Is Tap Water Safe to Drink in Omaha?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Metropolitan Utilities District had no health-based drinking water violations in EPA’s record for the last 3 years.

What does Omaha’s tap water safety record mean?

EPA’s record is reassuring about the water system, but it does not guarantee the condition of the pipes and fixtures in every home. It also does not replace current notices from the Metropolitan Utilities District.

For context beyond Omaha, see our guide to tap water safety by state. If you have a concern about your household water, check the utility’s notices and consider testing your tap.

Who supplies Omaha’s water, and where does it come from?

The Metropolitan Utilities District is the main water utility in the EPA record for Omaha. It is a local government-owned system that serves approximately 660,000 people and uses surface water as its primary source.

The population served by the utility is larger than Omaha’s city population; the EPA figure describes the water system, not just city residents. For current source and treatment details, consult the utility’s annual water quality report.

What violations did EPA report in the last 3 years?

The EPA record shows no health-based violations for the Metropolitan Utilities District in the last 3 years. It also reports no quarters with violations among the last 12 quarters; the current quarter is marked undetermined.

Water systemPeople servedHealth-based violationsOpen violationsLead action-level exceedances
Metropolitan Utilities District, NE3105507660,000None reportedNone reportedNone reported

An undetermined quarter means its status is not yet established in this record. For the latest information, check the utility’s notices and annual water quality report rather than assuming the historical record describes every current condition.

What did PFAS testing find in Omaha’s water?

EPA’s fifth Unregulated Contaminant Monitoring Rule survey, known as UCMR 5, tested for PFAS, often called “forever chemicals.” For the Metropolitan Utilities District, the reported sampling period ran from November 4, 2024, to August 4, 2025.

PFASSamples with detectionsReporting limit
PFOA0 of 104.0 ppt
PFOS0 of 104.0 ppt
PFNA0 of 104.0 ppt
PFHxS0 of 103.0 ppt
PFBS0 of 103.0 ppt
HFPO-DA (GenX)0 of 105.0 ppt

The dataset also reports no detections among 230 other PFAS sample results. A reporting limit for that combined group was not listed.

EPA has set limits of 4.0 parts per trillion (ppt) for PFOA and PFOS. Neither was detected in these samples at the 4.0 ppt reporting limit, so there is no detected maximum to compare with those limits. Not detected does not mean zero, and these survey results alone do not establish regulatory compliance, which is based on running annual averages. The results come from EPA’s UCMR 5 occurrence data.

Could lead come from household plumbing?

Yes. The utility’s record does not rule out lead entering water from a service line, plumbing or fixtures serving an individual home. No lead action-level exceedances were reported for the system in the last 3 years, but that system-level result is not a test of your kitchen tap.

EPA’s lead action level is 15 parts per billion (ppb), while its health goal for lead in drinking water is zero. The action level is not a safe threshold for an individual household sample. If you are unsure about your plumbing, ask the utility or property owner about the service line and arrange a lead test at your tap.

Children and pregnant people are especially vulnerable to lead exposure. If you suspect exposure, particularly when preparing infant formula, use bottled water or water from a filter certified for lead reduction and contact a healthcare professional or your child’s doctor for advice. Boiling water does not remove lead.

Can you use Omaha tap water for ice, brushing teeth and washing produce?

The EPA record does not identify a utility violation that calls for avoiding tap water for these uses. It does not rule out a current advisory or a problem in your home’s plumbing, so check the Metropolitan Utilities District’s notices if you are concerned.

If you suspect lead in your household water, use bottled water or appropriately filtered water for drinking, making ice and preparing food while you investigate. Follow any current utility notice for the uses it addresses.

How can you get extra protection?

A test of your own tap can help identify household plumbing concerns that a utility-wide record cannot resolve. Ask the utility or a laboratory about sampling for lead and any other contaminant you are concerned about; our guide explains how to test water quality at home.

If you choose a filter, look for independent certification for the specific contaminant you want to reduce. Lead and PFAS claims are not interchangeable, and a filter designed only for taste or odor may not address either. Follow the manufacturer’s replacement instructions; compare options in our guide to the best pitcher water filters.

Where does this information come from?

The violation and system details come from the EPA ECHO report for the Metropolitan Utilities District, retrieved November 3, 2026. PFAS results come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026.

These sources describe a historical utility record and a national testing survey. For current conditions and any instructions for customers, consult the Metropolitan Utilities District’s notices and annual water quality report.

Frequently asked questions

Does the utility’s EPA record cover a private well in Omaha?

No. The record describes the Metropolitan Utilities District’s public water system, not an individually owned private well.

What is Omaha’s public water system ID?

The Metropolitan Utilities District’s public water system ID in the EPA record is NE3105507.

What does ppt mean in the PFAS results?

Ppt means parts per trillion, a unit used to express very small concentrations. In water, 1 ppt is approximately 1 nanogram per liter.