Is Tap Water Safe to Drink in Los Angeles?
Yes, Los Angeles-City, Dept. of Water & Power had no health-based drinking water violations reported in the last 3 years.
What does the Los Angeles tap water verdict mean?
The verdict reflects the EPA record for the main water system, not a test of every tap in Los Angeles. It also does not rule out a current local notice or contamination from a building’s own plumbing.
Check the utility’s current notices and annual water quality report for information relevant to your address. For a broader comparison, see tap water safety by state.
Who supplies Los Angeles water, and where does it come from?
Los Angeles-City, Dept. of Water & Power is a local-government utility whose primary water source is surface water. Its EPA system identification number is CA1910067.
The utility reports serving 3,875,566 people. That is a system service-population figure, not a measurement of the water at any particular address. Check your water bill or ask your property manager to confirm which supplier serves you.
What does the EPA violation record show?
The following snapshot covers the utility’s reported record for the last 3 years, retrieved on November 3, 2026. A health-based violation concerns a drinking water requirement intended to protect health; a monitoring or reporting violation instead concerns missed or late tests or reporting, not necessarily contaminated water.
| EPA record measure | Los Angeles-City, Dept. of Water & Power |
|---|---|
| Population served | 3,875,566 people |
| Health-based violations in the last 3 years | None reported |
| Open violations | None reported |
| Lead action-level exceedances in the last 3 years | None reported |
| Quarters with violations in the last 12 quarters | 0 of 12 reported |
The record also marks the current quarter as undetermined. That is not a confirmed violation, but it is not a completed clean result either. The snapshot does not replace current utility notices or the annual water quality report.
What did PFAS testing find?
PFAS are a group of persistent chemicals sometimes called “forever chemicals.” In EPA’s one-time UCMR 5 survey, Los Angeles-City, Dept. of Water & Power sampled between December 26, 2023, and September 11, 2024. EPA has set a limit of 4.0 parts per trillion (ppt) for each of PFOA and PFOS.
| Chemical | Detections | Reporting limit | EPA limit |
|---|---|---|---|
| PFOA | 0 of 16 samples | 4.0 ppt | 4.0 ppt |
| PFOS | 0 of 16 samples | 4.0 ppt | 4.0 ppt |
Neither chemical was detected at the reporting limit in those samples. “Not detected” does not mean the concentration was zero: the tests did not report levels below that limit. The results alone do not determine ongoing compliance, which is based on running annual averages.
PFHxS, PFNA, PFBS and HFPO-DA, also called GenX, were likewise not detected in the listed samples. The EPA UCMR 5 occurrence data are a historical survey, not a live reading at your tap.
Could lead come from household plumbing?
Lead can enter drinking water from a home’s service line, plumbing or fixtures. The absence of a reported system-wide lead action-level exceedance does not establish that an individual tap is lead-free.
EPA’s health goal for lead in drinking water is zero. Its lead action level is 15 parts per billion (ppb) in applicable system sampling; that action level should not be treated as a safe level for an individual tap.
Use cold tap water for drinking and cooking, and consider having your water tested if you are concerned about plumbing. Boiling water does not remove lead.
Who should be careful, and when should they seek advice?
Pregnant people and families with infants or young children should be especially attentive to possible lead exposure. If you suspect exposure or a test finds lead, contact a healthcare professional or your child’s pediatrician about whether a blood lead test is appropriate. Contact the utility or local health department for guidance about the water at your address.
Can you use the water for ice, brushing teeth and washing produce?
The EPA record alone gives no indication that these uses require avoidance for water from this utility. However, it cannot tell you whether an advisory currently affects your address or whether your plumbing contributes lead.
Check current notices before using tap water if there is an alert. Follow the notice’s specific instructions about boiling or using another water source; boiling is not a solution for lead.
How can you get extra protection?
A tap-water test can help answer questions that a utility-wide record cannot. Learn how to test water quality at home, and choose a test or laboratory appropriate for the contaminant you want to check.
If you use a filter, look for independent certification for the specific contaminant, such as NSF/ANSI 53 certification for lead reduction. Not every filter reduces lead or PFAS; check its certified claims and follow the manufacturer’s replacement instructions. Our guide to the best pitcher water filters explains options to compare.
Where does this information come from?
The violation snapshot comes from EPA’s Safe Drinking Water Act data in the utility’s EPA ECHO report, retrieved November 3, 2026. The PFAS results come from EPA UCMR 5 occurrence data in a file dated October 15, 2026.
EPA records and survey results are snapshots. For current information and details about your service area, consult the utility’s notices and annual water quality report.
Frequently asked questions
Does clear tap water mean it contains no lead?
No. Appearance alone cannot establish whether lead or other contaminants are present. Testing is needed to check for lead at a particular tap.
Can renters test their tap water?
Yes. Renters can arrange testing for the contaminants they are concerned about and share the results with their property manager. A laboratory can advise on collecting a sample correctly.