Is Tap Water Safe to Drink in Denton?
Yes, the City of Denton’s EPA record shows no health-based drinking water violations in the last 3 years.
What does Denton’s tap water safety record mean?
The EPA record is a favorable result for the City of Denton’s public water system, but it is not a guarantee about every home’s tap. Water can also pick up lead from household plumbing, and the record does not replace current utility notices.
Check the City of Denton’s notices and annual water quality report for the latest information. For comparisons beyond Denton, see our guide to tap water safety by state.
Who supplies Denton’s water, and where does it come from?
The main system in the EPA record is operated by the City of Denton, a local-government utility. Its public water system identification number is TX0610002, and its primary source is surface water.
The system serves an estimated 150,037 people. The EPA findings below apply to that system; they do not establish the quality of water from a private well or a different public system serving an address in or near Denton.
What does the EPA violation record show?
The record retrieved on November 3, 2026, reports no health-based violations and no rules violated during the preceding 3 years. It does not list any current violations or lead action-level exceedances for that period.
| City of Denton system | EPA record |
|---|---|
| People served | 150,037 |
| Health-based violations in the last 3 years | None reported |
| Open violations | None listed |
| Lead action-level exceedances in the last 3 years | None reported |
The compliance history also marks a quarter as undetermined, so not every quarter has a final status. A monitoring or reporting violation, if one is listed in a future record, means a test or paperwork was missed or late; it does not by itself establish that the water was contaminated.
What did PFAS testing find in Denton?
EPA’s fifth Unregulated Contaminant Monitoring Rule survey, known as UCMR 5, collected national drinking water data during 2023–2025. The City of Denton’s listed samples were collected from January 23 through October 23, 2023.
| Substance | Denton UCMR 5 result | EPA limit for comparison |
|---|---|---|
| PFOA | Not detected in 8 samples; reporting limit 4.0 parts per trillion (ppt) | 4.0 ppt |
| PFOS | Not detected in 8 samples; reporting limit 4.0 ppt | 4.0 ppt |
| PFBS | Detected in 3 of 8 samples; maximum 4.7 ppt | Not a PFOA or PFOS result |
“Not detected” means the result was below the test’s reporting limit; it does not prove the amount was zero. EPA has set limits of 4.0 ppt for PFOA and PFOS. The survey results are historical measurements, not a current reading or a compliance determination: compliance is based on running annual averages.
A category labeled “any other PFAS” recorded 15 detections among 184 results, with a maximum of 8.9 ppt. That grouped result should not be compared with the individual PFOA and PFOS limits as though it were a measurement of either substance. See EPA’s UCMR 5 occurrence data for the survey source.
Could lead come from household plumbing?
Yes. Even when the utility has no reported lead action-level exceedances, lead can enter water through a building’s own plumbing or fixtures. The utility record cannot tell you the lead level at your individual tap.
EPA’s lead health goal is zero. Its current action level is 15 parts per billion (ppb), a level used to trigger utility action rather than a guarantee that an individual sample below it poses no risk. Use cold tap water for drinking and cooking, and consider a household lead test if you are concerned. Boiling does not remove lead.
Can you use Denton tap water for ice, brushing teeth and produce?
In the absence of a current notice restricting use, the City of Denton’s record does not indicate a general restriction on using its tap water for ice, brushing teeth or washing produce. Check utility notices before relying on that guidance, particularly if there is a service disruption.
If a notice is issued, follow its instructions for each use. Freezing does not reliably remove contaminants, and boiling should not be assumed to remove chemical contaminants such as lead or PFAS.
What if you want extra protection?
A test of water from your own tap can address questions the utility record cannot. Ask an appropriately certified laboratory about lead testing and follow its sampling instructions; our guide explains how to test water quality at home.
If you choose a filter, look for independent certification to reduce the specific contaminant you are concerned about, and follow the manufacturer’s replacement instructions. NSF/ANSI 53 or 58 certifications may apply, depending on the filter and contaminant. Check the product’s specific reduction claims rather than assuming every filter removes lead or PFAS; compare options in our guide to the best pitcher water filters.
People who are pregnant, families with infants or young children, and people with weakened immune systems may want individualized advice from a clinician. Contact a clinician if you suspect lead exposure or develop an illness you think may be related to your water; seek urgent care for severe dehydration or bloody diarrhea.
Where does the Denton water data come from?
The violation and system details come from EPA’s Safe Drinking Water Act data in the City of Denton EPA facility report, retrieved November 3, 2026. PFAS figures come from EPA’s UCMR 5 occurrence data file dated October 15, 2026.
Records can change after retrieval. For current notices and more recent testing details, consult the City of Denton’s utility notices and annual water quality report or contact the utility.
Frequently asked questions
Does the City of Denton’s EPA record cover private wells?
No. The record describes the City of Denton public water system, not an individual private well.
Does clear tap water mean it is free of contaminants?
No. Some contaminants cannot be seen, smelled or tasted. Testing is needed to assess specific concerns.