Is Tap Water Safe to Drink in Maryland?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: the Washington Suburban Sanitary Commission had no health-based violation in EPA’s three-year record, and 696 of the 5,531,909 people served by Maryland community water systems were served by systems with one—a share rounded to 0.0%.

Is Maryland tap water safe to drink?

The EPA record supports that answer for most people served by community water systems, but it does not guarantee that every tap is free of contaminants. Records differ by utility, and a system’s record does not cover lead or other problems that may arise from a home’s own plumbing.

Check your utility’s current notices and annual water quality report for information about your address. For comparison with other states, see tap water safety by state.

What does the statewide record show?

EPA data retrieved on November 3, 2026, covers 460 Maryland community water systems serving a reported 5,531,909 people. Over the three-year period in the record, 6 systems serving 696 people had health-based violations.

The reported percentage is 0.0% when rounded, not literally zero. A health-based violation means a violation of a maximum contaminant level or a treatment technique requirement. EPA also identified 3 systems as serious violators and 4 systems with lead action-level exceedances; these are different record fields and should not be assumed to identify the same systems.

The statewide summary concerns community water systems, not every water source in Maryland. In particular, it does not tell a private well owner what is in their well water.

What do the largest Maryland water systems’ records show?

The table shows the largest systems in the dataset and their reported populations served. None is marked with a health-based violation flag in the three-year record, although several have other recorded violations. Each system name links to its EPA report.

Water systemPeople servedEPA record in the last 12 quarters
Washington Suburban Sanitary Commission1,900,0000 quarters with violations
City of Baltimore1,600,0005 quarters with violations; a current violation is listed for total trihalomethanes
Glen Burnie-Broadneck290,6060 quarters with violations
Howard County D.p.w. Distribution286,1580 quarters with violations
Harford County D.p.w.104,5671 quarter with a monitoring and reporting violation
City of Hagerstown92,2000 quarters with violations
Waldorf - Charles County DPW84,2963 quarters with monitoring and reporting violations
New Design - Frederick County74,9116 quarters with monitoring and reporting violations

Monitoring and reporting violations can mean missed or late tests or paperwork; they do not, by themselves, establish that water was contaminated. Harford’s record concerns monitoring and reporting for total haloacetic acids and total trihalomethanes, both disinfection byproducts. The Waldorf and New Design records concern monitoring and reporting for gross alpha radioactivity, excluding radon and uranium.

Baltimore’s record lists a maximum contaminant level violation as well as monitoring and reporting violations, even though its health-based violation flag says “No.” It lists nitrate and total trihalomethanes, a disinfection byproduct, among the contaminants associated with violations in the three-year record; total trihalomethanes is listed in a current violation. The entries alone do not explain the difference between the flag and the listed category, so consult the utility’s notices and annual report for details.

Can lead enter water from household plumbing?

Yes. A utility’s compliance record does not rule out lead entering water through a building’s service line, pipes, solder or fixtures. The only way to know about a particular tap is to have its water tested; see how to test water quality at home.

EPA’s lead action level is 15 parts per billion (ppb), while its health goal is zero. The action level is a trigger based on utility tap-sampling results, not a guarantee that an individual home’s water is free of lead.

Children and pregnant people should be especially careful about possible lead exposure. If you are concerned about exposure, ask a healthcare professional about appropriate testing or advice. Use cold water for drinking, cooking and preparing infant formula; boiling does not remove lead. If choosing a filter, check that the specific model is certified to reduce lead and maintain it as directed. Our guide to the best pitcher water filters can help you compare options.

How can you check your own utility?

Start with your water bill or ask your landlord which system serves the property. Then read that utility’s latest annual water quality report and check its current notices; a statewide summary cannot substitute for those local updates.

Compare the utility name or public water system ID with the EPA report, particularly if a similarly named county or city has more than one system. Ask the utility about any listed violation you do not understand. If there is a current drinking-water notice, follow its instructions about water use and alternatives.

If you use a private well, arrange testing for the well rather than relying on a community system’s report. A tap test may also be useful when you are concerned about plumbing inside a home served by a public system.

Where does the Maryland data come from?

The figures come from EPA’s Enforcement and Compliance History Online (ECHO), using Safe Drinking Water Act information from the Safe Drinking Water Information System. The records above were retrieved on November 3, 2026; the linked reports may change as EPA updates them.

The three-year flags and quarterly violation histories are a snapshot of reported compliance, not a test of every household tap. For current local details, use the utility’s notices and annual water quality report alongside the EPA record.

Frequently asked questions

Does clear water mean it is free of contaminants?

No. Some contaminants, including lead, cannot be identified by looking at the water. Testing is needed to find out what is present at a particular tap.

Can renters find out which water system serves their home?

Yes. Ask the landlord or property manager for the utility’s name, then request or look for its annual water quality report and current notices.

Does a monitoring violation prove that the water was contaminated?

No. A monitoring or reporting violation can reflect a missed or late test or paperwork; it does not by itself establish contamination.