Is Tap Water Safe to Drink in Massachusetts?

DetoxWater Editorial Team•Published November 5, 2026

Mostly, but check your utility: 8.5% of people counted were served by systems with a health-based violation in the past 3 years, including Boston Water and Sewer Commission (MWRA).

The EPA record does not give a single answer for every Massachusetts household. Your utility’s record and your home’s plumbing both matter. For comparisons with other states, see tap water safety by state.

What does the Massachusetts tap water verdict mean?

Many Massachusetts community water systems had no health-based violation recorded in the 3-year period, but some did. A health-based violation means a system had a recorded maximum contaminant level or treatment technique violation. The record does not, by itself, establish the quality of water at every individual tap.

The distinction between violation types matters. A monitoring and reporting violation concerns missed or late tests or paperwork; it does not, by itself, mean the water was contaminated. Check your utility’s current notices and annual water quality report for details relevant to your address.

How many Massachusetts systems had health-based violations?

EPA records retrieved on November 3, 2026, list 529 Massachusetts community water systems serving a reported total of 10,830,007 people. Of those systems, 13 had health-based violations in the preceding 3 years, serving a reported 919,083 people, or 8.5% of the total served.

The figures count populations reported by systems, not necessarily distinct residents. Some systems purchase water from other systems, so the populations reported can overlap. EPA also listed 7 systems as serious violators and recorded lead action-level exceedances at 33 systems during the 3-year period.

What do the largest water systems’ EPA records show?

The table shows the reported population served and violations in the last 12 quarters, or approximately 3 years. Follow each utility link to its EPA record.

SystemPeople servedEPA record
MWRA2,580,000No violation quarters recorded.
Tri Town Water Board856,000No violation quarters recorded.
Boston Water and Sewer Commission (MWRA)675,64712 of 12 violation quarters; Lead and Copper Rule treatment technique violation and 4 lead action-level exceedances recorded.
Worcester DPWP, Water Supply Division206,518No violation quarters recorded.
Springfield Water and Sewer Commission169,17012 of 12 violation quarters; maximum contaminant level violation for total haloacetic acids and a serious violator flag.
Lowell Regional Water Utility120,41812 of 12 violation quarters; Lead and Copper Rule monitoring and reporting violation.
Cambridge Water Department118,214No violation quarters recorded.
Quincy Water Dept. (MWRA)106,000No violation quarters recorded, but 2 lead action-level exceedances were reported.

Total haloacetic acids, also called HAA5, are disinfection byproducts. The EPA record for Springfield Water and Sewer Commission lists that maximum contaminant level violation and a serious violator flag, while its separate health-based violation flag is marked “No.” Check the utility’s notices and annual report for current details rather than assuming the record means there was no concern.

Boston Water and Sewer Commission (MWRA) purchases water supplied by MWRA, but the two have separate EPA records. Similarly, the two reported lead exceedances for Quincy Water Dept. (MWRA) should not be overlooked just because its record shows no violation quarters.

Can household plumbing affect lead in tap water?

Yes. A utility record with no violations does not establish the lead level at an individual tap. Lead can enter water from service lines, plumbing or fixtures, so a household may need its own test even when its utility’s record shows no violations.

EPA’s lead health goal is zero. Its regulatory action level is 15 parts per billion (0.015 mg/L); that system-level action threshold is not a guarantee that an individual tap is free of lead. Ask your utility about your service line and how to arrange a laboratory test. Our guide explains how to test water quality at home.

Use cold tap water for drinking and cooking. Running water before use can reduce lead where water has stood in plumbing, but boiling does not remove lead. If choosing a filter, look for certification for lead reduction and follow its maintenance instructions; our guide to the best pitcher water filters discusses options.

Who should be careful?

Infants, children and pregnant people are especially vulnerable to lead exposure. If you suspect exposure, contact a clinician for advice on appropriate testing. Follow any current utility drinking-water notice, including directions to use an alternative water source if advised.

How can you check your own utility?

Start with the utility named on your water bill, or ask your landlord or property manager if you do not receive a bill. Match the name to its EPA record, then request or read the utility’s latest annual water quality report and check for current notices.

Look at what kind of issue is recorded: a contaminant level, a treatment technique requirement, or monitoring and reporting. Ask the utility what its current notice means for drinking and cooking; the EPA snapshot alone cannot tell you the present condition at your tap.

If your home has a private well, community-system records do not establish its water quality. Arrange testing with a qualified laboratory and ask local health officials which tests are appropriate.

Where does the EPA data come from?

These figures come from EPA’s Enforcement and Compliance History Online (ECHO) Safe Drinking Water Act data, using information from the Safe Drinking Water Information System. The records and statewide figures were retrieved on November 3, 2026.

ECHO is a compliance record, not a real-time household water test. Use the linked utility records for the reported history, and check the utility’s own notices and annual water quality report for the latest information.

Frequently asked questions

Does everyone in Massachusetts need bottled water?

Not necessarily. Check your utility’s current notices and follow any instructions to use an alternative water source.

Does a pitcher filter remove every contaminant?

No. Check the filter’s certification for the specific contaminant you want to reduce, and maintain it according to its instructions.

Can an EPA system record tell me the lead level at my kitchen tap?

No. The system record does not replace a test of water from your own tap; your utility can help you find testing options.