Is Tap Water Safe to Drink in McKinney?
Yes, the City of Mckinney had no health-based drinking water violations in the EPA record for the last 3 years.
Is McKinney tap water safe to drink?
The EPA record describes the public water system, not every home's plumbing or the water at every tap. Check the utility's current notices and annual water quality report for the latest information. For a broader comparison, see tap water safety by state.
Who supplies McKinney's water, and where does it come from?
The City of Mckinney is the local-government-owned public water system identified in the EPA record. Its system ID is TX0430039, and it serves a reported 224,043 people.
The system's primary source is purchased surface water. The record summarized here does not identify the individual water bodies supplying it, so check the utility's annual water quality report for source details. If you are unsure whether your address receives water from this system, check your water bill or contact the utility.
What does the EPA violation record show?
The following is the EPA record for the City of Mckinney over the last 3 years, as retrieved on November 3, 2026. A health-based violation concerns a drinking water health standard; a monitoring or reporting violation concerns missed or late tests or paperwork and does not by itself mean the water was contaminated.
| Record item | City of Mckinney |
|---|---|
| People served | 224,043 |
| Health-based violations in the last 3 years | None reported |
| Open violations | None listed |
| Lead action-level exceedances in the last 3 years | None reported |
The record lists no rules violated in the last 3 years. Its most recent compliance-history quarter is marked undetermined, so the record should not be read as a final assessment of that quarter.
An absence of reported violations does not guarantee current conditions or the quality of an individual home's water. For current details, consult the utility's notices and annual water quality report.
What did PFAS testing find?
PFAS are a group of chemicals often called “forever chemicals.” EPA's UCMR 5 was a one-time national monitoring survey conducted during 2023–2025; it was not continuous testing. The City of Mckinney's reported sampling period ran from August 13, 2024, through June 10, 2025.
| PFAS | Reported result | EPA limit |
|---|---|---|
| PFOA | Not detected in 4 samples; reporting limit was 4.0 parts per trillion (ppt) | 4.0 ppt |
| PFOS | Not detected in 4 samples; reporting limit was 4.0 ppt | 4.0 ppt |
A result below the reporting limit is reported as not detected; it does not establish that the concentration was zero. EPA has set limits of 4.0 ppt for both PFOA and PFOS, but these survey results alone do not establish compliance, which is based on running annual averages.
The results also group other PFAS together: 4 detections were reported among 92 results, with a maximum of 8.7 ppt. The summary does not identify the detected chemicals, so that maximum should not be compared with the PFOA or PFOS limits.
Could lead enter water from household plumbing?
Yes. Even when a utility has no reported lead action-level exceedances, lead can enter water through a property's service line, solder or fixtures. The system-wide record does not tell you whether an individual tap contains lead.
EPA's lead action level is 15 parts per billion (ppb), while its health goal is zero. An action level is used in a system-wide regulatory process; it is not a guarantee that water from every tap is lead-free. EPA's 2024 rule lowers the action level to 10 ppb, with compliance from 2037.
If you are concerned about lead, use cold water for drinking and cooking and consider testing your tap. Do not rely on boiling to remove lead.
Can you use McKinney tap water for ice, brushing teeth and washing produce?
Generally, these uses are reasonable when there is no current utility advisory and you have no reason to suspect a household plumbing problem. The EPA record alone cannot confirm the quality of water at a particular tap.
Check and follow current utility notices if an advisory is issued. If you suspect lead or another plumbing-related contaminant, use an appropriate alternative water source until you have more information; freezing water does not remove lead.
How can you get extra protection?
Start by checking the utility's notices and annual report, then consider whether your household plumbing or a specific contaminant warrants a tap test. A certified laboratory can advise on sampling instructions and the substances it can measure. Our guide explains how to test water quality at home.
A filter is another option, but choose one certified for the specific contaminant you want to reduce. For example, look for a lead-reduction claim under NSF/ANSI Standard 53 or 58; for PFOA or PFOS, check that the device's certification specifically includes those chemicals. Follow the manufacturer's installation and cartridge-replacement instructions. See our guide to the best pitcher water filters for options.
Who should be careful, and when should you see a doctor?
If you are pregnant, preparing infant formula or caring for a child and suspect a lead problem, use an appropriate alternative water source while you investigate. Contact a clinician about whether testing for lead exposure is appropriate. For other medical concerns about water exposure, ask a healthcare professional for advice tailored to your situation.
Where does this information come from?
The violation and system details come from the EPA detailed facility report for the City of Mckinney, using Safe Drinking Water Act data retrieved on November 3, 2026. The PFAS results come from EPA's UCMR 5 occurrence data file dated October 15, 2026.
These sources describe reported system data and survey results, not a real-time test of your tap. The utility's current notices and annual water quality report are the places to check for newer local information.
Frequently asked questions
Can you tell whether tap water contains lead by tasting it?
No. Lead in drinking water cannot reliably be detected by taste, smell or appearance. A laboratory test is the way to find out whether it is present at your tap.
Is a PFAS result in parts per trillion the same as one in parts per billion?
No. One part per billion equals 1,000 parts per trillion, so check the unit before comparing a result with a limit.