Is Tap Water Safe to Drink in Missoula?

DetoxWater Editorial Team•Published November 5, 2026

Generally yes, but check for lead: Missoula Water had no health-based violations in the past 3 years, but lead exceeded the action level in some homes.

What does the tap water verdict mean?

The EPA record gives a generally reassuring picture of Missoula Water’s system, but the reported lead action-level exceedance makes household testing worth considering. A system record cannot tell you how much lead is in water from your own tap.

The record is a snapshot, not a guarantee about current conditions. For a broader comparison, see our guide to tap water safety by state.

Who supplies Missoula’s water, and where does it come from?

Missoula Water is a local-government-owned utility that uses groundwater as its primary source. The EPA record lists the system as serving 68,200 people; that figure is the population served by the utility, not necessarily everyone in Missoula.

If you are unsure whether your home is served by Missoula Water, check your water bill or ask the utility. Its EPA public water system identification number is MT0000294.

What violations appear in the EPA record?

The record retrieved on November 3, 2026, covers the following measures for Missoula Water:

MeasureEPA record
People served68,200
Health-based violations in the last 3 yearsNone reported
Quarters with violations in the last 12 quarters0
Open violationsNone reported
Lead action-level exceedances in the last 3 years1

The lead exceedance is a separate reported measure from the health-based violation flag. It does not mean every home exceeded the lead action level, and the record does not list a health-based violation for the period.

For current conditions, check Missoula Water’s notices and annual water quality report. The EPA snapshot does not replace a current notice or a test at your home.

What did PFAS testing find?

EPA’s UCMR 5 program monitored for PFAS, often called “forever chemicals,” in drinking water systems. The national survey is described as a 2023–2025 program; Missoula Water’s listed results cover April 26, 2023, through January 12, 2026.

SubstanceMissoula Water resultsReporting limitEPA limit
PFOANot detected in 46 samples4.0 parts per trillion (ppt)4.0 ppt
PFOSNot detected in 46 samples4.0 ppt4.0 ppt

Other listed PFAS, including GenX, PFBS, PFHxS and PFNA, also had no detections. The data additionally list 1,058 measurements for other PFAS with no detections.

“Not detected” means a result was below the applicable reporting limit, not necessarily that the substance was absent. EPA has set limits of 4.0 ppt each for PFOA and PFOS, but compliance is based on running annual averages; these survey results alone do not establish compliance. See the EPA UCMR 5 occurrence data.

Could lead come from household plumbing?

Yes. Lead can enter water from service lines, household plumbing, solder or fixtures, so a utility-wide record cannot establish the lead level at an individual tap. The reported exceedance is a reason to check your home rather than assume the result applies equally to every property.

EPA’s lead action level is 15 parts per billion (ppb), while its health goal for lead is zero. Ask Missoula Water about your service line and how to obtain a tap-water lead test. Use cold water for drinking and cooking; hot tap water can pick up more lead from plumbing.

Infants, young children and pregnant people are especially vulnerable to lead exposure. If you are concerned about exposure, contact a health professional about testing and next steps; do not rely on taste or appearance to judge the water.

Can you use the water for ice, brushing teeth and washing produce?

When there is no utility notice and no known household lead concern, the EPA record gives no reason to avoid using Missoula Water for ice, brushing teeth or washing produce. It cannot, however, rule out lead from your home’s plumbing.

If you suspect lead at your tap, use bottled water or water from a filter certified to reduce lead for those uses, as well as for drinking and preparing food or infant formula, while you seek testing advice. Follow any current instructions from Missoula Water; boiling does not remove lead.

How can you get extra protection?

A household test can answer a question the system record cannot: what is in water at your tap. Ask the utility or an accredited laboratory about lead testing, and follow the laboratory’s sampling instructions. Our guide explains how to test water quality at home.

If you choose a filter, check that its certification specifically covers the contaminants you want to reduce. A filter certified for lead reduction is different from one certified only for taste, and PFAS reduction should also be listed if that is your concern. Follow the manufacturer’s installation and replacement instructions; our guide to the best pitcher water filters explains options.

Where does this information come from?

The violation and lead-action-level figures come from EPA’s Safe Drinking Water Act data, as shown in the Missoula Water EPA facility report, retrieved November 3, 2026. The PFAS figures come from EPA’s UCMR 5 occurrence data file dated October 15, 2026.

These sources describe the utility’s reported system data, not a measurement from every household. For the latest local details, consult Missoula Water’s current notices and annual water quality report.

Frequently asked questions

Can you taste or see lead in tap water?

No. Lead cannot reliably be detected by taste, smell or appearance, so a tap-water test is needed to check your home.

Does Missoula Water’s EPA record cover a private well?

No. The record describes Missoula Water’s public system, not an individual private well. A well owner needs separate water testing.