Is Tap Water Safe to Drink in Cedar Rapids?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the Cedar Rapids Water Department has no reported health-based drinking water violations in the last 3 years. That EPA record covers the utility’s water system, not every home’s plumbing. For a broader comparison, see tap water safety by state.

What does the EPA verdict mean for Cedar Rapids tap water?

The EPA record shows no health-based violations for the Cedar Rapids Water Department during the 3 years covered by the retrieved data. It also reports no rules violated during that period, although a quarter in the compliance history is marked undetermined.

The record is not a test of the water at your individual faucet or a guarantee of future conditions. Check the utility’s current notices and annual water quality report for information that may have changed since the EPA data was retrieved.

Who supplies Cedar Rapids water, and where does it come from?

The Cedar Rapids Water Department is the local-government utility listed in EPA records for Cedar Rapids. Its public water system identification number is IA5715093, and the record lists a population served of 142,364.

EPA describes the system’s primary source as groundwater under the influence of surface water. The utility’s annual water quality report is a place to check for more detail about the water it supplies and its recent testing.

What does the EPA violation record show?

The table summarizes the Cedar Rapids Water Department record for the last 3 years, retrieved November 3, 2026. An open violation is one listed as current in the record; a lead action-level exceedance is a separate measure from a health-based violation.

MeasureEPA record
People served142,364
Health-based violationsNone reported
Open violationsNone reported
Lead action-level exceedancesNone reported

The record lists zero rules violated during that period. An undetermined quarter is not the same as a confirmed violation-free quarter, so consult the utility’s notices for current information.

What did PFAS testing find in Cedar Rapids water?

PFAS are a group of chemicals sometimes called “forever chemicals.” EPA’s fifth Unregulated Contaminant Monitoring Rule, or UCMR 5, was a national survey conducted from 2023 to 2025. For the Cedar Rapids Water Department, the listed sampling dates were January 17 through October 16, 2023.

ChemicalSamples testedDetectionsReporting limitEPA limit
PFOA804.0 parts per trillion (ppt)4.0 ppt
PFOS804.0 ppt4.0 ppt

Neither chemical was detected at its reporting limit, so there was no detected maximum to compare with the limits. A non-detection does not mean the concentration was zero, and these results do not establish concentrations at every other time. EPA evaluates compliance using running annual averages rather than a single sample.

The survey also reported no detections for the other listed PFAS. These results describe the utility samples in the survey, not a separate test at every household tap.

Could lead in household plumbing affect the water?

Yes. Lead can enter water from a service line, plumbing solder or fixtures, so the utility’s record cannot rule out lead at a particular tap. No lead action-level exceedances were reported for the system in the last 3 years, but that does not mean every home is lead-free.

EPA’s lead health goal is zero, and its current action level is 15 parts per billion (ppb). Use cold tap water for drinking and cooking, and consider having your tap water tested if you are concerned about your plumbing. Boiling does not remove lead.

Pregnant people, infants and young children are especially vulnerable to lead exposure. If you are preparing infant formula, are pregnant, or have concerns about a child’s exposure, discuss testing and water choices with a health professional. People with weakened immune systems should also discuss relevant water concerns or advisories with their clinician.

Can you use Cedar Rapids tap water for ice, brushing teeth and washing produce?

The EPA record supports the same general verdict for these uses as for drinking water, but it does not assess an individual home’s pipes. Ice made from tap water uses that same water, and brushing teeth and washing produce also bring water into contact with food or the mouth.

If the utility issues an advisory, follow its specific instructions for these activities. When in doubt about an advisory or household plumbing, contact the utility for guidance.

How can you get extra protection?

A certified laboratory test can answer questions about your own tap that a system-wide record cannot. Start with the contaminants you are concerned about, such as lead, and follow the laboratory’s collection instructions; see how to test water quality at home.

If you choose a filter, look for independent certification to reduce the specific contaminant you want to address, and follow the manufacturer’s replacement instructions. Certification varies by model and contaminant; a general certification does not mean a filter removes every substance. Our guide to the best pitcher water filters explains options to compare.

Where does the Cedar Rapids water data come from?

The violation and system information comes from EPA’s Safe Drinking Water Act data in the Cedar Rapids Water Department facility report, retrieved November 3, 2026. The PFAS results come from EPA UCMR 5 occurrence data in a file dated October 15, 2026.

These records are snapshots, not live measurements at your faucet. For the latest local information, check the Cedar Rapids Water Department’s notices and annual water quality report.

Frequently asked questions

Does the Cedar Rapids utility record cover a private well?

No. The EPA record concerns the Cedar Rapids Water Department’s public water system, not an individual private well. Well owners need information and testing specific to their own water.

Can water’s appearance tell you whether it is safe?

No. Water can look clear and still contain contaminants that are not visible. Testing is needed to check for a particular contaminant.

What does a part per trillion mean in a water test?

A part per trillion is a very small concentration: one part of a substance per trillion parts of water. PFAS results and limits are commonly expressed in parts per trillion.