Look for a lead reduction claim or a PFOA/PFOS reduction claim, as applicable, and follow the manufacturer’s replacement schedule. Certification for taste or chlorine alone does not establish lead or PFAS reduction; compare options in our guide to the best pitcher water filters.
Where does this information come from?
The violation and system information comes from the EPA facility report for the Salt Lake City Water System, retrieved November 3, 2026. The system’s public water system ID is UTAH18026.
The PFAS results come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026. Both sources describe recorded results and should be read alongside the utility’s current notices and annual water quality report.
Frequently asked questions
Is the Salt Lake City Water System privately owned?
No. EPA records identify it as a local-government-owned water system.
Does a nondetect result mean there is no PFOA in the water?
Not necessarily. It means the result was below the test’s reporting limit; the PFOA reporting limit in this survey was 4.0 ppt.