Is Tap Water Safe to Drink in Killeen?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the City of Killeen had no health-based drinking water violations in the EPA record for the last 3 years.

What does Killeen’s tap water safety record mean?

The EPA record shows no reported health-based violations for the City of Killeen during the last 3 years. It also lists no quarters with violations during the last 12 quarters, although a quarter is marked undetermined, which usually means the current quarter.

This is a record of the utility’s water system, not a guarantee about every home’s plumbing or current conditions. Check the City of Killeen’s notices and annual water quality report for current information. For a broader comparison, see tap water safety by state.

Who supplies Killeen’s water, and where does it come from?

The City of Killeen is the local-government-owned water utility listed in EPA records. Its primary source is purchased surface water. The system’s public water system ID is TX0140006.

What does EPA’s 3-year violation record show?

EPA record itemCity of Killeen
People served161,027
Health-based violations in the last 3 yearsNone reported
Current contaminant or rule violationsNone reported
Lead action-level exceedances in the last 3 yearsNone reported
Quarters with violations in the last 12 quarters0

The record also lists no rules violated in the last 3 years. A monitoring or reporting violation, when one occurs, means a required test or report was missed or late; it does not by itself establish that water was contaminated.

The absence of a reported lead action-level exceedance does not establish that every home is free of lead. Individual service lines, plumbing and fixtures can affect water after it leaves the utility’s system.

What did PFAS testing find in Killeen?

PFAS are a group of long-lasting chemicals often called “forever chemicals.” EPA’s fifth Unregulated Contaminant Monitoring Rule survey, or UCMR 5, tested selected drinking water systems nationally during 2023–2025. Killeen’s reported sampling period ran from March 3 to December 1, 2025.

SubstanceDetectionsReporting limitHighest reported detection
PFOA0 of 8 samples4.0 parts per trillion (ppt)None
PFOS0 of 8 samples4.0 pptNone
PFBS1 of 8 samples3.0 ppt3.0 ppt
PFNA0 of 8 samples4.0 pptNone
PFHxS0 of 8 samples3.0 pptNone
HFPO-DA, also called GenX0 of 8 samples5.0 pptNone

The data also group other PFAS results: 7 detections among 184 reported sample results, with a maximum of 7.3 ppt. That maximum is not a PFOA or PFOS result and should not be compared with their individual limits.

EPA has set limits of 4.0 ppt each for PFOA and PFOS. Neither was detected in Killeen’s reported samples at the 4.0 ppt reporting limit. “Not detected” does not mean the concentration was necessarily zero, and these survey results alone do not establish regulatory compliance, which is based on running annual averages.

Can lead enter water from household plumbing?

Yes. Lead can enter drinking water from a home’s service line, pipes or fixtures even when the utility’s record shows no lead action-level exceedances. A home water test is the way to assess lead at a particular tap.

EPA’s lead action level is 15 parts per billion (ppb), or 0.015 milligrams per liter (mg/L); its health goal is zero. An action level is not a guarantee that a lower lead concentration is risk-free.

Use cold water for drinking and cooking, and run the cold tap before use if water has been sitting in the plumbing. Boiling does not remove lead. If you are concerned about possible lead exposure, especially during pregnancy or for a child, ask a healthcare professional whether testing is appropriate.

Can you use Killeen tap water for ice, brushing teeth and washing produce?

The EPA record does not identify a health-based violation that would require avoiding these everyday uses. Before using tap water for ice, brushing teeth or washing produce, check for any current City of Killeen notice and follow its instructions; a local advisory may call for boiled or bottled water.

People with weakened immune systems should ask a healthcare professional whether they need additional water precautions. The utility’s record cannot account for a particular home’s plumbing.

How can you get extra protection?

A home test can help identify a plumbing-specific concern, such as lead. Choose a qualified laboratory and ask for its sampling instructions: a sample collected immediately after water has sat in the pipes can answer a different question from one collected after flushing. See how to test water quality at home.

If you choose a filter, check that its certification specifically covers the contaminant you want to reduce, such as lead or PFOA and PFOS. Follow the manufacturer’s installation and cartridge-replacement instructions. Our guide to the best pitcher water filters explains filter options.

Where does this information come from?

The violation and system details come from the EPA ECHO drinking water report for the City of Killeen, retrieved November 3, 2026. The PFAS results come from EPA’s UCMR 5 occurrence data, using the file dated October 15, 2026.

These records are snapshots, not substitutes for current utility notices or the City of Killeen’s annual water quality report.

Frequently asked questions

Can you tell whether tap water contains lead by tasting it?

No. Lead cannot reliably be detected by taste, sight or smell; testing is needed to assess it at your tap.

Does the UCMR 5 survey test for every possible PFAS?

No. UCMR 5 monitored selected PFAS, so its results do not describe every chemical in the broader PFAS group.