Is Tap Water Safe to Drink in Lansing?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Lansing Board of Water & Light has no health-based drinking water violations in the EPA record for the last three years.

That finding is reassuring, but it does not establish what is in the water at every tap or whether a temporary advisory is in effect. For a broader comparison, see tap water safety by state.

What does the EPA verdict mean for Lansing?

The EPA record shows no health-based violations for the Lansing Board of Water & Light during the last three years. It also lists no rules violated during that period.

The record covers the public water system, not the condition of pipes or fixtures inside an individual home. Check the utility’s current notices for any local instructions and its annual water quality report for the latest available water-quality details.

Who supplies Lansing’s water, and where does it come from?

The Lansing Board of Water & Light is the main water system identified for Lansing, Michigan. It is a local government-owned utility, and its primary water source is groundwater.

The system serves approximately 166,000 people. That is the population served by the water system, not a count of Lansing city residents alone.

What does the EPA violation record show?

The following summary is from the EPA drinking water record retrieved on November 3, 2026. The violation and lead-exceedance fields cover the last three years.

SystemPeople servedHealth-based violationsOpen violationsLead action-level exceedances
Lansing Board of Water & Light166,000None reportedNone reportedNone reported

EPA lists zero quarters with violations out of the last 12, although a quarter in the compliance history is marked undetermined. No copper action-level exceedances were reported in the three-year record either.

What did PFAS testing find in Lansing’s water?

PFAS are a group of chemicals often called “forever chemicals.” In EPA’s national UCMR 5 survey, the Lansing Board of Water & Light’s samples were collected from February 5 through August 8, 2024. The results below are from the EPA UCMR 5 occurrence data.

ChemicalResultsReporting limit
PFOANot detected in 4 samples4.0 parts per trillion (ppt)
PFOSNot detected in 4 samples4.0 ppt
PFNANot detected in 4 samples4.0 ppt
PFHxSNot detected in 4 samples3.0 ppt
HFPO-DA, also called GenXNot detected in 4 samples5.0 ppt
PFBSNot detected in 4 samples3.0 ppt

EPA has set limits of 4.0 ppt each for PFOA and PFOS. Neither was detected in these samples; their reporting limits were also 4.0 ppt. “Not detected” does not mean the concentration was necessarily zero.

These are historical survey results, not a continuous measurement at a home tap. They should not be treated as a standalone compliance determination, because compliance is based on running annual averages.

Could lead come from household plumbing?

Lead can enter drinking water from service lines, household plumbing or fixtures. A utility-wide record with no reported lead action-level exceedances does not guarantee that every home’s water is lead-free.

EPA’s lead health goal is zero, and the federal lead action level is 15 parts per billion (ppb). The action level is a system-wide trigger based on tap sampling, not a safety guarantee for an individual tap.

Use cold tap water for drinking, cooking and preparing infant formula, and follow formula preparation instructions. If water has been sitting in the plumbing, flush it before use. Boiling does not remove lead.

Can you use Lansing tap water for ice, brushing teeth and produce?

If no advisory applies and you have no unresolved household plumbing concern, tap water can be used to make ice, brush teeth and wash produce. Check the Lansing Board of Water & Light’s current notices before relying on the historical EPA record for these uses.

If an advisory is issued, follow its specific instructions. Different notices may give different directions for drinking, cooking and other household uses.

What if you want extra protection?

A home water test can help answer questions the utility record cannot, especially whether lead is present at your tap. See how to test water quality at home and ask the utility or a qualified laboratory about appropriate sampling.

For filtration, choose a product independently certified for the contaminant you want to reduce. Check for a specific lead-reduction claim under NSF/ANSI Standard 53, or a PFOA or PFOS reduction claim under NSF/ANSI Standard 53 or 58; certification alone does not mean a filter removes every contaminant. Our guide to the best pitcher water filters explains options.

If you are pregnant, have an infant or are immunocompromised, ask a healthcare professional about any special precautions. If you are concerned about possible lead exposure, contact a healthcare professional and ask the utility about testing and current information.

Where does this information come from?

The violation and system details come from the EPA ECHO drinking water report for the Lansing Board of Water & Light, retrieved November 3, 2026. PFAS results come from EPA’s UCMR 5 occurrence data file dated October 15, 2026.

These records are snapshots. For current notices and the latest annual water quality report, contact or check the Lansing Board of Water & Light directly.

Frequently asked questions

Does boiling water remove PFAS?

No. Boiling does not remove PFAS and can concentrate them as water evaporates.

Can you tell whether water contains lead by tasting it?

No. Lead in drinking water cannot reliably be detected by taste, smell or appearance; a water test is needed.

Do the Lansing utility’s PFAS results apply to private wells?

No. The reported results describe samples from the Lansing Board of Water & Light system, not individual private wells.