Is Tap Water Safe to Drink in Gilbert?
Yes, the Town of Gilbert had no health-based drinking water violations in EPA’s last three years of records, though it had monitoring and reporting violations that are not proof of unsafe water.
What does Gilbert’s EPA record mean?
The record distinguishes health-based violations from monitoring and reporting violations. The latter concern missed or late tests or paperwork; they do not, by themselves, establish that the water was contaminated.
The record also cannot guarantee the quality of water at every tap or account for a home’s plumbing. For a broader comparison, see tap water safety by state.
Who supplies Gilbert’s water, and where does it come from?
The EPA record identifies the supplier as Gilbert, Town of, a local government-owned water system. Its primary source is surface water, and the system is listed as serving 247,600 people.
This record applies to that utility, not necessarily every address in Gilbert. Check your water bill or contact the utility if you are unsure which system supplies your home.
What violations appear in the last three years?
| EPA record item | Gilbert, Town of |
|---|---|
| People served | 247,600 people |
| Health-based violations in the last three years | No |
| Open violation subjects | Arsenic; bromate; Lead and Copper Rule; Revised Total Coliform Rule |
| Lead action-level exceedances in the last three years | None reported |
EPA lists violations in 11 of the last 12 quarters. The listed violation categories are monitoring and reporting or reporting violations. The open subjects include two substances—arsenic and bromate—and two drinking water rules covering lead and copper and coliform bacteria.
An open entry under a substance or rule does not, on its own, mean that substance was detected above a health limit. Consult the utility’s current notices and annual water quality report for details about the entries and present conditions.
What did PFAS testing find?
EPA’s fifth Unregulated Contaminant Monitoring Rule survey, known as UCMR 5, looked for PFAS, sometimes called “forever chemicals.” Gilbert’s samples were collected from November 2023 to November 2024. The results include the following:
| Substance | Samples with detections | Highest reported result |
|---|---|---|
| PFOA | 1 of 42 | 6.5 ppt |
| PFOS | 2 of 42 | 9.8 ppt |
| PFBS | 7 of 42 | 18.1 ppt |
| PFNA | 0 of 42 | Not detected |
| PFHxS | 0 of 42 | Not detected |
| HFPO-DA, or GenX | 0 of 42 | Not detected |
| Other PFAS, grouped | 5 of 966 | 6.2 ppt |
A result of “not detected” means the substance was below the test’s reporting limit, not necessarily absent. EPA has set limits of 4.0 parts per trillion (ppt) each for PFOA and PFOS. Gilbert’s highest individual results for both were above those numbers, but an individual maximum does not establish a violation: compliance is based on running annual averages.
UCMR 5 is a one-time national survey, not a substitute for current utility information. Its results are available in EPA’s UCMR 5 occurrence data.
Could lead come from household plumbing?
Yes. Even when a utility has no reported lead action-level exceedance, lead can enter water from plumbing or fixtures in a particular building. The system-wide record does not tell you the lead level at your own tap.
EPA’s lead health goal is zero. Its current action level of 15 parts per billion (ppb) is a trigger for system action, not a guarantee that an individual tap is free of lead. Use cold tap water for drinking and cooking, and consider a laboratory test if you are concerned about your plumbing. Boiling does not remove lead.
Can you use the water for ice, brushing teeth and washing produce?
The EPA record does not establish a reason to avoid these everyday uses, but it cannot rule out a household plumbing issue or a current local notice. Water used for ice should be suitable for drinking.
If the utility or health authorities issue a notice, follow its specific instructions for drinking, ice, brushing teeth and food preparation. Boiling does not remove lead or PFAS.
How can you get extra protection?
A home test can help answer questions the utility-wide record cannot, particularly about lead from household plumbing. Use an appropriately certified laboratory and ask which sampling instructions and tests fit your concern; our guide explains how to test water quality at home.
If you choose a filter, look for independent certification for the specific contaminants you want to reduce, and follow the manufacturer’s replacement instructions. Not every filter removes lead or PFAS, and a certification claim should be checked against the product’s stated reduction performance. Compare options in our guide to the best pitcher water filters.
Pregnant people, families preparing infant formula and people with concerns about a child’s exposure can discuss their circumstances with a doctor. If you are concerned about lead or PFAS at your tap, consider appropriately tested bottled water or a filter certified to reduce the contaminant of concern while you seek advice. Contact a doctor promptly if you suspect an exposure or someone is unwell; do not rely on a water-quality record to diagnose symptoms.
Where does the information come from?
The violation and system information comes from EPA’s Safe Drinking Water Act data in the Gilbert detailed facility report, retrieved November 3, 2026. The PFAS figures come from EPA’s UCMR 5 occurrence data, in a file dated October 15, 2026.
Records can change, and survey results describe the samples collected rather than every home. Check Gilbert’s current utility notices and annual water quality report for the latest details.
Frequently asked questions
Does the Gilbert utility record cover private wells?
No. The EPA record describes the Gilbert public water system, not water drawn from a private well. A private well needs its own water-quality assessment.
Can you detect PFAS by tasting Gilbert tap water?
Taste is not a reliable test for PFAS. An appropriate laboratory test is needed to measure them.
Is the population served the same as Gilbert’s census population?
No. EPA lists 247,600 people served by the utility, while Gilbert’s 2023 census population is listed as 275,411 people. The figures describe different measures.