Is Tap Water Safe to Drink in Maine?
Yes, for most residents, because EPA records show that 0.1% of people served by Maine community water systems were served by a system with a health-based violation in the last 3 years, and Portland Water District-Greater had no such violation.
That statewide figure is not a guarantee for every address. Your utility’s record, current notices and household plumbing all matter. For a broader comparison, see tap water safety by state.
What does Maine’s tap water record mean?
A health-based violation means a system violated a maximum contaminant level or a required treatment technique. The EPA record is a useful starting point, but it does not establish the quality of water at every tap or replace a current utility notice.
The figures below cover community water systems, not every water source in Maine. If you use a private well, the statewide utility record does not describe your well water.
How many Maine systems had health-based violations?
EPA data retrieved on November 3, 2026, covers 386 Maine community water systems serving 691,894 people. Four systems serving 926 people had health-based violations in the preceding 3 years. That represents 0.1% of the population served by the community systems in the record.
Most systems with violations were small. EPA also identified 7 systems as serious violators, a separate compliance designation that is not the same as the count of systems with health-based violations.
In addition, 21 systems had reported lead action-level exceedances during the 3-year period. An exceedance is important to investigate, but it should not be treated as proof that every home served by the system has elevated lead.
What do records show for Maine’s largest water systems?
None of the eight systems below had a health-based violation flag in the 3-year record. The table also shows other violations reported in the last 12 quarters; the links open each system’s EPA report.
| System | People served | EPA record |
|---|---|---|
| Portland Water District-Greater | 135,068 | No violations reported in 12 quarters |
| Maine Water Company Biddeford Saco Div | 42,508 | No violations reported in 12 quarters |
| Kennebunk, Kennebunkport & Wells WD | 35,663 | Monitoring/reporting and other violations in 6 quarters |
| Bangor Water District | 27,298 | Monitoring/reporting and other violations in 2 quarters |
| Lewiston Water & Sewer Division | 23,720 | No violations reported in 12 quarters |
| Kennebec Water District | 22,060 | Monitoring/reporting violations in 3 quarters |
| Maine Water Company Camden & Rockland | 21,315 | No violations reported in 12 quarters |
| Brunswick/topsham Water District | 18,863 | No violations reported in 12 quarters |
Monitoring and reporting violations mean tests or paperwork were missed or late; they do not by themselves mean the water was contaminated. The Kennebunk, Kennebunkport & Wells WD record lists rules involving toxaphene, diquat, endothall, total polychlorinated biphenyls and chlordane. Bangor Water District’s record lists the Surface Water Treatment Rule, while Kennebec Water District’s lists that rule and dalapon.
Those rule names do not establish that the named substances were found in the water. For details about the violations, including those categorized as other violations, consult each utility’s notices and annual water quality report.
Can lead come from household plumbing?
Yes. Lead can enter water through a home’s service line, pipes, solder or fixtures, so a clean utility record does not rule out lead at an individual tap. Testing the water at your home is the way to investigate that tap.
EPA’s lead action level is 15 parts per billion (ppb), or 0.015 milligrams per liter (mg/L); its health goal for lead is zero. The action level is assessed using samples from multiple taps and is not a safety guarantee for an individual result. EPA’s 2024 rule lowers the action level to 10 ppb, with compliance beginning in 2037.
If you choose a filter for lead, look for one certified to remove it and follow the manufacturer’s instructions for installation and replacement. Our guide to the best pitcher water filters can help you compare options. Boiling does not remove lead.
Infants, children and pregnant people are especially vulnerable to lead exposure. If a test finds lead, contact your health department and a healthcare professional for advice, particularly if a child or pregnant person drinks the water; ask whether testing for exposure is appropriate. Follow any utility or health-department notice about an alternative drinking-water source.
How can you check your own utility or well?
Find your water provider on your bill or ask your landlord. Request its latest annual water quality report and check for current notices; the statewide figures cannot tell you whether an advisory applies to your address.
Review the utility’s EPA report for its compliance history, then consider a home test if you have concerns about your plumbing. See how to test water quality at home for help choosing a test.
If you have a private well, contact your local health department or an accredited laboratory about testing for contaminants such as bacteria, arsenic and nitrate. A community water system’s report does not substitute for a well test.
Where does the Maine data come from?
These figures come from EPA’s Enforcement and Compliance History Online, or ECHO, using Safe Drinking Water Information System data retrieved on November 3, 2026. The linked facility reports contain the individual system records.
The 12-quarter counts summarize reported violations, while the health-based flag covers the preceding 3 years. The current quarter can be undetermined, and a historical record cannot establish conditions at your tap today. Check your utility’s latest notices and annual report for current information.
Frequently asked questions
Can water look and taste normal while containing lead?
Yes. Appearance and taste cannot reliably tell you whether water contains lead; a test is needed.
Do all eight of Maine’s largest listed systems use surface water?
No. Brunswick/topsham Water District uses groundwater; the other seven listed systems use surface water.
Is a monitoring violation the same as a health-based violation?
No. A monitoring or reporting violation concerns missed or late tests or paperwork. A health-based violation involves a maximum contaminant level or treatment technique.