Is Tap Water Safe to Drink in New Haven?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Regional Water Authority had no health-based drinking water violations reported in the EPA record for the last 3 years. That finding applies to the utility’s water, not necessarily to every home’s plumbing, and older PFAS testing found some results above EPA’s limits.

The record is a useful starting point, but check the utility’s current notices and annual water quality report for the latest information. For broader context, see tap water safety by state.

Who supplies New Haven’s water, and where does it come from?

The Regional Water Authority is the main water system serving New Haven. EPA identifies its primary source as surface water, meaning water collected above ground rather than from groundwater sources.

The system serves about 418,900 people across its service area, not just the city of New Haven. Check your water bill or ask the utility if you are unsure whether your home receives its water; this record does not describe a private well or another supplier.

What does the EPA violation record show?

The EPA record for the Regional Water Authority, public water system ID CT0930011, reports the following for the last 3 years:

MeasureEPA record
People served418,900
Health-based violationsNone reported
Open violationsNone reported
Lead action-level exceedances0 reported

The data also show zero quarters with reported violations among the last 12 quarters. An undetermined quarter in the compliance history means that quarter’s status is not established in the record.

A health-based violation concerns a drinking water health standard. A monitoring or reporting violation, by contrast, can mean a required test or paperwork was missed or late; it does not by itself mean the water was contaminated. Neither type was reported for this system in the 3-year record.

What did PFAS testing find?

PFAS are a group of long-lasting chemicals often called “forever chemicals.” EPA’s UCMR 5 occurrence data include results for the Regional Water Authority from samples collected between September 18, 2023, and June 11, 2024, during the national 2023–2025 survey.

PFASSamples with detectionsHighest resultEPA limit
PFOA4 of 307.1 parts per trillion (ppt)4.0 ppt
PFOS7 of 3010.7 ppt4.0 ppt

Both maximum results were above the respective limits EPA has set. However, a maximum sample result alone does not establish a violation: compliance is based on running annual averages. The UCMR 5 results also do not establish today’s water levels; ask the utility for its latest results and notices.

The survey also detected PFBS in 3 of 30 samples, with a maximum of 3.5 ppt. PFNA, PFHxS and GenX were not detected in their 30 samples each. “Not detected” means a result was below the test’s reporting limit, not necessarily that the chemical was absent.

Could lead come from household plumbing?

Yes. Even when the utility has no reported lead action-level exceedances, lead can enter water from a home’s service line, plumbing or fixtures. A system-level record cannot confirm the lead level at an individual tap.

EPA’s lead action level is 15 parts per billion (ppb), while its health goal for lead in drinking water is zero. Use cold tap water for drinking and cooking, and consider testing if you do not know whether your plumbing contains lead. Boiling does not remove lead.

Infants, young children and pregnant people need particular care around lead exposure. If you are concerned about exposure, ask a healthcare professional whether blood lead testing is appropriate; use appropriately filtered water or another suitable drinking water source while investigating.

Can you use the water for ice, brushing teeth and washing produce?

In the absence of a current advisory, use the same water you would use for drinking to make ice and rinse produce. The EPA system record does not identify a health-based violation, but it cannot rule out a problem at your own tap.

For brushing teeth, also check current utility guidance if an advisory is in effect. Follow the exact instructions in any boil-water or do-not-use notice: boiling is not a remedy for lead or PFAS, and different notices can require different precautions.

How can you get extra protection?

A water test can answer questions the system record cannot. For lead, ask a state-certified laboratory about sampling your tap and follow its collection instructions; our guide explains how to test water quality at home. Ask the laboratory which tests are appropriate, since a lead test will not automatically measure PFAS.

If you choose a filter, look for independent certification for the specific contaminant you want to reduce. Check the product’s certified claims for lead or for PFOA and PFOS rather than assuming every pitcher removes them. Our guide to the best pitcher water filters can help you compare options.

Install and maintain any filter according to its instructions, including cartridge replacements. For current local information or an unusual change in your water, contact the Regional Water Authority or your local health department.

Where does the data come from?

The violation and system information comes from the EPA’s detailed facility report for the Regional Water Authority, using Safe Drinking Water Act data. It was retrieved on November 3, 2026.

The PFAS results come from EPA’s UCMR 5 occurrence data file dated October 15, 2026. For updates after those records were retrieved, consult the utility’s current notices and annual water quality report.

Frequently asked questions

Can I tell whether water contains lead or PFAS by taste?

You cannot rely on taste, smell or appearance to rule out lead or PFAS. Testing is the way to check for them.

What does one part per trillion mean in water testing?

For water, one part per trillion is approximately one nanogram per liter. It is a unit of concentration, not a measure of whether a particular result violates a standard.