Is Tap Water Safe to Drink in Madison?
Mostly yes, with caveats: the EPA-based verdict says Madison Water Utility had health-based violations in the last 3 years, with none open now. However, the EPA data’s health-based violation flag says “No,” which is a discrepancy with the verdict. Check Madison Water Utility’s current notices and annual water quality report for clarification and current details.
For a broader comparison, see tap water safety by state.
What does the safety verdict mean?
The verdict summarizes the public water system’s record: it indicates previous health-based violations but no open health-based violations now. The separate health-based violation flag conflicts with that summary, so readers should check the utility’s notices and report for clarification.
The record does not identify the specific contaminants or rules involved in the reported violations. It also does not test every household tap or establish the condition of a home’s plumbing.
Who supplies Madison’s water, and where does it come from?
Madison Water Utility supplies the main public water system covered by this record. The local-government-owned utility uses groundwater, and the EPA record lists a population served of 272,000 people.
The system is identified as WI1130224. Its record does not establish the quality of water from an individual private well.
What does the EPA violation record show?
The summary covers the last 3 years and lists violations in 5 of the last 12 quarters. A quarter with a violation is not necessarily a separate violation.
| System | People served | Health-based violations, last 3 years | Open violations | Lead action-level exceedances, last 3 years |
|---|---|---|---|---|
| Madison Water Utility | 272,000 | Verdict says yes; separate flag says no | Verdict says no health-based violations are open; total open violations are not specified | None reported |
The reported categories are “other violation” and “treatment technique violation.” A treatment technique violation concerns a required treatment procedure; these labels alone do not establish which contaminant, if any, was present in drinking water. Check the utility’s notices for the circumstances and current status.
What did PFAS testing find?
PFAS are a group of persistent chemicals often called “forever chemicals.” In EPA’s one-time UCMR 5 national survey, Madison Water Utility samples were collected from October 2, 2023, through October 8, 2024. The results are historical measurements, not a current reading from your tap.
| Substance | Detections | Maximum detected | Reporting limit | EPA limit |
|---|---|---|---|---|
| PFOA | 0 of 40 samples | Not detected | 4.0 ppt | 4.0 ppt |
| PFOS | 0 of 40 samples | Not detected | 4.0 ppt | 4.0 ppt |
| PFHxS | 4 of 40 samples | 7.3 ppt | 3.0 ppt | Not compared here |
EPA has set limits of 4.0 parts per trillion (ppt) for PFOA and PFOS. Neither was detected at the survey’s 4.0 ppt reporting limit, but “not detected” does not mean the concentration was necessarily zero. Compliance is based on running annual averages, so these survey results alone are not a compliance determination.
The data also group other PFAS results: 2 detections were reported among 920 samples, with a maximum of 46.5 ppt. That grouped maximum should not be compared with the PFOA or PFOS limits as though it were a result for either chemical.
What about lead and household plumbing?
No lead action-level exceedances were reported for the system in the last 3 years. That does not guarantee that every home is free of lead: water can pick up lead from service lines, plumbing or fixtures after leaving the utility’s system.
EPA’s current lead action level is 15 parts per billion (ppb), and its health goal is zero. A system-level result is not a guarantee about an individual tap. If you are concerned about your home, ask the utility about your service line and consider a tap-water test.
Infants and young children are especially vulnerable to lead exposure. If you suspect lead in water used for infant formula, use bottled water or water from a filter certified for lead reduction, and contact a pediatrician about exposure concerns. Pregnant people and anyone concerned about possible exposure can also ask a healthcare professional for advice.
Can you use the water for ice, brushing teeth and washing produce?
The EPA summary alone does not establish a need for special precautions for these uses throughout Madison. Conditions at an individual tap and any current utility advisory still matter.
If a notice advises against using tap water, follow its specific instructions for making ice, brushing teeth and washing produce. Check whether existing ice should also be avoided.
How can you get extra protection?
A test of your own tap can help answer a household-specific question that the utility record cannot. Our guide to how to test water quality at home explains how to approach sampling.
If you choose a filter, check that its certification specifically covers the contaminant you want to reduce. Look for NSF/ANSI 53 certification for lead reduction, or NSF/ANSI 53 or 58 certification that specifically lists PFOA and PFOS reduction; certification does not mean a filter removes every PFAS. Replace cartridges as the manufacturer directs, and follow any utility advisory even if you use a filter. See our guide to the best pitcher water filters for options.
Boiling does not remove lead or PFAS. Use an appropriately certified filter or another suitable water source if you need to reduce exposure to either.
Where does the information come from?
The violation and system information comes from EPA’s Safe Drinking Water Act data in the detailed facility report, retrieved November 3, 2026. The PFAS figures come from EPA’s UCMR 5 occurrence data, from a file dated October 15, 2026.
These sources are snapshots. Consult Madison Water Utility’s current notices and annual water quality report for updates and clarification of the conflicting health-based violation information.
Frequently asked questions
Does boiling water remove lead or PFAS?
No. Boiling does not remove lead or PFAS; use a filter certified for the contaminant or another appropriate water source instead.
What does “not detected” mean in the PFAS results?
It means the substance was not detected at the test’s reporting limit. It does not prove that the concentration was zero.
Does the Madison Water Utility record cover private wells?
No. The record describes the public water system, not water from an individual private well.