Is Tap Water Safe to Drink in Murfreesboro?
Mostly yes, with caveats: the EPA summary for Murfreesboro Water Department indicates health-based violations in the past 3 years, with none currently open. A separate health-based violation flag in the same record says “No,” so the record needs clarification from the utility.
What does the safety verdict mean?
The verdict reflects the retrieved EPA record, not a guarantee about every tap or a live assessment of current conditions. The record also lists past violations under the Revised Total Coliform Rule, which concerns bacteria used to indicate possible microbial contamination.
Murfreesboro Water Department’s record identifies no currently open violation, but its separate health-based flag conflicts with the verdict summary. Ask the utility for its latest notices and annual water quality report to understand the past violations and any current instructions. For a broader comparison, see tap water safety by state.
Who supplies Murfreesboro’s water, and where does it come from?
Murfreesboro Water Department is the main system in the EPA record. Consolidated U.d. of Rutherford CO also serves parts of the city. Both systems are locally owned and list surface water as their primary source.
Check your water bill or ask the utility which system serves your address. The population served by a system can include people outside Murfreesboro, so it should not be treated as the city’s population.
What does the EPA violation record show for the last 3 years?
The table summarizes the records retrieved on November 3, 2026. “None reported” for lead means no action-level exceedance was reported in the record; it does not mean every home was tested.
| Water system | People served | Health-based violations in last 3 years | Open violations | Lead action-level exceedances in last 3 years |
|---|---|---|---|---|
| Murfreesboro Water Department | 114,331 | Verdict summary says yes; separate flag says no | None reported | None reported |
| Consolidated U.d. of Rutherford CO | 221,871 | None reported | None reported | None reported |
Murfreesboro Water Department’s record lists violations in 2 of the last 12 quarters, with those quarters coded as significant or serious; a separate serious-violator flag says “No.” The listed categories include a maximum contaminant level violation and an “other violation,” but the record summary does not explain their circumstances. Consolidated U.d. of Rutherford CO has no violations reported in those 12 quarters.
A monitoring or reporting violation means a required test or report was missed or late; it does not, by itself, establish that water was contaminated. Consult the utility’s notices for the details of any specific violation.
What did PFAS testing find?
PFAS are often called “forever chemicals” because many persist in the environment. EPA’s UCMR 5 survey tested drinking water nationally during 2023–2025. The results below are from the EPA occurrence data, not a current reading at an individual tap.
| System | PFOA results | PFOS results |
|---|---|---|
| Murfreesboro Water Department | Detected in 1 of 4 samples; maximum 6.0 parts per trillion (ppt) | Not detected in 4 samples |
| Consolidated U.d. of Rutherford CO | Not detected in 4 samples | Not detected in 4 samples |
Murfreesboro Water Department sampled from May 30, 2023, to February 20, 2024; Consolidated U.d. of Rutherford CO sampled from January 11, 2023, to January 2, 2024. EPA has set limits of 4.0 ppt each for PFOA and PFOS. Murfreesboro Water Department’s maximum PFOA result was above 4.0 ppt, but a single maximum does not establish a violation: compliance is based on running annual averages.
“Not detected” does not mean zero. The reporting limit for PFOA and PFOS in these results was 4.0 ppt. Both systems also detected PFBS in 1 of 4 samples; their respective maximums were 13.9 ppt and 5.8 ppt. Ask your utility for its latest PFAS results.
Can household plumbing add lead?
Yes. A utility’s record describes its system and cannot rule out lead from a home’s service line, plumbing or fixtures. EPA’s lead health goal is zero; its current action level is 15 parts per billion (ppb), a system-level regulatory measure rather than a safety guarantee for an individual tap.
Use cold tap water for drinking and cooking, and ask your utility about flushing guidance and service-line information. Testing water at your own tap is the way to assess that location. Boiling does not remove lead.
Can you use tap water for ice, brushing teeth and washing produce?
The EPA record alone does not establish a current restriction on these uses. Check your utility’s current notices, because any advisory may give specific instructions for drinking, making ice, brushing teeth or washing produce.
If an advisory is issued, follow its instructions and use an alternative water source when directed. People who are pregnant, have infants or young children, or are immunocompromised should ask a clinician about concerns specific to their situation. Contact a clinician if you are concerned about possible exposure or symptoms; the water record cannot diagnose their cause.
How can you get extra protection?
For a tap-specific result, ask your utility or state drinking-water program about a certified laboratory and follow its sampling instructions. Our guide explains how to test water quality at home. A household test is especially useful for questions about lead from plumbing.
If you choose a filter, look for independent certification for the contaminants you want to reduce, such as lead, PFOA or PFOS, and follow the cartridge replacement instructions. Certification claims vary by model; see our guide to the best pitcher water filters. Boiling does not remove PFAS, and an ordinary filter should not be assumed to make microbiologically unsafe water safe.
Where does this information come from?
The violation and system information comes from EPA ECHO Safe Drinking Water Act records, retrieved November 3, 2026: Murfreesboro Water Department’s EPA report and Consolidated U.d. of Rutherford CO’s EPA report. The PFAS figures come from EPA’s UCMR 5 occurrence-data file dated October 15, 2026.
These records are snapshots. Ask your water provider for its latest annual water quality report and any current public notices, particularly to clarify the conflicting health-based violation fields.
Frequently asked questions
Can you taste or see lead in tap water?
You cannot reliably identify lead by looking at or tasting water. A laboratory test of water from your tap can help assess lead at that location.
Does boiling water remove lead or PFAS?
No. Boiling does not remove lead or PFAS. Follow your utility’s instructions if a boil-water advisory is issued for microbial contamination.
How can I find out which water system serves my address?
Check the name on your water bill or contact the listed provider. Your address determines which system’s reports and notices are relevant.