Is Tap Water Safe to Drink in Montana?
Yes, for most residents: EPA records show that 1.5% of people served by Montana community water systems were served by systems with health-based violations in the past 3 years, and Billings City of had no recorded violations during that period.
What does the Montana tap water verdict mean?
The verdict is based on a statewide EPA record, not a test of every tap. Most people on Montana community water systems were served by systems without a recorded health-based violation in the 3-year period. The record does not establish that every household’s water is free of contaminants.
Your local system and your home’s plumbing both matter. For comparisons with other states, see tap water safety by state. For current local information, check your utility’s notices and annual water quality report.
How many Montana water systems had health-based violations?
The EPA record lists 851 Montana community water systems serving 827,162 people. Of those systems, 24 had a health-based violation in the past 3 years; they served 12,010 people, or 1.5% of the population served by the listed systems.
A health-based violation means a system exceeded a maximum contaminant level or violated a required treatment technique. Most systems with violations were small. The record also identified 8 systems as serious violators and 28 systems with a reported lead action level exceedance in the 3-year period.
These counts describe the systems in the EPA record, not every Montana drinking-water source. In particular, a statewide community-system total cannot tell a private well owner what is in their water.
What do the largest Montana water systems’ EPA records show?
The following table summarizes the 3-year EPA record retrieved on November 3, 2026. Each system name links to its EPA detailed facility report.
| Water system | People served | EPA record |
|---|---|---|
| Billings City of | 114,000 | No violations recorded in the 3-year period. |
| Missoula Water | 68,200 | No violations recorded; 1 lead action level exceedance reported. |
| Great Falls City of | 60,000 | No violations recorded in the 3-year period. |
| Bozeman City of | 56,000 | No violations recorded in the 3-year period. |
| Butte Silverbow Water Dept | 33,000 | No health-based violation flagged; violations recorded in 2 of the last 12 quarters. |
| Helena Water System | 32,091 | No violations recorded in the 3-year period. |
| Kalispell Public Works | 25,000 | No violations recorded in the 3-year period. |
| Billings Heights CO Water Dist of | 12,000 | No health-based violation flagged; violations recorded in 5 of the last 12 quarters. |
For Butte Silverbow Water Dept and Billings Heights CO Water Dist of, the record lists monitoring and reporting violations and other violations. It also lists rules for total haloacetic acids and total trihalomethanes, which are disinfection byproducts.
Monitoring and reporting violations mean tests or paperwork were missed or submitted late; they do not by themselves establish that the water was contaminated. Consult each utility’s notices and annual report for current details about its record.
Can lead enter water from household plumbing?
Yes. A utility’s clean EPA record covers the utility’s water record, not the condition of a particular home’s pipes, fixtures or service line. Testing at the tap is the way to find out whether lead is present in your household’s water.
EPA’s health goal for lead in drinking water is zero. Its lead action level is 15 parts per billion, or 0.015 milligrams per liter; an action level exceedance is a regulatory finding, not a measurement at every home. Missoula Water’s reported exceedance is separate from its record of no health-based violations.
If you are concerned about lead, use water from a source you know is suitable for drinking or a filter certified to reduce lead, following the filter’s instructions. Boiling water does not remove lead. Our guide to the best pitcher water filters can help you compare options, but check a filter’s certification for the specific contaminant you want to reduce.
Infants, young children and pregnant people are especially vulnerable to lead exposure. If you think you or your child may have been exposed, ask a clinician about testing and next steps. People with weakened immune systems should also ask their clinician about precautions when a water advisory is issued.
How can you check your own Montana water supply?
- Identify your provider. Check your water bill or ask your property manager which system serves your address. A city name alone may not identify the correct system.
- Read current notices and the annual water quality report. Ask the utility for these if you cannot find them. They provide local information beyond the statewide summary.
- Check the EPA record. Use the system’s facility report to review recorded violations, then ask the utility about anything you do not understand. Follow any current drinking-water advisory from the utility or local authorities.
- Consider testing your tap. A household test can address concerns that a utility-wide record cannot, including lead from plumbing. Learn how to test water quality at home and use an appropriate certified laboratory when needed.
If you use a private well, contact your local health department for testing guidance; the community-system record does not assess your individual well.
Where does the Montana water data come from?
The figures come from EPA’s Enforcement and Compliance History Online, or ECHO, using Safe Drinking Water Act data from the Safe Drinking Water Information System. The records were retrieved on November 3, 2026.
The linked facility reports show the EPA records for the systems in the table. They are a historical compliance snapshot, not a substitute for current utility notices, an annual report or a test of water at your own tap.
Frequently asked questions
Can you taste or smell lead in tap water?
No. You cannot reliably detect lead by taste or smell, so testing is needed to check your tap.
Does a pitcher filter remove every water contaminant?
No. Filter capabilities vary, so check its certification for the contaminant you want to reduce and follow the manufacturer’s instructions.
What does a water system’s population served represent?
It is the number of people the system is reported to serve, not the number of homes tested or the number of people exposed to a contaminant.