Is Tap Water Safe to Drink in Minneapolis?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Minneapolis water utility has no health-based drinking water violations in the EPA record for the last 3 years. For a broader view, see our guide to tap water safety by state.

What does the safety verdict mean?

The EPA record shows no violations for Minneapolis in the last 12 reported quarters. That is reassuring for the utility’s water, but it does not guarantee that every contaminant is absent or account for conditions in an individual building’s plumbing.

A monitoring or reporting violation would mean a missed or late test or paperwork, rather than proof of contaminated water. No such violation is reported for Minneapolis in this record.

Who supplies Minneapolis water, and where does it come from?

The Minneapolis water utility is a local-government-owned public water system. EPA identifies its primary source as surface water and lists the system as serving 425,300 people.

The EPA system identifier is MN1270024. If you are unsure whether your address receives water from this system, check with your water provider or landlord; the record below applies to the Minneapolis system, not automatically to every nearby address.

What does EPA’s 3-year violation record show?

MeasureMinneapolis water system
People served425,300
Health-based violations in the last 3 yearsNone reported
Quarters with violations in the last 12 quarters0
Open violationsNone reported
Lead action-level exceedances in the last 3 yearsNone reported

The lead entry describes exceedances reported for the system; it does not mean every household tap was tested or contains no lead. Check the utility’s current notices and annual water quality report for more recent information and local details.

What did PFAS testing find?

PFAS are a group of long-lasting chemicals often called “forever chemicals.” In EPA’s one-time UCMR 5 survey, Minneapolis samples were collected from May 3, 2023, through July 16, 2024.

SubstanceMinneapolis resultEPA limit
PFOANot detected in 8 samples; reporting limit 4.0 parts per trillion (ppt)4.0 ppt
PFOSNot detected in 8 samples; reporting limit 4.0 ppt4.0 ppt

“Not detected” means a result was below the reporting limit, not necessarily that the concentration was zero. EPA has set a limit of 4.0 ppt for each chemical; compliance is assessed using running annual averages, so the survey results alone are not a compliance determination.

The record also reports 7 detections across 184 results for other PFAS, with a maximum reported concentration of 12.0 ppt. It does not identify the individual chemicals in that group, so that maximum cannot be compared directly with the PFOA or PFOS limits. The results come from EPA’s UCMR 5 occurrence data.

Could lead come from household plumbing?

Yes. Lead can enter water from a service line, fixtures or plumbing in or near a building, even when the utility has no reported lead action-level exceedance. EPA’s lead health goal is zero, and its current action level is 15 parts per billion (ppb); an action level is not a guarantee that an individual tap is lead-free.

Use cold tap water for drinking, cooking and preparing infant formula. If water has been sitting in the plumbing, running the cold tap before use can reduce exposure; ask the utility about guidance for your property.

If you suspect lead, use bottled water or water from a filter certified for lead reduction while you arrange testing. Do not boil water to remove lead: boiling can concentrate it. Children and pregnant people are especially vulnerable to lead exposure; contact a doctor or pediatrician for advice if exposure is suspected.

Can you use tap water for ice, brushing teeth and washing produce?

These uses generally rely on the same tap water used for drinking; the EPA record does not provide a separate safety finding for them. Use drinking-quality water to rinse produce and make ice.

If a local advisory is in effect, follow its specific instructions for drinking, ice, brushing teeth and food preparation. If you suspect contamination from household plumbing, use an appropriate alternative for those activities until you have guidance or test results.

How can you get extra protection?

Test your tap

A household test can address questions that the utility-wide record cannot, especially about lead from plumbing. Choose a qualified laboratory, ask for the contaminants you want measured and follow its sampling instructions carefully; see how to test water quality at home.

Choose a certified filter

Select a filter certified for the specific contaminant you want to reduce. For lead, look for a lead-reduction certification; for PFAS, check that the certification covers PFOA and PFOS rather than assuming every filter removes them.

Install and replace cartridges according to the manufacturer’s instructions. Our guide to the best pitcher water filters explains what to consider when comparing pitcher filters.

Where does this information come from?

The violation and system details come from the EPA ECHO drinking water report for Minneapolis, retrieved November 3, 2026. The PFAS results come from EPA’s UCMR 5 occurrence data file dated October 15, 2026.

These records describe reported system-level information, not a live measurement at your faucet. For current conditions, consult the Minneapolis water utility’s notices and annual water quality report.

Frequently asked questions

Can I tell whether my tap water contains lead by looking at it?

No. Lead can be present without changing the water’s appearance, taste or smell; a laboratory test is the way to check.

Does the Minneapolis EPA record cover private wells?

No. The record describes the Minneapolis public water system, not water from an individual private well.