Is Tap Water Safe to Drink in Boston?

DetoxWater Editorial Team•Published November 5, 2026

Mostly yes, but an EPA violation is open: Boston Water and Sewer Commission (MWRA) has an open treatment-technique violation involving a required treatment or lead-control step, though that does not by itself mean a contaminant limit is being exceeded.

What does Boston’s EPA verdict mean?

The EPA record flags a health-based violation for Boston Water and Sewer Commission (MWRA) under the Lead and Copper Rule. The open violation is classified as a treatment-technique violation, meaning a required treatment or lead-control step was not met. The record alone does not establish that a contaminant limit is currently being exceeded.

The utility’s record also cannot tell you what is in water after it passes through your building’s plumbing. For a broader comparison, see tap water safety by state.

Who supplies Boston’s water, and where does it come from?

EPA lists Boston Water and Sewer Commission (MWRA) as a local-government system that purchases surface water. MWRA is listed separately as a state-government system using surface water.

The systems serve different populations, so their records should be read separately. If you are unsure which system is responsible for your address, check your water bill or contact your water supplier.

What does EPA’s three-year violation record show?

SystemPeople servedHealth-based violation in the last 3 years?Open violationLead action-level exceedances reported in the last 3 years
Boston Water and Sewer Commission (MWRA)675,647 peopleYesYes: Lead and Copper Rule treatment-technique violation4
MWRA2,580,000 peopleNoNone reportedNone reported

For Boston Water and Sewer Commission (MWRA), EPA reports violations in 12 of the last 12 quarters. The record lists one rule in violation: the Lead and Copper Rule. It does not establish the lead concentration at any particular home.

MWRA’s separate record reports no health-based violations in the last three years and no violations in the last 12 quarters. For details about the open violation and current instructions, consult Boston Water and Sewer Commission’s notices and annual water quality report.

What did PFAS testing find in Boston?

EPA’s fifth Unregulated Contaminant Monitoring Rule survey, known as UCMR 5, ran nationally from 2023 through 2025. Boston Water and Sewer Commission (MWRA) samples in EPA’s occurrence data were collected from January 10 through October 22, 2024.

PFASSamples with detectionsReporting limitEPA limit
PFOA0 of 4 samples4.0 parts per trillion (ppt)4.0 ppt
PFOS0 of 4 samples4.0 ppt4.0 ppt

Neither PFOA nor PFOS was detected at its reporting limit, so there was no detected maximum to compare with EPA’s 4.0 ppt limits. Not detected does not mean zero: a substance could be present below the reporting limit. These survey results are not, by themselves, a current compliance determination; compliance is based on running annual averages.

The survey also reported no detections of PFBS, PFHxS, PFNA or HFPO-DA, also called GenX, in the four samples tested for each. MWRA was not listed separately in the UCMR 5 results.

Can household plumbing add lead to the water?

Yes. Lead can enter drinking water from a service line or plumbing materials in a building, so the utility’s record does not substitute for a test at your tap. EPA’s lead action level is 15 parts per billion (ppb), while its health goal for lead is zero; an action-level result is not a guarantee about every individual tap.

The four reported lead action-level exceedances are counts in the system record, not four test results from your home. Ask your water supplier about your service line and how to arrange a tap test. Our guide to how to test water quality at home explains what to consider when choosing a test.

Who should take extra care?

Pregnant people, infants and young children are especially vulnerable to lead exposure. If lead is a concern, use cold water passed through a filter certified to reduce lead, or use bottled water, for drinking and preparing infant formula. Contact a clinician if you are concerned about exposure and ask whether blood lead testing is appropriate.

What about ice, brushing teeth and washing produce?

The EPA record does not establish whether water at a particular tap is suitable for these uses. Check the utility’s current notices for any use-specific guidance, and follow the instructions in any advisory.

If you have a household lead concern, use water from a filter certified to reduce lead, or bottled water, for making ice, brushing teeth and washing produce. Boiling does not remove lead or PFAS and can concentrate them; a boil-water advisory for germs is different from an advisory about chemical contamination.

How can you get extra protection?

Start with a tap test if you want to know about lead in your household water. A system-wide record or neighborhood result cannot establish the concentration at your own faucet.

If you choose a filter, look for independent certification to reduce the specific contaminants you are concerned about. For lead, check for a lead-reduction claim under NSF/ANSI Standard 53 or 58; for PFAS, check for a specific PFOA and PFOS reduction claim. Follow the manufacturer’s installation and cartridge-replacement instructions, and see our guide to the best pitcher water filters. Certification does not guarantee that filtered water will meet every EPA limit.

Where does this information come from?

The violation and population figures come from EPA’s Safe Drinking Water Act data in ECHO, retrieved on November 3, 2026. Read the detailed reports for Boston Water and Sewer Commission (MWRA) and MWRA.

PFAS figures come from EPA’s UCMR 5 occurrence data file dated October 15, 2026. Records can change, so check the utility’s current notices and annual water quality report for updates.

Frequently asked questions

Should the two systems’ population-served figures be added to find Boston’s population?

No. The figures describe populations served by separate water systems and should not be added to estimate Boston’s population.

What does parts per trillion mean in a PFAS result?

Parts per trillion, or ppt, is a measure of concentration. It describes a very small amount of a substance relative to the amount of water.

Do the 2024 PFAS results describe every home’s water today?

No. They describe samples collected during the survey period, not a current test at every household tap.