Is Tap Water Safe to Drink in Memphis?
Yes, Memphis Light, Gas, & Water had no health-based drinking water violations in the last 3 years, according to the EPA record.
What does the EPA record say about Memphis tap water?
The record also lists no rules violated and no open violations for Memphis Light, Gas, & Water. It is a useful snapshot of the utility’s record, not a guarantee about the water at every tap or a substitute for checking current utility notices.
Water quality can differ by location and plumbing. For a broader comparison, see tap water safety by state.
Who supplies Memphis water, and where does it come from?
The main system in the EPA record is Memphis Light, Gas, & Water, a local-government-owned utility serving an estimated 659,500 people. Its primary water source is groundwater.
The system’s EPA public water system ID is TN0000450. If your bill identifies a different supplier, check that supplier’s record and notices instead.
What violations were reported in the last 3 years?
The EPA record retrieved on November 3, 2026, summarizes the main system’s recent violation history. A health-based violation means a drinking water health standard was violated; a monitoring or reporting violation generally means a required test or report was missed or late, not necessarily that water was contaminated.
| System | People served | Health-based violations, last 3 years | Open violations | Lead action-level exceedances, last 3 years |
|---|---|---|---|---|
| Memphis Light, Gas, & Water | 659,500 | None reported | None reported | None reported |
The record lists 0 rules violated and 0 quarters with violations among the last 12 quarters. The current quarter is marked undetermined, so check the utility’s notices for information that may have changed since the record was retrieved.
An action-level exceedance is not the same measure as a health-based violation. For lead, it reflects the results of a system’s required sampling, not a test of every individual home.
What did PFAS testing find in Memphis water?
PFAS are a group of persistent chemicals sometimes called “forever chemicals.” Under EPA’s UCMR 5 national monitoring program, Memphis Light, Gas, & Water samples were collected from April 22 to October 2, 2024. The results below are for the utility’s water, not individual household taps.
| Chemical | Samples with detections | Reporting limit | EPA limit |
|---|---|---|---|
| PFOA | 0 of 20 | 4.0 ppt | 4.0 ppt |
| PFOS | 0 of 20 | 4.0 ppt | 4.0 ppt |
| PFBS | 0 of 20 | 3.0 ppt | — |
| HFPO-DA, also called GenX | 0 of 20 | 5.0 ppt | — |
| PFNA | 0 of 20 | 4.0 ppt | — |
| PFHxS | 0 of 20 | 3.0 ppt | — |
A result of “not detected” does not prove a concentration of zero: it means the chemical was not detected at the test’s reporting limit. For PFOA and PFOS, those limits were the same as EPA’s 4.0 parts-per-trillion (ppt) limits. No numerical maximum above the reporting limit was recorded for either chemical, but regulatory compliance is based on running annual averages rather than a single sample or this table alone.
UCMR 5 was a one-time national survey, not a continuous measure of current tap water. The utility’s annual water quality report and notices are the places to check for more current information.
Can lead get into water from household plumbing?
Yes. Even when a utility has no reported lead action-level exceedance, lead can enter water through plumbing components at a property. The utility-wide record cannot establish whether lead is present at your particular tap.
EPA’s lead action level is 15 parts per billion (ppb), and its health goal for lead in drinking water is zero. An action level is used to evaluate a system’s sampling results; it is not a promise that an individual sample below that level contains no lead.
Use cold water for drinking and cooking, and consider having your tap water tested if you are concerned about your plumbing. Boiling does not remove lead or PFAS and can concentrate them.
Who should be especially careful?
Pregnant people, infants and children are especially vulnerable to lead exposure. If you are concerned about lead in drinking water or preparing infant formula, ask your healthcare professional about appropriate precautions and testing. Contact a healthcare professional if you suspect exposure; a water test alone cannot diagnose a health condition.
Can you use Memphis tap water for ice, brushing teeth and washing produce?
The EPA record does not give a utility-wide reason to avoid those uses. Check current notices from Memphis Light, Gas, & Water and consider any concerns about your own plumbing before using tap water for ice, brushing teeth or washing produce.
If an advisory is issued, follow its instructions for each use. A boil-water notice and a do-not-use notice can require different precautions, so do not assume that boiling addresses every type of water concern.
How can you get extra protection?
A test of water from your own tap can answer questions that a utility-wide record cannot. Ask the utility or your state drinking water program how to find a certified laboratory and which sampling instructions to follow; our guide explains how to test water quality at home.
If you choose a filter, look for independent certification for the specific contaminant you want to reduce. For example, check whether a product is certified to reduce lead or the particular PFAS of concern, rather than assuming every filter removes them. Install it and replace cartridges according to the manufacturer’s instructions; see our guide to the best pitcher water filters.
Where does the Memphis water data come from?
The violation and system information comes from the EPA ECHO detailed facility report, using Safe Drinking Water Act data, retrieved on November 3, 2026. EPA’s UCMR 5 occurrence data is the source for the PFAS results; the occurrence file is dated October 15, 2026.
These sources describe the reported utility record and past sampling, not every home’s plumbing or all current conditions. For the latest details, consult Memphis Light, Gas, & Water’s notices and annual water quality report.
Frequently asked questions
Does boiling Memphis tap water remove lead or PFAS?
No. Boiling does not remove lead or PFAS and can concentrate them. Follow the utility’s instructions if an advisory is in effect.
Can clear-looking water still contain lead or PFAS?
Yes. Appearance alone cannot establish whether lead or PFAS is present; a suitable laboratory test is needed to check.
Do water filters need maintenance?
Yes. Follow the manufacturer’s installation and cartridge replacement instructions, and choose a filter certified for the specific contaminant you want to reduce.