Is Tap Water Safe to Drink in Clarksville?
Yes, the Clarksville Water Department had no reported health-based drinking water violations in the last 3 years.
What does the EPA verdict mean for Clarksville tap water?
The EPA record indicates that the utility had no health-based violations during the period reviewed. It does not guarantee that every tap is free of contaminants: water can pick up lead from plumbing after it leaves the utility’s system.
A health-based violation differs from a monitoring or reporting violation, which concerns missed or late tests or paperwork and does not by itself establish that water is contaminated. For a broader comparison, see tap water safety by state.
Who supplies Clarksville’s water, and where does it come from?
The Clarksville Water Department is a locally owned public water system that uses surface water. EPA records list its public water system ID as TN0000116 and its population served as 251,864.
Surface water comes from above-ground sources rather than groundwater wells. The record does not identify a specific source water body. Check your water bill if you are unsure whether the Clarksville Water Department supplies your address.
What does the EPA violation record show for the last 3 years?
The following summary covers the Clarksville Water Department’s EPA record, not individual household plumbing. The record was retrieved on November 3, 2026.
| Measure | Clarksville Water Department record |
|---|---|
| Population served | 251,864 |
| Health-based violations in the last 3 years | None reported |
| Quarters with violations in the last 12 quarters | 0 reported |
| Current violations | None listed |
| Lead action-level exceedances in the last 3 years | None reported |
The compliance history marks the most recent quarter as undetermined, so the record should not be treated as a substitute for current utility notices. An absent lead action-level exceedance also does not mean every home’s tap has been tested or is lead-free.
What did PFAS testing find?
PFAS are a group of persistent chemicals often called “forever chemicals.” In EPA’s one-time UCMR 5 national survey, the Clarksville Water Department’s samples were collected from January 21 to September 10, 2025.
| PFAS | Samples with a reported detection | Reporting limit | EPA limit |
|---|---|---|---|
| PFOA | 0 of 3 | 4.0 parts per trillion (ppt) | 4.0 ppt |
| PFOS | 0 of 3 | 4.0 ppt | 4.0 ppt |
Neither PFOA nor PFOS was detected at its reporting limit in those samples. EPA has set a limit of 4.0 ppt for each chemical, but a non-detection is not proof that the concentration is zero. These survey results alone also do not establish regulatory compliance, which is based on running annual averages.
The utility also reported no detections in its three samples each for HFPO-DA (GenX), PFHxS, PFBS and PFNA. The results are available in EPA’s UCMR 5 occurrence data; the data file is dated October 15, 2026.
Could lead come from household plumbing?
Lead can enter drinking water through lead-containing service lines, fixtures or plumbing. A utility-wide record cannot tell you the lead level at your own tap, and lead cannot be reliably identified by how water looks, smells or tastes.
EPA’s lead action level is 15 parts per billion (ppb), or 0.015 milligrams per liter (mg/L); its health goal is zero. EPA’s 2024 Lead and Copper Rule Improvements lower the action level to 10 ppb, with compliance from 2037. An action level is not a guarantee that water below it is risk-free.
If lead is a concern, use cold tap water for drinking, cooking and preparing infant formula. Use water from a tested safe source or a filter certified to reduce lead; boiling does not remove lead. Pregnant people and young children are particularly vulnerable to lead exposure. If you suspect exposure, contact a health care professional, who can advise whether testing is appropriate.
Can you use the tap water for ice, brushing teeth and washing produce?
The EPA record does not identify a reason to avoid using Clarksville Water Department tap water for these activities. That record does not rule out a problem in your own plumbing or a current local advisory.
If you have a household lead concern, use water from a tested safe source or a filter certified to reduce lead for ice, brushing teeth and rinsing produce. Check utility notices for any current advisory and follow its instructions.
How can you get extra protection?
A test of your own tap is the way to learn about conditions in your household plumbing. Ask a certified drinking-water laboratory about a lead test and follow its sample-collection instructions; our guide explains how to test water quality at home.
If you choose a filter, check its independent certification and the specific contaminants it is certified to reduce. NSF/ANSI standards 53 and 58 cover products with certain contaminant-reduction claims, but not every certified filter removes lead, PFOA and PFOS. Replace cartridges as directed. Our guide to the best pitcher water filters can help you compare options.
Where does this information come from?
The violation and system details come from EPA’s Safe Drinking Water Act data in the Clarksville Water Department facility report, retrieved November 3, 2026. The PFAS results come from EPA’s UCMR 5 occurrence data.
These sources describe the utility and the samples or reporting periods shown, not every household tap or a live assessment of current conditions. Consult the Clarksville Water Department’s current notices and annual water quality report for the latest local details.
Frequently asked questions
What does parts per trillion mean?
Parts per trillion, abbreviated ppt, describes a very small concentration: one part of a substance per trillion parts of water.
Is the population served the same as Clarksville’s city population?
No. EPA lists 251,864 people served by the Clarksville Water Department; Clarksville’s 2023 census population was 180,716.