Is Tap Water Safe to Drink in Fort Worth?
Yes, the City of Fort Worth’s EPA record shows no health-based drinking water violations in the last 3 years, although it does show a reporting violation that is not proof of contaminated water. For comparisons elsewhere, see tap water safety by state.
What does the Fort Worth tap water verdict mean?
The EPA record shows no health-based violations for the City of Fort Worth water system during the last 3 years. It does list a reporting violation. Reporting and monitoring violations concern missed or late tests or paperwork; they do not, by themselves, establish that water was contaminated.
The record is not a guarantee about every tap. PFAS was detected in a separate round of testing, and a home’s plumbing can affect water after it leaves the utility’s system. Check current utility notices as well as the historical record.
Who supplies Fort Worth’s water, and where does it come from?
The City of Fort Worth is the local-government utility listed in EPA’s records as CITY OF FORT WORTH. Its public water system identification number is TX2200012, and its primary source is surface water.
EPA lists the system as serving 955,900 people. That is a water-system figure, not a count of every resident within Fort Worth’s city limits.
What does the EPA violation record show for the last 3 years?
| Record item | City of Fort Worth system |
|---|---|
| People served | 955,900 |
| Health-based violations | None recorded |
| Violation category | Reporting violation |
| Quarters with violations | 3 of the last 12 quarters |
| Open violations | Not specified in the record |
| Lead action-level exceedances | None reported |
A lead action-level exceedance is a result used in assessing a system’s lead-control requirements. None reported for the system does not mean every home is free of lead in its plumbing.
The record does not specify the details behind the reporting violation. For current information, consult the City of Fort Worth’s public notices and annual water quality report.
What did PFAS testing find?
PFAS are a group of persistent chemicals sometimes called “forever chemicals.” EPA’s fifth Unregulated Contaminant Monitoring Rule, or UCMR 5, was a national survey conducted from 2023 through 2025. Fort Worth’s listed samples were collected from January 23, 2023, to January 24, 2024.
| PFAS | Samples with detections | Highest result | EPA limit |
|---|---|---|---|
| PFOA | 8 of 20 | 8.3 ppt | 4.0 ppt |
| PFOS | 8 of 20 | 7.3 ppt | 4.0 ppt |
| PFHxS | 8 of 20 | 25.8 ppt | Not compared here |
| PFBS | 10 of 20 | 4.9 ppt | Not compared here |
Ppt means parts per trillion. The highest PFOA and PFOS results were above the respective 4.0 ppt limits EPA has set. However, a maximum individual result alone does not establish a violation: compliance is based on running annual averages.
PFNA and GenX were not detected in their 20 samples each. “Not detected” means a result was below the reporting limit, not necessarily that the chemical was absent. These historical survey results do not establish current PFAS levels at a particular tap. See the EPA UCMR 5 occurrence data and the utility’s current reports for more information.
Can household plumbing add lead to tap water?
Yes. Lead can enter water from a home’s service line, pipes, solder or fixtures, so the utility’s record cannot rule out exposure at an individual tap. EPA’s lead health goal is zero, and its current action level is 15 parts per billion; the action level is used to assess results across a system, not to certify an individual home’s water.
Use cold water for drinking and cooking. If water has been sitting in the plumbing, run the cold tap before using it and ask the utility for specific flushing advice. Boiling does not remove lead or PFAS.
Who should be careful?
Pregnant people and families with infants or young children should pay particular attention to possible lead exposure. If you are concerned about lead or PFAS, especially when preparing infant formula, ask a clinician or pediatrician for advice; they can discuss whether testing is appropriate. Consult a clinician if you think you or your child may have been exposed.
Can you use tap water for ice, brushing teeth and washing produce?
The historical EPA record does not identify a health-based violation requiring residents to avoid these everyday uses. It cannot confirm whether a current advisory applies, so check the utility’s latest notices.
If an advisory or a household test calls for alternative water, follow the instructions that apply to your address. If you choose filtered water because of lead or PFAS concerns, use it for drinking and making ice as well.
How can you get extra protection?
A household test can help identify a problem that a system-wide record cannot resolve. Our guide to how to test water quality at home explains how to approach testing; ask the utility or a qualified laboratory about the right test and sampling instructions for your concern.
For filtration, choose a product certified for the specific contaminant you want to reduce. Look for a lead-reduction claim under NSF/ANSI 53, or a specific PFOA or PFOS reduction claim under NSF/ANSI 53 or 58. A PFAS reduction claim does not necessarily mean the filter will reduce water to 4.0 ppt. Replace cartridges as directed and compare options in our guide to the best pitcher water filters.
Where does this information come from?
The violation and system details come from the EPA ECHO detailed facility report, retrieved November 3, 2026. The PFAS figures come from EPA’s UCMR 5 occurrence data file dated October 15, 2026.
These sources describe recorded system history and survey samples, not a live test of your tap. For current notices and annual results, check with the City of Fort Worth.
Frequently asked questions
What does a part per trillion mean?
A part per trillion describes one part of a substance in one trillion parts. In water testing, ppt is used to report very small concentrations.
Why is the utility’s population served different from the city’s population?
The population served is EPA’s figure for the water system; the city population is a census estimate of Fort Worth residents. They are different measures and may refer to different areas and dates.