Is Tap Water Safe to Drink in Philadelphia?
Yes, the Philadelphia Water Department had no health-based violations in the last 3 years, although it had monitoring and reporting violations, which concern missed or late tests or paperwork and are not proof of unsafe water.
What does the verdict mean for Philadelphia tap water?
The EPA record does not list a health-based violation for the Philadelphia Water Department during the last 3 years. It does list monitoring and reporting violations, which are different from a finding that a contaminant exceeded a health standard.
This verdict describes the utility’s record, not the condition of pipes inside an individual home. Check the utility’s current notices and annual water quality report for the latest local information. For a broader comparison, see our guide to tap water safety by state.
Who supplies Philadelphia’s tap water?
The Philadelphia Water Department is a local-government utility that uses surface water as its primary source. The EPA record lists approximately 1.6 million people served by the system.
These findings apply to the Philadelphia Water Department’s system. If your property receives water from another system or a private well, check the information for that source instead.
What does the EPA violation record show?
The record covers the last 3 years and identifies one rule with violations: the Interim Enhanced Surface Water Treatment Rule. The listed violation category is monitoring and reporting; the record does not identify a contaminant as the cause of those violations.
| EPA record item | Philadelphia Water Department |
|---|---|
| People served | Approximately 1.6 million |
| Health-based violations in the last 3 years | None listed |
| Open violations | No current violations listed |
| Lead action-level exceedances in the last 3 years | None reported |
| Quarters with violations out of the last 12 | 3 |
A monitoring or reporting violation can involve a missed or late test or paperwork. The record does not establish from that category alone whether water was contaminated, or whether any particular home has lead in its plumbing.
What did EPA testing find for PFAS?
PFAS, sometimes called “forever chemicals,” are a group of chemicals monitored in drinking water. EPA’s fifth Unregulated Contaminant Monitoring Rule, or UCMR 5, was a national survey conducted from 2023 through 2025. The Philadelphia Water Department’s listed samples were collected from January 8 through October 7, 2024.
| Chemical | Samples with a detection | Highest result | EPA limit |
|---|---|---|---|
| PFOA | 8 of 12 | 8.1 parts per trillion | 4.0 parts per trillion |
| PFOS | 6 of 12 | 6.0 parts per trillion | 4.0 parts per trillion |
The highest detected results for both PFOA and PFOS were above their respective limits. However, a maximum sample result alone does not establish a violation: compliance is based on running annual averages. EPA has set limits for PFOA and PFOS, and parts of the rule and its deadlines have since been revised.
The survey also detected other PFAS. A result below a test’s reporting limit is recorded as not detected; it does not necessarily mean the chemical is absent. See the EPA UCMR 5 occurrence data for the national survey source.
Can household plumbing add lead to tap water?
Yes. Lead can enter water from plumbing or fixtures, so a utility-wide record cannot determine the lead level at your particular tap. The EPA record reports no lead action-level exceedances for the system in the last 3 years, but that does not guarantee that every home’s water is free of lead.
EPA’s lead action level is 15 parts per billion; its health goal for lead is zero. An action level is a system-level regulatory threshold, not a guarantee that an individual tap below that level has no risk.
Use cold tap water for drinking, cooking and preparing infant formula. Boiling water does not remove lead. If you suspect lead plumbing, consider testing your tap water and ask the utility about the service line.
If you are pregnant or caring for an infant or child, discuss suspected lead exposure and appropriate testing with a clinician. People with weakened immune systems should also ask their clinician whether they need additional water precautions.
Can you use Philadelphia tap water for ice, brushing and produce?
In the absence of a specific notice affecting your address, tap water is generally used for making ice, brushing teeth and washing produce. Use cold water for ice and rinse produce under running water.
Freezing does not remove lead from water. If the utility issues a boil-water or do-not-drink notice, follow its specific instructions for drinking, ice, brushing and food preparation; do not assume boiling addresses every contaminant.
How can you get extra protection?
A home water test can help identify a problem at your own tap that a utility-wide record cannot resolve. Choose a test for the contaminant you are concerned about, such as lead, and follow the sampling instructions carefully. Our guide explains how to test water quality at home.
If you choose a filter, look for independent certification for the specific contaminant you want to reduce, such as lead, PFOA or PFOS. Check the product’s certification and replacement schedule: not every filter removes the same substances. Our review of the best pitcher water filters explains what to consider when comparing options.
Where does the information come from?
The violation information comes from EPA ECHO Safe Drinking Water Act data for the Philadelphia Water Department, public water system ID PA1510001. The record was retrieved on November 3, 2026; you can review the EPA detailed facility report.
PFAS results come from EPA’s UCMR 5 occurrence data file dated October 15, 2026. For current conditions and any instructions for your address, consult the Philadelphia Water Department’s notices and annual water quality report.
Frequently asked questions
What does UCMR stand for?
UCMR stands for Unregulated Contaminant Monitoring Rule. UCMR 5 was an EPA national drinking-water survey conducted from 2023 through 2025.
What is one part per trillion in drinking water?
For these drinking-water measurements, 1 part per trillion is approximately 1 nanogram per liter.
What does a PFAS reporting limit mean?
It is the level at which a laboratory can report a result under the test method. A result reported as not detected is below that limit, not necessarily zero.