Is Tap Water Safe to Drink in Montgomery?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Montgomery, the WW&SSB of the City of had no health-based drinking water violations in EPA’s record for the last 3 years.

What does Montgomery’s tap water verdict mean?

EPA’s record shows no health-based violations for Montgomery’s water utility during the last 3 years. That is a useful compliance indicator, but it does not guarantee that every contaminant is absent or describe conditions in a particular home’s pipes.

Check the utility’s current notices and annual water quality report for the latest information. For a broader comparison, see tap water safety by state.

Who supplies Montgomery’s water, and where does it come from?

Montgomery’s main listed supplier is Montgomery, the WW&SSB of the City of, a local-government-owned utility. Its EPA public water system ID is AL0001070, and its primary source is surface water.

Surface water is water collected above ground, such as water in rivers or reservoirs. The utility’s annual water quality report is the place to check for details about the specific source and the latest water quality results.

What does EPA’s violation record show?

The EPA record retrieved on November 3, 2026, gives the following summary for the utility. “None reported” does not mean that every home’s tap water has been tested.

SystemPeople servedHealth-based violations, last 3 yearsOpen violationsLead action-level exceedances, last 3 years
Montgomery, the WW&SSB of the City of276,000None reportedNone reportedNone reported

The record lists zero rules violated over the 3-year period. Health-based violations involve a contaminant limit or a required treatment technique; monitoring or reporting violations generally involve missed or late tests or paperwork, not evidence by themselves that water is contaminated.

The population served is a utility figure, not the same measure as Montgomery’s estimated city population of 195,287 in 2023. The record’s lead entry means no action-level exceedances were reported, not that lead was absent from every sample or household.

What did PFAS testing find?

PFAS are a group of long-lasting chemicals sometimes called “forever chemicals.” EPA’s one-time UCMR 5 survey ran nationally from 2023 through 2025. Montgomery Water Works’ listed sampling took place from March 16 through December 7, 2023.

ChemicalMontgomery resultReporting limitEPA drinking water limit
PFOANot detected in 16 samples4.0 parts per trillion4.0 parts per trillion
PFOSNot detected in 16 samples4.0 parts per trillion4.0 parts per trillion

“Not detected” means a result was below the reporting limit, not necessarily zero. The reporting limits for these tests matched EPA’s limits, so the results cannot distinguish zero from concentrations below 4.0 parts per trillion. The survey results alone also do not establish current compliance, which is assessed using running annual averages.

The listed results also reported no detections for PFBS, PFHxS, PFNA and HFPO-DA, also known as GenX. They do not establish that every PFAS is absent. Consult the utility’s annual report and notices for more recent information.

Could household plumbing add lead?

Yes. Even when a utility has no reported lead action-level exceedance, lead can enter water through household service lines, plumbing or fixtures. EPA’s lead health goal is zero; the current action level is 15 parts per billion. EPA’s 2024 rule lowers the action level to 10 parts per billion, with compliance from 2037.

Use cold tap water for drinking, cooking and preparing infant formula. Boiling does not remove lead. A household water test can help identify a problem at your own tap.

Infants, young children and pregnant people are particularly vulnerable to lead exposure. If you are concerned about possible exposure, contact a health professional; a child’s clinician can advise whether a blood lead test is appropriate.

Can you use the water for ice, brushing teeth and washing produce?

When no notice restricts those uses, tap water can be used to make ice, brush teeth and rinse produce. The utility’s compliance record does not, however, rule out a problem in your own plumbing.

If the utility or a public health authority issues an advisory, follow its instructions for each use. Pay particular attention to directions for drinking water and preparing infant formula; boiling is not a remedy for every contaminant.

How can you get extra protection?

If you want information specific to your home, consider testing water from your tap through an appropriately accredited laboratory. Ask the lab which contaminants to test for and follow its sampling instructions. Our guide explains how to test water quality at home.

A filter is another option, but choose one independently certified to reduce the particular contaminant you are concerned about, such as lead, PFOA or PFOS. Check the product’s specific certification claims and replace filters as directed; not every pitcher filter removes every contaminant. See our guide to the best pitcher water filters.

Where does the Montgomery water data come from?

The violation and system information comes from EPA’s ECHO drinking water facility report, retrieved November 3, 2026. PFAS results come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026.

These sources describe recorded results, not a continuous test of every tap. For current advisories and the latest annual water quality report, check with Montgomery’s utility.

Frequently asked questions

What does a PFAS result in parts per trillion mean?

Parts per trillion expresses a very small concentration. In water, 1 part per trillion is approximately equivalent to 1 nanogram per liter.

Will a water softener necessarily remove lead?

Do not assume it will. If lead reduction is your goal, look for a product independently certified for that specific claim and follow its maintenance instructions.