Is Tap Water Safe to Drink in Rochester?

DetoxWater Editorial Team•Published November 5, 2026

Mostly yes, but an EPA violation is open: Rochester City has an open treatment-technique violation, meaning a required treatment or lead-control step was not met; it does not by itself mean a contaminant limit is being exceeded.

MCWA, which serves parts of Rochester, has the same type of open violation in the EPA record. For a broader comparison, see tap water safety by state.

What does the verdict mean for Rochester tap water?

The EPA record flags both Rochester City and MCWA for a treatment-technique violation under the Lead and Copper Rule. A treatment-technique violation means a required step was not met; it is not, on its own, a measurement showing that a contaminant limit was exceeded.

The record also cannot establish what is in water at an individual tap. Check your supplier’s current notices and annual water quality report for details about the violation and any instructions for customers.

Who supplies Rochester’s water, and where does it come from?

Rochester City is the main water system, and MCWA also serves parts of the city. EPA lists surface water as the primary source for both systems.

The systems’ reported service populations extend beyond the question of which utility serves a particular Rochester address. To identify your supplier, check your water bill or ask your landlord or building manager. You can also contact Rochester City or MCWA directly.

What does the EPA violation record show for the last three years?

The EPA record retrieved on November 3, 2026, shows a health-based violation flag for each system. Both have an open Lead and Copper Rule treatment-technique violation.

SystemPeople servedHealth-based violation in last 3 yearsOpen violationLead action-level exceedances in last 3 years
Rochester City210,000YesLead and Copper Rule treatment techniqueNone reported
MCWA525,262YesLead and Copper Rule treatment techniqueNone reported

Each system had violations in 6 of the last 12 quarters. Neither was listed as a serious violator. “None reported” for lead action-level exceedances does not mean every individual home was tested or that every tap is free of lead.

What did PFAS testing find in Rochester’s water?

EPA’s UCMR 5 survey tested for PFAS, sometimes called “forever chemicals,” during 2023–2025. Rochester City’s samples were collected from February to November 2023; MCWA’s were collected from November 2023 to August 2024.

SystemPFOA resultsPFOS resultsReporting limit for each
Rochester CityNot detected in 8 samplesNot detected in 8 samples4.0 parts per trillion
MCWANot detected in 18 samplesNot detected in 18 samples4.0 parts per trillion

EPA has set limits of 4.0 parts per trillion for both PFOA and PFOS. Neither was detected at the reporting limit in these samples, so there was no detected maximum to compare with those limits. “Not detected” does not mean zero, and regulatory compliance is based on running annual averages rather than a single survey result.

Other tested PFAS, including PFHxS, PFNA, PFBS and GenX, were also not detected in the reported samples. These results describe the survey, not every possible future sample or every household tap.

What about lead and household plumbing?

Lead can enter drinking water from a home’s service line, plumbing or fixtures. A system-wide record does not rule out lead at an individual tap, so household testing is useful if you are concerned.

EPA’s lead action level for water-system sampling is 15 parts per billion; its health goal for lead is zero. The action level is not a guarantee that every individual tap is below that concentration.

Use cold tap water for drinking, cooking and preparing infant formula. If you are concerned about lead, use bottled water or water from a filter certified to reduce lead while you arrange testing. Boiling water does not remove lead.

Who should be careful, and when should they see a doctor?

Infants, young children and pregnant people are particularly vulnerable to lead exposure. If you suspect exposure, speak with a healthcare professional about whether blood lead testing is appropriate; lead exposure may have no obvious symptoms.

Can you use Rochester tap water for ice, brushing teeth and washing produce?

For ordinary use, cold tap water can be used for ice, brushing teeth and rinsing produce, subject to your utility’s current instructions and any household lead concerns. If you use a filter because of a lead concern, consider the water used for these purposes as well as the water you drink.

Follow any current notice from your supplier. A boil-water instruction addresses a different concern from lead: boiling does not remove lead.

How can you get extra protection?

For a household check, ask a certified laboratory about collecting a tap sample and interpreting the result. Our guide to how to test water quality at home explains what to consider before choosing a test.

If you choose a filter, check that the specific model is certified to reduce the contaminant you are concerned about. Not every pitcher filter reduces lead or PFAS; for lead, look for a model certified for lead reduction and follow its installation and cartridge-replacement instructions. Compare options in our guide to the best pitcher water filters.

Where does the data come from?

The violation information comes from EPA’s Safe Drinking Water Act records, retrieved on November 3, 2026. See the detailed EPA reports for Rochester City and MCWA.

PFAS results come from EPA’s UCMR 5 occurrence data, using a file dated October 15, 2026. For current details and customer instructions, check your supplier’s notices and annual water quality report.

Frequently asked questions

Does clear or good-tasting water mean it contains no lead?

No. Lead cannot reliably be identified by the water’s appearance, taste or smell; a tap test is needed to check for it.

Does every refrigerator filter remove lead?

No. Check whether the specific filter model is certified for lead reduction and replace it according to the manufacturer’s instructions.

How does a part per trillion compare with a part per billion?

One part per billion equals 1,000 parts per trillion.