Is Tap Water Safe to Drink in Naperville?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Naperville had no health-based drinking water violations in the last 3 years, though it did have monitoring and reporting violations involving missed or late tests or paperwork—not proof that the water was contaminated.

What does the EPA verdict mean for Naperville?

The EPA record does not report a health-based violation for Naperville during the last 3 years. It does report monitoring and reporting violations, which concern testing or paperwork requirements rather than a finding that the water exceeded a health standard.

That record covers the public water system, not every home’s plumbing. For a broader comparison, see tap water safety by state.

Who supplies Naperville’s water, and where does it come from?

Naperville is the locally owned public water system listed in EPA records under the name NAPERVILLE. The EPA identifies its source as purchased surface water.

The record does not name a specific lake or other source. Check Naperville’s annual water quality report for more detail about the source and treatment, and consult the utility’s notices for current information.

What violations did EPA record in the last 3 years?

SystemPeople servedHealth-based violationsOpen violationsLead action-level exceedances
Naperville, IL0434670156,406NoNo current contaminant or rule listedNone reported

EPA reports violations in 10 of the last 12 quarters and categorizes the violations as monitoring and reporting. Its record lists chemicals including atrazine, endrin and chlordane in connection with those violations. Their appearance in the record is not, by itself, a finding that they were detected in the water or exceeded a health standard.

The absence of a current contaminant or rule in the record should not be read as a substitute for checking the utility’s current notices. The lead entry is a system-level record; it does not establish the lead level at an individual tap.

What did PFAS testing find?

EPA’s one-time UCMR 5 survey tested Naperville’s water between January 2 and October 1, 2024. The following substances were not detected in any of the listed samples:

PFASSamplesReporting limit
PFOA44.0 parts per trillion (ppt)
PFOS44.0 ppt
PFNA44.0 ppt
PFHxS43.0 ppt
PFBS43.0 ppt
HFPO-DA, also called GenX45.0 ppt

EPA has set limits of 4.0 ppt for PFOA and PFOS. Neither was detected at its 4.0 ppt reporting limit, so there was no detected maximum to compare with those limits. A nondetection does not mean the concentration was zero, and these survey results alone do not determine regulatory compliance; compliance is based on running annual averages.

The results come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026. They describe the survey samples, not a continuous measurement at every home.

Can household plumbing add lead to the water?

Yes. Lead can enter drinking water from service lines, plumbing or fixtures, even when a utility’s record reports no lead action-level exceedance. EPA’s lead health goal is zero, and its current action level is 15 parts per billion (ppb); the system-level action level is not a guarantee about an individual tap.

If you are concerned about lead, ask Naperville or your local health department about your service line and arrange a drinking water test through a certified laboratory. Use cold water for drinking and cooking, and follow the laboratory’s sampling instructions. Boiling does not remove lead.

Can you use Naperville tap water for ice, brushing teeth and washing produce?

Use the same water for ice, brushing teeth and washing produce that you would choose for drinking. Tap water may be used for these purposes when no current advisory applies and you have no reason to suspect a household plumbing problem, but the EPA record does not independently test every home.

If the utility issues an advisory, follow its instructions for each activity. A boil-water notice and a do-not-drink notice can require different precautions; boiling does not remove lead or PFAS.

How can you get extra protection?

A home test can answer questions that the utility-wide record cannot, particularly about lead from household plumbing. Choose a certified laboratory and ask which tests fit your concerns; see how to test water quality at home for the process.

If you choose a filter, look for independent certification that specifically lists the contaminant you want to reduce. Not every pitcher filter reduces lead or PFAS, and cartridges must be replaced as directed. Our guide to the best pitcher water filters explains what to look for.

Pregnant people and families with infants or young children should be especially attentive to possible lead exposure. If a test indicates lead or you are concerned about exposure, contact a healthcare professional for advice and the utility or local health department about the water.

Where does this information come from?

The violation and system details come from the EPA’s Naperville drinking water report, retrieved November 3, 2026. PFAS information comes from the EPA survey data linked above.

EPA records and survey results are snapshots, not a guarantee of conditions today. For the latest local information, check Naperville’s current notices and annual water quality report.

Frequently asked questions

Can you tell whether tap water contains lead by taste or appearance?

No. Lead cannot reliably be seen, tasted or smelled in water; a laboratory test can check the water from your tap.

Do Naperville’s public water system results cover private wells?

No. A private well is not part of Naperville’s public water system record. Well owners are responsible for arranging testing of their own water.