Is Tap Water Safe to Drink in New York?
Check your utility: EPA records show that 50.9% of people served by New York community water systems were served by systems, including New York City System, with a health-based violation in the past 3 years.
That statewide figure does not establish what is in your glass today. Start with the system serving your address, and see our guide to tap water safety by state for comparisons elsewhere.
What does the New York tap water verdict mean?
New York has many community water systems, and their EPA records differ. A health-based violation means a system was reported to have exceeded a contaminant limit or violated a required treatment technique; it does not by itself show that every person served was exposed or became ill.
New York City System’s record lists a treatment technique violation under the Long Term 2 Enhanced Surface Water Treatment Rule. EPA listed that rule as being in current violation when the data was retrieved. Check the utility’s current notices and annual water quality report for details and any instructions to customers.
How many New York systems have health-based violations?
EPA records retrieved on November 3, 2026, covered 2,253 community water systems serving approximately 18,308,998 people in New York. The figures below describe the reported records, not individual household test results.
| Statewide measure | EPA record |
|---|---|
| Systems with a health-based violation in the past 3 years | 53 |
| People served by those systems | 9,327,141 |
| Share of people served by community systems | 50.9% |
| Systems flagged as serious violators | 18 |
| Systems with a reported lead action-level exceedance in the past 3 years | 91 |
Most systems with violations are small, but a large system can affect the population total substantially. New York City System alone serves approximately 8,271,000 people, so its record is important to the statewide percentage.
What do EPA records show for the largest systems?
The table summarizes the largest systems in the record. The violation counts refer to the past 12 quarters, or roughly 3 years; the linked EPA reports provide system-specific details.
| System | People served | EPA record |
|---|---|---|
| New York City System | 8,271,000 | Health-based treatment technique violation in 12 quarters; the surface water treatment rule was listed in current violation. |
| Suffolk County Water Authority | 1,100,000 | No violations recorded in the 12 quarters. |
| MCWA | 525,262 | Health-based treatment technique violation in 6 quarters; the Lead and Copper Rule was listed in current violation. |
| OCWA | 350,000 | No violations recorded in the 12 quarters. |
| ECWA Direct | 313,380 | No violations recorded in the 12 quarters. |
| Buffalo Water Authority | 276,000 | Monitoring and reporting violations in 5 quarters; no health-based violation flag. |
| Veolia Water New York | 270,000 | No violations recorded in the 12 quarters. |
| Liberty Utilities New York - Lynbrook | 220,000 | Lead and Copper Rule treatment technique violation in 10 quarters, including one marked serious; no rule was listed in current violation and no health-based flag was recorded. |
Monitoring and reporting violations concern missed or late tests or paperwork; they do not themselves establish that water was contaminated. A treatment technique violation is different, but the record alone does not specify the conditions at an individual tap. The current quarter was undetermined in these system histories.
Can lead enter water from household plumbing?
Yes. Lead can enter drinking water from a service line or plumbing, so a system’s clean EPA record does not guarantee that every home’s tap water is free of lead. Ask your utility about its service-line information and consider testing your own tap; our guide explains how to test water quality at home.
EPA’s lead health goal is zero. Its current lead action level is 15 parts per billion (ppb), or 0.015 mg/L; this is a system-level trigger based on tap sampling, not a safe threshold for an individual glass. EPA has set a lower action level of 10 ppb, with compliance from 2037.
Use cold tap water for drinking, cooking and infant formula. Boiling does not remove lead. A filter certified for lead reduction can be an option if used and maintained as directed; compare the best pitcher water filters and check the certification for the contaminant you want to reduce.
Who should be especially careful?
Pregnant people, infants and young children should be especially careful about possible lead exposure. If you suspect exposure or have concerns about a child’s water, contact a doctor or pediatrician; seek urgent care for severe symptoms such as seizures or confusion.
How can you check your own utility?
- Identify your supplier. Look at your water bill or ask your landlord. The system name and public water system ID can help distinguish similarly named suppliers.
- Read current notices. Check the utility’s notices for instructions that apply to your address. Follow any drinking-water advisory, including directions about an alternative water supply.
- Review the annual water quality report. Look for reported test results and explanations of violations, then contact the utility if you need help interpreting them.
- Consider your plumbing. Ask about the service line and use a qualified laboratory to test your tap if lead is a concern.
If you use a private well rather than a community water system, the statewide system totals do not describe your well. Contact your local health department for testing guidance.
Where do the EPA figures come from?
These figures come from EPA’s Enforcement and Compliance History Online (ECHO) Safe Drinking Water Act data, drawn from the Safe Drinking Water Information System. They were retrieved on November 3, 2026, and reflect records available at that time.
ECHO is useful for comparing reported compliance histories, but it is not a real-time test of water at your faucet. For the latest local information, check your utility’s current notices and annual water quality report.
Frequently asked questions
Can you tell whether tap water contains lead by taste?
No. Lead cannot reliably be detected by the taste, smell or appearance of water. A tap-water test can help identify lead in the sample.
Does every violation mean residents must use bottled water?
No. Violations differ, and the appropriate response depends on the circumstances. Follow your utility’s current notice or contact it for instructions.
Does a water filter need maintenance?
Yes. Follow the manufacturer’s instructions for replacing cartridges and maintaining the filter, and check that it is certified for the contaminant you want to reduce.