Is Tap Water Safe to Drink in Des Moines?
Yes, Des Moines Water Works had no health-based drinking water violations in the last 3 years in the EPA record. The record covers the utility’s system, not every home’s plumbing; see our guide to tap water safety by state for a broader comparison.
What does the Des Moines tap water verdict mean?
The EPA record reports no health-based violations for Des Moines Water Works over the last 3 years. It also reports no violations in the last 12 quarters, although the most recent quarter’s status is listed as undetermined.
That is a useful compliance snapshot, not a test result from your kitchen tap or a guarantee about current conditions. Check Des Moines Water Works’ current notices and annual water quality report for the latest local information.
Who supplies Des Moines water, and where does it come from?
Des Moines Water Works is the main system in the EPA record. Its recorded primary source is purchased surface water, and it is owned by local government.
The system is listed as serving 246,055 people. That is the population served by the system, not necessarily the population within Des Moines city limits.
What does the EPA violation record show for the last 3 years?
The following snapshot is for Des Moines Water Works, system ID IA7727031. A health-based violation is different from a monitoring or reporting violation, which concerns missed or late tests or paperwork and does not itself establish that water was contaminated.
| EPA record measure | Des Moines Water Works |
|---|---|
| People served | 246,055 |
| Health-based violations in the last 3 years | None reported |
| Open violations | None reported |
| Lead action-level exceedances in the last 3 years | None reported |
| Quarters with violations in the last 12 quarters | 0 |
No lead action-level exceedances reported does not mean every home tested free of lead. The latest quarter is marked undetermined, so the record should not be treated as a completed assessment of that quarter.
What did PFAS testing find?
EPA’s fifth Unregulated Contaminant Monitoring Rule survey, known as UCMR 5, tested for PFAS, sometimes called forever chemicals. For Des Moines Water Works, the recorded samples were collected from February 14 through November 14, 2023.
| Chemical | Samples with a detection | Reporting limit | EPA limit |
|---|---|---|---|
| PFOA | 0 of 12 | 4.0 parts per trillion (ppt) | 4.0 ppt |
| PFOS | 0 of 12 | 4.0 ppt | 4.0 ppt |
Neither PFOA nor PFOS was detected above its reporting limit in those samples. A non-detection does not mean the concentration was necessarily zero; it means a result below the reporting limit was not reported as a detection.
PFBS, PFHxS, PFNA and HFPO-DA, also known as GenX, were not detected in the 12 samples reported for each chemical. The survey offers a historical snapshot rather than a current tap test. EPA has set limits of 4.0 ppt for PFOA and PFOS, but compliance is based on running annual averages, so these survey results alone do not establish compliance.
Can lead get into water from household plumbing?
Lead can enter water from a service line, household plumbing or fixtures. The utility’s record of no reported lead action-level exceedances does not rule out lead at an individual address.
EPA’s lead action level is 15 parts per billion (ppb), and its health goal is zero. The action level is used in a system’s lead monitoring program; it is not a guarantee that an individual tap has no lead.
Use cold tap water for drinking, cooking and preparing infant formula. Boiling does not remove lead. If you are concerned about your plumbing, ask the utility about your service line and arrange a lead test at the tap.
Pregnant people, families with young children and anyone concerned about possible lead exposure should contact a healthcare professional for advice. A healthcare professional can advise whether a child needs a blood lead test; do not rely on water’s taste or appearance to rule out lead.
Can you use the tap water for ice, brushing teeth and washing produce?
The EPA record gives no indication of a health-based violation in the last 3 years, but it does not assess your individual plumbing. In the absence of a current local advisory or a known household plumbing concern, the record does not identify a reason to avoid using the water for ice, brushing teeth or washing produce.
If the utility issues an advisory, follow its instructions for those uses. If you have a lead concern at home, use water from a source recommended by the utility or local health department, or use a filter certified for lead reduction as directed.
How can you get extra protection?
A tap test can help identify a problem specific to your home. Ask the utility or a qualified laboratory about sampling instructions and which contaminants to test for; our guide explains how to test water quality at home.
If you choose a filter, check that the particular model is independently certified to reduce the contaminant you are concerned about. For example, look for a specific lead-reduction claim under NSF/ANSI Standard 53; for PFOA or PFOS, check the model’s specific certified reduction claims rather than assuming every filter removes them.
Follow the manufacturer’s installation and replacement instructions. Our guide to the best pitcher water filters can help you compare options, but a pitcher is not a substitute for checking a current utility advisory.
Where does the data come from?
The violation and system information comes from the EPA ECHO drinking water facility report, retrieved November 3, 2026. The report uses EPA Safe Drinking Water Act data and may not describe conditions inside a particular building.
The PFAS results come from EPA’s UCMR 5 occurrence data, from a file dated October 15, 2026. For current details, consult Des Moines Water Works’ notices and annual water quality report.
Frequently asked questions
Can you taste or see lead in tap water?
No. Lead cannot be reliably identified by the taste, smell or appearance of water; testing is the way to check a particular tap.
What can renters do if they are concerned about lead?
Ask the property manager about the building’s plumbing and contact Des Moines Water Works about the service line. A qualified laboratory can explain how to collect a tap sample for lead testing.